Commission Delegated Regulation (EU) 2015/208 of 8 December 2014 supplementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to vehicle functional safety requirements for the approval of agricultural and forestry vehicles (Text with EEA relevance)
EU Regulation 2015/208 · Adopted 8 December 2014 · Extends to United Kingdom
Commission Delegated Regulation (EU) 2015/208
of 8 December 2014
supplementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to vehicle functional safety requirements for the approval of agricultural and forestry vehicles
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 167/2013 of the European Parliament and of the Council of 5 February 2013 on the approval and market surveillance of agricultural and forestry vehiclesf1, and in particular Article 17(5) and Article 49(3),
Whereas:
(1)
The internal market comprises an area without internal frontiers in which the free movement of goods, persons, services and capital is ensured. To that end, a comprehensive EU type-approval system and a strengthened market surveillance system for agricultural and forestry vehicles and their systems, components and separate technical units as defined by Regulation (EU) No 167/2013 apply.
(2)
Agricultural and forestry vehicles falling under the definition of ‘tractor’ set out in Article 3(8) of Regulation (EU) No 167/2013, on which machinery is mounted, should be type-approved in accordance with Article 77 of that Regulation.
(3)
That mounted machinery enables tractors to be used for a wide variety of agricultural and forestry purposes, including special purpose works. Therefore, that mounted machinery should be subject to Directive 2006/42/EC of the European Parliament and of the Councilf2, as set out in Article 77 of Regulation (EU) No 167/2013.
(4)
By Council Decision 97/836/ECf3, the Union acceded to the Agreement of the United Nations Economic Commission for Europe (UNECE) concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted to and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions (‘Revised 1958 Agreement’). In its communication CARS 2020: Action Plan for a competitive and sustainable automotive industry in Europe, the Commission highlighted that the acceptance of international regulations under the 1958 UNECE Agreement is the best way to remove non-tariff barriers to trade.
(5)
By Decision 97/836/EC, the Union also acceded to UNECE Regulations Nos 3, 4, 5, 6, 7, 19, 23, 31, 37, 38, 43, 71, 79, 98 and 99.
(6)
In the Union, some of the requirements under regulations on vehicle parts are taken over from the corresponding UNECE regulations. As technology progresses, UNECE regulations are constantly amended and the relevant Union regulations have to be regularly updated to keep them in line with the content of the respective UNECE regulations.
(7)
The possibility to apply UNECE regulations for the purpose of EU vehicle type-approval as a basis to Union legislation is provided for in Regulation (EU) No 167/2013. According to that Regulation, type-approval in accordance with UNECE regulations which apply on an equal basis to Union legislation is to be considered as EU type-approval in accordance with that Regulation and its delegated and implementing acts.
(8)
Using UNECE regulations on an equal basis to Union legislation helps to avoid duplication not only of technical requirements but also of certification and administrative procedures. In addition, type-approval that is directly based on internationally agreed standards should improve market access in third countries, in particular in those which are contracting parties to the Revised 1958 Agreement, thus enhancing the competitiveness of Union industry.
(9)
It is appropriate to include UNECE Regulations Nos 3, 4, 5, 6, 7, 19, 23, 31, 37, 38, 43, 71, 79, 98, 99, 106, 112, 113 in Annex I to this Regulation, which lists the UNECE regulations that apply on an equal basis to Union legislation.
(10)
Article 17 of Regulation (EU) No 167/2013 and Annex I to that regulation lay down functional safety requirements previously covered in Directives repealed in that Regulation. While the requirements laid down in this Regulation have to a large extent been carried over from those repealed directives, important modifications should be introduced where necessary to update to technical progress, extend the scope to further vehicle categories or to increase the level of safety as regards, for example: steerability, glazing, dimensions and masses, tyres and mechanical couplings are deemed paramount for the functional safety of agricultural and forestry vehicles. Requirements regarding the maximum design speed, speed governor and speed-limitation devices should be introduced to address specific characteristics of agricultural and forestry tractors that are designed for off-road use but that travel also on hard-paved public roads.
(11)
Where manufacturers may choose to apply for national type-approval in accordance with Article 2 of Regulation (EU) No 167/2013, Member States should, for all subjects covered in this Regulation be free to set requirements for the purposes of national type-approval which are different from the requirements of this Regulation.
