Article 11 Detailed provisions for smart tachographs

F1In order to ensure that smart tachographs comply with the principles and requirements set out in this Regulation, F2the Secretary of State may, by regulations, make detailed provisions necessary for the F3... application of Articles 8, 9 and 10, excluding any provisions which would provide for the recording of additional data by the tachograph.

F4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The detailed provisions referred to in the F6first paragraph of this Article shall:

1. (a)

   in relation to the performance of the functions of the smart tachograph as referred to in this Chapter, include the necessary requirements to guarantee the security, accuracy and reliability of data as provided to the tachograph by the satellite positioning service and the remote communication technology referred to in Articles 8 and 9;

2. (b)

   specify the various conditions and requirements for the satellite positioning service and the remote communication technology referred to in Articles 8 and 9 to be either outside or embedded in the tachograph and, when outside, specify the conditions for the use of the satellite positioning signal as a second motion sensor;

3. (c)

   specify the necessary standards for the interface referred to in Article 10. Such standards may include a provision on the distribution of access rights for drivers, workshops and transport undertakings, and control roles for the data recorded by the tachograph, which control roles shall be based on an authentication/authorisation mechanism defined for the interface, such as a certificate for each level of access and subject to the technical feasibility thereof.