Division ML.A.201 ResponsibilitiesF1X1

The owner of the aircraft shall be responsible for the continuing airworthiness of the aircraft and shall ensure that no flight takes place unless all of the following requirements are met:

1. (1)

   the aircraft is maintained in an airworthy condition;

2. (2)

   any operational and emergency equipment fitted is correctly installed and serviceable or clearly identified as unserviceable;

3. (3)

   the airworthiness certificate is valid;

4. (4)

   the maintenance of the aircraft is performed in accordance with the Aircraft Maintenance Program ( ‘ AMP ’ ) specified in point ML.A.302.

By derogation from point (a), where the aircraft is leased, the responsibilities set out in point (a) shall apply to the lessee, if the lessee is identified either in the registration document of the aircraft or in the leasing contract.

Any person or organisation performing maintenance of aircraft and components shall be responsible for the maintenance tasks being performed.

The pilot-in-command of the aircraft shall be responsible for the satisfactory accomplishment of the preflight inspection. That inspection shall be carried out by the pilot or another qualified person but need not be carried out by an approved maintenance organisation or by certifying staff.

For aircraft operated by commercial Approved Training Organisations (‘ATO’) and commercial Declared Training Organisations (‘DTO’) referred to in Article 10a of Regulation (EU) No 1178/2011 or not operated in accordance with Annex VII to Regulation (EU) No 965/2012 (Part-NCO) or operated in accordance with Subpart-ADD of Annex II (Part-BOP) to Regulation (EU) 2018/395 or Subpart-DEC of Annex II (Part-SAO) to Regulation (EU) 2018/1976 ^f1 , the operator shall:

1. (1)

   F2be approved as a CAMO or as a CAO for the management of the continuing airworthiness of its aircraft in accordance with Annex Vc (Part-CAMO), Subpart G of Annex I (Part-M) or Annex Vd (Part-CAO), or contract such an organisation using the contract set out in Appendix I to this Annex;

2. (2)

   ensure that all maintenance is performed by maintenance organisations approved in accordance with point (c)(2) of point ML.1.;

3. (3)

   ensure that the requirements of point (a) are satisfied.

For aircraft not included in point (e), in order to satisfy the requirements of point (a), the owner of the aircraft may contract the tasks associated with continuing airworthiness management to an organisation approved as a CAMO or CAO in accordance with Annex Vc (Part-CAMO), Subpart G of Annex I (Part-M) or Annex Vd (Part-CAO). In that case, the contracted organisation shall assume responsibility for the proper performance of those tasks and a written contract shall be concluded in accordance with Appendix I to this Annex. If the owner does not contract such an organisation, the owner is responsible for the proper performance of the tasks associated with the continuing airworthiness management.

The owner shall grant the F3CAA access to the aircraft and the aircraft records, in order for the CAA to determine whether the aircraft complies with the requirements of this Annex.

In the case of an aircraft included in an air operator certificate is used for non-commercial or specialised operations under point ORO.GEN.310 of Annex III or point NCO.GEN.104 of Annex VII to Regulation (EU) No 965/2012 ^f2 , the operator shall ensure that the tasks associated with continuing airworthiness are performed by the CAMO approved in accordance with Annex Vc (Part-CAMO) or Subpart G of Annex I (Part-M) or the combined airworthiness organisation (‘CAO’) approved in accordance with Annex Vd (Part-CAO), whichever applicable, of the air operator certificate holder.