For the purposes of national type-approval, national authorities may not, on grounds relating to the functional safety, refuse to approve types of vehicles, systems, components and separate technical units which are compliant with the requirements provided for in this Regulation, with the exception of the requirements on certain subjects, as some Member States have stricter requirements at national level.
(12)
Member States should prohibit the making available on the market, registration, or entry into service of new vehicles not complying with the requirements of this Regulation as from the same date as provided for in Regulation 167/2013 and the other delegated acts adopted thereunder.
(13)
In order to allow for a uniform application date of all new type-approval rules, this Regulation should apply as from 1 January 2016, date of application of Regulation (EU) No 167/2013,
HAS ADOPTED THIS REGULATION:
Annotations to the whole text
Footnotes
- f1
- f2
-
Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (OJ L 157, 9.6.2006, p. 24).
- f3
-
Council Decision 97/836/EC of 27 November 1997 with a view to accession by the European Community to the Agreement of the United Nations Economic Commission for Europe concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted to and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions (Revised 1958 Agreement) (OJ L 346, 17.12.1997, p. 78).
Contents
- Chapter I: SUBJECT MATTER AND DEFINITIONS
- 1Subject matter
- 2Definitions
- Chapter II: VEHICLE FUNCTIONAL SAFETY REQUIREMENTS
- 3Fitting and demonstration requirements related to functional safety
- 4Application of UNECE regulations
- 5Technical specifications on functional safety requirements and test procedures
- 6Requirements on vehicle structure integrity
- 7Requirements on the maximum design speed, speed governors and speed-limitation devices
- 8Requirements on steering for fast tractors
- 9Requirements on steering
- 10Requirements on speedometers
- 11Requirements on the field of vision and windscreen wipers
- 12Requirements on glazing
- 13Requirements on rear-view mirrors
- 14Requirements on driver information systems
- 15Requirements on lighting, light-signalling devices and their light sources
- 16Requirements on lighting installations
- 17Requirements on vehicle occupant protection, including interior fittings, head restraints, seat belts, vehicle doors
- 18Requirements on vehicle exterior and accessories
- 19Requirements on the electromagnetic compatibility
- 20Requirements on audible warning devices
- 21Requirements on heating systems
- 22Requirements on devices to prevent unauthorised use
- 23Requirements on registration plates
- 24Requirements on statutory plates and markings
- 25Requirements on dimensions and trailer masses
- 26Requirements on the maximum laden mass
- 27Requirements on ballast masses
- 28Requirements on the safety of electrical systems
- 29Requirements on fuel tanks
- 30Requirements on rear protective structures
- 31Requirements on lateral protection
- 32Requirements on load platforms
- 33Requirements on towing devices
- 34Requirements on tyres
- 35Requirements on spray-suppression systems
- 36Requirements on the reverse gear
- 37Requirements on tracks
- 38Requirements on mechanical couplings
- Chapter III: OBLIGATIONS OF THE MEMBER STATES
- 39Type-approval of vehicles, systems, components and separate technical units
- 40National type-approval of vehicles, systems, components and separate technical units
- Chapter IV: FINAL PROVISIONS
- 40aTransitional provisions
- 41Entry into force and application
- Signature
1Subject matter
This Regulation establishes the detailed technical requirements and test procedures regarding functional safety, except with respect to braking performance, for the approval and market surveillance of agricultural and forestry vehicles and the systems, components and separate technical units intended for such vehicles in accordance with Regulation (EU) No 167/2013.
