OpenLegislation

Division 4.3.4 Interface with Control — Command and Signalling subsystemsF1

United Kingdom Repealed

Original text. Later amendments are not shown.

  1. (1)

    The interface for power control is an interface between the energy and the rolling stock subsystems.

  2. (2)

    However, the information is transmitted via the control-command and signalling subsystems and consequently the transmission interface is specified in the CCS TSI and the LOC & PAS TSI.

  3. (3)

    The relevant information to perform the switching of the circuit breaker, change of maximum train current, change of the power supply system and pantograph management shall be transmitted via ERTMS when the line is equipped with ERTMS.

  4. (4)

    Harmonic currents affecting control-command and signalling subsystems are set out in the CCS TSI.

Annotations

Textual amendments

F1

Regulation revoked (31.12.2020) by The Railways (Interoperability) (Miscellaneous Amendments and Revocations) (EU Exit) Regulations 2020 (S.I. 2020/318), reg. 1(2)(c), Sch. 2