Article 4 Conformity assessment

For the purposes of regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010, the procedure for assessing whether an energy-related product complies with this implementing measure is the internal design control system set out in Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 or the management system for assessing conformity set out in Part 2 of Schedule 1A to those Regulations.

For the purposes of conformity assessment pursuant to F2regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010, the technical documentation file shall contain a copy of the calculation set out in Annex II to this Regulation.

Where the information included in the technical documentation for a model has been obtained by calculation on the basis of design, or extrapolation from other equivalent appliances, or both, the technical documentation shall include details of such calculations or extrapolations, or both, and of tests undertaken by manufacturers to verify the accuracy of the calculations undertaken. In such cases, the technical documentation shall also include a list of all other equivalent models where the information contained in the technical documentation was obtained on the same basis.

If the manufacturer or importer places on the market equivalent models, the manufacturer or importer shall include a list of all other equivalent models.