OpenLegislation

Commission Delegated Regulation (EU) No 874/2012 of 12 July 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires (Text with EEA relevance) (revoked)

EU Regulation No 874/2012 · Adopted 12 July 2012 · Extends to United Kingdom

Original text. legislation.gov.uk does not revise this item, so later amendments are not shown here. Changes made to it are listed under each provision when known.

Commission Delegated Regulation (EU) No 874/2012

of 12 July 2012

supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires

(Text with EEA relevance) (revoked)

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annotations to the whole text

Textual amendments

F1

Regulation revoked (1.10.2021) by The Ecodesign for Energy-Related Products and Energy Information (Lighting Products) Regulations 2021 (S.I. 2021/1095), regs. 1(2), 19(c) (with reg. 23(1))

Contents

  1. 1Subject matter and scope Repealed
  2. 2Definitions Repealed
  3. 3Responsibilities of suppliers Repealed
  4. 4Responsibilities of dealers Repealed
  5. 5Measurement methods Repealed
  6. 6Verification procedure for market surveillance purposes Repealed
  7. 7Revision Repealed
  8. 8Repeal Repealed
  9. 9Transitional provisions Repealed
  10. 10Entry into force and application Repealed
  11. Signature
  12. Annex I: Label Repealed
  13. 1LABEL FOR ELECTRICAL LAMPS PRESENTED AT A POINT OF SALE Repealed
  14. LABEL FOR LUMINAIRES PRESENTED AT A POINT OF SALE Repealed
  15. (1)The label shall be the relevant language version, and shall be as shown in the following illustration, or as in variants defined under points (2) and (3): Repealed
  16. (2)The following information shall be included in the label: Repealed
  17. (3)The following illustrations provide examples of typical luminaire labels in addition to the illustration in point (1), without showing all possible combinations: Repealed
  18. (4)The design of the label shall be as in the figures below: Repealed
  19. Annex IIProduct fiche for electrical lamps Repealed
  20. Annex IIITechnical documentation Repealed
  21. Annex IV: Information to be provided in cases where final owners cannot be expected to see the product displayed Repealed
  22. 1The information referred to in Article 4(1)(a) shall be provided in the following order: Repealed
  23. 2Division 2 Repealed
  24. 3Division 3 Repealed
  25. Annex VProduct compliance verification by market surveillance authorities Repealed
  26. 1VERIFICATION PROCEDURE FOR ELECTRICAL LAMPS AND LED MODULES MARKETED AS INDIVIDUAL PRODUCTS Repealed
  27. 2VERIFICATION PROCEDURE FOR LUMINAIRES INTENDED TO BE MARKETED OR MARKETED TO THE END-USER Repealed
  28. Annex VIEnergy efficiency classes Repealed
  29. Annex VII: Method for calculating the energy efficiency index and energy consumption Repealed
  30. 1CALCULATION OF THE ENERGY EFFICIENCY INDEX Repealed
  31. 2CALCULATION OF THE ENERGY CONSUMPTION Repealed
  32. Annex VIII: Information to be provided in the case of sale, hire or hire-purchase through the internet Repealed
  33. (1)For the purpose of points 2 to 4 of this Annex the following definitions shall apply: Repealed
  34. (2)Division (2) Repealed
  35. (3)The image used for accessing the label in the case of nested display shall: Repealed
  36. (4)In the case of nested display, the sequence of display of the label shall be as follows: Repealed

1Subject matter and scopeF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2DefinitionsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3Responsibilities of suppliersF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4Responsibilities of dealersF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5Measurement methodsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6Verification procedure for market surveillance purposesF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7RevisionF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8RepealF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9Transitional provisionsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10Entry into force and applicationF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Signature

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1LABEL FOR ELECTRICAL LAMPS PRESENTED AT A POINT OF SALEF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(1)The label shall be the relevant language version, and shall be as shown in the following illustration, or as in variants defined under points (2) and (3):F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(2)The following information shall be included in the label:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(3)The following illustrations provide examples of typical luminaire labels in addition to the illustration in point (1), without showing all possible combinations:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(4)The design of the label shall be as in the figures below:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex IIProduct fiche for electrical lampsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex IIITechnical documentationF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1The information referred to in Article 4(1)(a) shall be provided in the following order:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex VProduct compliance verification by market surveillance authoritiesF1

The verification tolerances set out in this Annex relate only to the verification of the measured parameters by Great Britain authorities and shall not be used by the supplier as an allowed tolerance to establish the values in the technical documentation. The values and classes on the label or in the product fiche shall not be more favourable for the supplier than the values reported in the technical documentation.

When verifying the compliance of a product model with the requirements laid down in this Delegated Regulation, for the requirements referred to in this Annex, the authorities of the Great Britain shall apply the following procedure:

1VERIFICATION PROCEDURE FOR ELECTRICAL LAMPS AND LED MODULES MARKETED AS INDIVIDUAL PRODUCTSF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2VERIFICATION PROCEDURE FOR LUMINAIRES INTENDED TO BE MARKETED OR MARKETED TO THE END-USERF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex VIEnergy efficiency classesF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1CALCULATION OF THE ENERGY EFFICIENCY INDEXF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2CALCULATION OF THE ENERGY CONSUMPTIONF1

The weighted energy consumption (Ec ) is calculated in kWh/1 000 h as follows and is rounded to two decimal places:

Ec=Pcor×10001000

Where Pcor is the power corrected for any control gear losses in accordance with part 1 above.

(1)For the purpose of points 2 to 4 of this Annex the following definitions shall apply:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(2)F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(3)The image used for accessing the label in the case of nested display shall:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(4)In the case of nested display, the sequence of display of the label shall be as follows:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .