OpenLegislation

Annex III Measurements by market surveillance authorities and product compliance verification by market surveillance authoritiesF1

United Kingdom

Original text. Later amendments are not shown.

The verification tolerances defined in this Annex relate only to the verification of the measured parameters by F2Great Britain authorities and shall not be used by the manufacturer or importer as an allowed tolerance to establish the values in the technical documentation or in interpreting these values with a view to achieving compliance or to communicate better performance by any means.

  1. 1MEASUREMENTS
  2. 2PRODUCT COMPLIANCE VERIFICATION BY MARKET SURVEILLANCE AUTHORITIES
  3. 3E TEC , SLEEP MODE, OFF MODE AND LOWEST POWER STATE:
  4. 4INTERNAL POWER SUPPLY EFFICIENCY
  5. 5POWER MANAGEMENT ENABLING

Annotations

Textual amendments

F1

Substituted by Commission Regulation (EU) 2016/2282 of 30 November 2016 amending Regulations (EC) No 1275/2008, (EC) No 107/2009, (EC) No 278/2009, (EC) No 640/2009, (EC) No 641/2009, (EC) No 642/2009, (EC) No 643/2009, (EU) No 1015/2010, (EU) No 1016/2010, (EU) No 327/2011, (EU) No 206/2012, (EU) No 547/2012, (EU) No 932/2012, (EU) No 617/2013, (EU) No 666/2013, (EU) No 813/2013, (EU) No 814/2013, (EU) No 66/2014, (EU) No 548/2014, (EU) No 1253/2014, (EU) 2015/1095, (EU) 2015/1185, (EU) 2015/1188, (EU) 2015/1189 and (EU) 2016/2281 with regard to the use of tolerances in verification procedures (Text with EEA relevance).

F2

Words in Annex 3 substituted (31.12.2020) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/539), reg. 1(3), Sch. 2 para. 17(7)(a) (as amended by S.I. 2020/1528, regs. 1(2), 6(1)(2)(b)(xvi)); 2020 c. 1, Sch. 5 para. 1(1)