2Definitions
The definitions of Regulation (EU) No 167/2013 shall apply. In addition, the following definitions shall apply:
- (1)
‘Towing device’ means a component on the tractor designed to provide a mechanical link between the tractor and a towing vehicle to tow the tractor away in case it cannot be self-propelled;
- (2)
‘Unladen mass in running order’ of a vehicle means the mass of the unladen vehicle ready for normal use and including the standard equipment in accordance with the manufacturer’s specifications, coolant, lubricants, fuel, tools and driver (considered equal to 75 kg) and excluding optional accessories;
- (3)
‘Steering control’ means the part directly operated by the driver in order to steer the tractor;
- (4)
‘Steering effort’ means the force exerted by the driver on the steering control in order to steer the tractor;
- (5)
- (6)
‘ Tracks normally fitted ’ means the type or types of track provided by the manufacturer on the vehicle type in question and specified in the information document the template of which is set out in Article 2 of Implementing Regulation (EU) 2015/504;
- (7)
‘Rear-view mirror’ means any device intended to give, within the field of vision geometrically defined in point 5 of Annex IX, a clear view to the rear which, within reasonable limits, is not blocked by component parts of the tractor or by the occupants of the tractor itself;
- (8)
‘Interior rear-view mirror’ means a rear-view mirror which is fitted inside the cab or frame of a tractor;
- (9)
‘Class of rear-view mirror’ means all rear-view mirrors having one or more common characteristics or functions;
- (10)
‘Lamp’ means a device designed to illuminate the road (headlamp) or to emit a light signal;
- (11)
‘Tractor wheelbase’ or ‘Vehicle wheelbase’ means the distance between the vertical planes perpendicular to the median longitudinal plane of the tractor or of the vehicle passing through the axles of the tractor or of the vehicle;
- (12)
‘ Laden vehicle ’ means a vehicle loaded at its technically permissible maximum laden mass;
- (13)
F2‘ Cab ’ means the operator enclosure which surrounds the operator by means of a physical barrier and prevents the free passage of external air into the area of the operator.
3Fitting and demonstration requirements related to functional safety
Manufacturers shall equip agricultural and forestry vehicles with systems, components and separate technical units affecting their functional safety that are designed, constructed and assembled so as to enable the vehicle in normal use and maintained according to the prescriptions of the manufacturer to comply with the detailed technical requirements and testing procedures laid down in Articles 5 to 38.
Manufacturers shall demonstrate by means of physical demonstration testing to the approval authority that the agricultural and forestry vehicles made available on the market, registered or entering into service in the Union comply with the functional safety requirements laid down in Article 17 of Regulation (EU) No 167/2013 and Annex I to that Regulation and comply with the detailed technical requirements and test procedures laid down in Articles 5 to 38 of this Regulation.
Manufacturers shall ensure that spare parts that are made available on the market or are entering into service in the Union comply with the detailed technical requirements and test procedures laid down in this Regulation.
Manufacturers shall submit to the approval authority a description of the measures taken to prevent tampering with, and modification of, the powertrain management system, including the functional safety electronic control computers, where fitted.
4Application of UNECE regulations
The UNECE regulations and amendments thereto set out in Annex I to this Regulation shall apply to type-approval of agricultural and forestry vehicles.
5Technical specifications on functional safety requirements and test procedures
The functional safety performance test procedures shall be performed in accordance with the test requirements laid down in this Regulation.
The tests shall be carried out or witnessed by the approval authority or, where authorised by the approval authority, by the technical service.
The measurement methods and test results shall be reported to the approval authority in the test report format set out in Article 9 of Implementing Regulation (EU) 2015/504.
6Requirements on vehicle structure integrity
The performance requirements applying to vehicle structure integrity referred to in Article 17(2)(a) of Regulation (EU) No 167/2013 shall be verified in accordance with Annex II to this Regulation.
7Requirements on the maximum design speed, speed governors and speed-limitation devices
The test procedures and performance requirements applying to speed, speed governors and speed-limitation devices referred to in Article 17(2)(b) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex III to this Regulation.
8Requirements on steering for fast tractors
The test procedures and performance requirements applying to steering for fast tractors referred to in Article 17(2)(b) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex IV to this Regulation.
9Requirements on steering
The test procedures and performance requirements applying to steering referred to in Article 17(2)(b) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex V to this Regulation.
10Requirements on speedometers
The test procedures and performance requirements applying to speedometer referred to in Article 17(2)(b) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex VI to this Regulation.
11Requirements on the field of vision and windscreen wipers
The test procedures and performance requirements applying to field of vision and windscreen wipers referred to in Article 17(2)(c) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex VII to this Regulation.
12Requirements on glazing
The test procedures and requirements applying to glazing referred to in Article 17(2)(c) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex VIII to this Regulation.
13Requirements on rear-view mirrors
The test procedures and performance requirements applying to rear view mirrors referred to in Article 17(2)(c) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex IX to this Regulation.
14Requirements on driver information systems
The test procedures and requirements applying to driver information systems referred to in Article 17(2)(c) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex X to this Regulation.
15Requirements on lighting, light-signalling devices and their light sources
The test procedures and performance requirements applying to lighting, light-signalling devices and their light sources referred to in Article 17(2)(d) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XI to this Regulation.
16Requirements on lighting installations
The test procedures and requirements applying to lighting installations referred to in Article 17(2)(d) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XII to this Regulation.
17Requirements on vehicle occupant protection, including interior fittings, head restraints, seat belts, vehicle doors
The test procedures and performance requirements applying to occupant protection, including interior fittings, head restraint, seat belts and vehicle doors referred to in Article 17(2)(e) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XIII to this Regulation.
18Requirements on vehicle exterior and accessories
The test procedures and requirements applying to vehicle exterior and accessories referred to in Article 17(2)(f) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XIV to this Regulation.
19Requirements on the electromagnetic compatibility
The test procedures and performance requirements applying to electromagnetic compatibility referred to in Article 17(2)(g) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XV to this Regulation.
20Requirements on audible warning devices
The test procedures and performance requirements applying to audible warning devices referred to in Article 17(2)(h) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XVI to this Regulation.
21Requirements on heating systems
The test procedures and performance requirements applying to heating systems referred to in Article 17(2)(i) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XVII to this Regulation.
22Requirements on devices to prevent unauthorised use
The test procedures and performance requirements applying to devices to prevent unauthorised use referred to in Article 17(2)(j) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XVIII to this Regulation.
23Requirements on registration plates
The test procedures and requirements applying to registration plates referred to in Article 17(2)(k) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XIX to this Regulation.
24Requirements on statutory plates and markings
The requirements applying to statutory plates and marking referred to in Article 17(2)(k) of Regulation (EU) No 167/2013 shall be verified in accordance with Annex XX to this Regulation.
25Requirements on dimensions and trailer masses
The test procedures and requirements applying to dimensions and trailer masses referred to in Article 17(2)(l) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XXI to this Regulation.
26Requirements on the maximum laden mass
The test procedures and requirements applying to the maximum laden mass referred to in Article 17(2)(l) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XXII to this Regulation.
27Requirements on ballast masses
The test procedures and requirements applying to ballast masses referred to in Article 17(2)(l) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XXIII to this Regulation.
28Requirements on the safety of electrical systems
The requirements applying to electrical systems referred to in Article 17(2)(m) of Regulation (EU) No 167/2013 shall be verified in accordance with Annex XXIV to this Regulation.
29Requirements on fuel tanks
The test procedures and performance requirements applying to fuel tanks referred to in Article 17(2)(a) and (m) and 18(2)(l) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XXV to this Regulation.
30Requirements on rear protective structures
The test procedures and performance requirements applying to rear protective structures referred to in Article 17(2)(n) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XXVI to this Regulation.
31Requirements on lateral protection
The test procedures and requirements applying to lateral protection referred to in Article 17(2)(o) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XXVII to this Regulation.
32Requirements on load platforms
The test procedures and requirements applying to load platforms referred to in Article 17(2)(p) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XXVIII to this Regulation.
33Requirements on towing devices
The performance requirements applying to towing devices referred to in Article 17(2)(q) of Regulation (EU) No 167/2013 shall be verified in accordance with Annex XXIX to this Regulation.
34Requirements on tyres
The test procedures and performance requirements applying to tyres referred to in Article 17(2)(r) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XXX to this Regulation.
35Requirements on spray-suppression systems
The test procedures and performance requirements applying to spray-suppression systems referred to in Article 17(2)(s) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XXXI to this Regulation.
36Requirements on the reverse gear
The requirements applying to the reverse gear referred to in Article 17(2)(t) of Regulation (EU) No 167/2013 shall be verified in accordance with Annex XXXII to this Regulation.
37Requirements on tracks
The test procedures and performance requirements applying to tracks referred to in Article 17(2)(u) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XXXIII to this Regulation.
38Requirements on mechanical couplings
The test procedures and performance requirements applying to mechanical couplings referred to in Article 17(2)(v) of Regulation (EU) No 167/2013 shall be conducted and verified in accordance with Annex XXXIV to this Regulation.
39Type-approval of vehicles, systems, components and separate technical units
With effect from 1 January 2018, national authorities shall, in the case of new vehicles that do not comply with Regulation (EU) No 167/2013 and this Regulation on functional safety, prohibit the making available on the market, registration, or entry into service of such vehicles.
40National type-approval of vehicles, systems, components and separate technical units
National authorities shall not refuse to grant national type-approval to a type of vehicle, system, component or separate technical unit on grounds relating to functional safety where the vehicle, system, component or separate technical unit complies with the requirements set out in this Regulation, with the exception of requirements on the following:
- (a)
vehicle dimensions and trailer mass set out in Article 25;
- (b)
maximum laden mass set out in Article 26;
- (c)
mean ground contact pressure and maximum load per track roller for tractors of category C set out in Article 37;
- (d)
signalling panels and foils, set out in Article 16, of S-category vehicles with width exceeding 2,55 m.
40aTransitional provisionsF1
Notwithstanding the application of the provisions of this Regulation, as amended by Commission Delegated Regulation (EU) 2018/829 f1 , national authorities shall, until 31 December 2018 , also continue to grant type-approvals to agricultural and forestry vehicle types, or types of systems, components or separate technical units in accordance with this Regulation, in its version applicable on 8 June 2018 .
Notwithstanding the application of the provisions of this Regulation, as amended by Delegated Regulation (EU) 2018/829, the Member States shall, until 30 June 2019 , also permit the placing on the market, registration or entry into service of agricultural and forestry vehicles, systems, components or separate technical units based on a type approved in accordance with this Regulation, in its version applicable on 8 June 2018 .
41Entry into force and application
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
It shall apply as of 1 January 2016.
Signature
This Regulation shall be binding in its entirety and directly applicable in all Member States.
LIST OF ANNEXES
| F1Annex Number | Annex title |
|---|---|
| I | List of applicable UNECE regulations |
| II | Requirements on vehicle structure integrity |
| III | Requirements on the maximum design speed, speed governors and speed limitation devices |
| IV | Requirements on steering for fast tractors |
| V | Requirements on steering |
| VI | Requirements on speedometers |
| VII | Requirements on the field of vision and windscreen wipers |
| VIII | Requirements on glazing |
| IX | Requirements on rear-view mirrors |
| X | Requirements on driver information systems |
| XI | Requirements on lighting, light-signalling devices and their light sources |
| XII | Requirements on lighting installations |
| XIII | Requirements on vehicle occupant protection, including interior fittings, head restraints, seat belts, vehicle doors |
| XIV | Requirements on vehicle exterior and accessories |
| XV | Requirements on the electromagnetic compatibility |
| XVI | Requirements on audible warning devices |
| XVII | Requirements on heating systems |
| XVIII | Requirements on devices to prevent unauthorised use |
| XIX | Requirements on registration plates |
| XX | Requirements on statutory plates and markings |
| XXI | Requirements on dimensions and trailer masses |
| XXII | Requirements on the maximum laden mass |
| XXIII | Requirements on ballast masses |
| XXIV | Requirements on the safety of electrical systems |
| XXV | Requirements on fuel tanks |
| XXVI | Requirements on rear protective structures |
| XXVII | Requirements on lateral protection |
| XXVIII | Requirements on load platforms |
| XXIX | Requirements on towing devices |
| XXX | Requirements on tyres |
| XXXI | Requirements on spray-suppression systems |
| XXXII | Requirements on the reverse gear |
| XXXIII | Requirements on tracks |
| XXXIV | Requirements on mechanical couplings |
ANNEX I
List of applicable UNECE regulations
| Regulation Number | Subject | Series of amendments | OJ Reference | Applicability |
|---|---|---|---|---|
| F11 | Lighting installation | Incorporating all valid text up to 02 series of amendments | OJ L 177, 10.7.2010, p. 1 | T and C |
| 3 | Lighting, light-signalling devices and their light sources | Supplement 12 to the 02 series of amendments | OJ L 323, 6.12.2011, p. 1 | T, C, R and S |
| 4 | Lighting, light-signalling devices and their light sources | Supplement 14 to the original version of the Regulation Supplement 15 to the original version of the Regulation | T, C, R and S | |
| 5 | Lighting, light-signalling devices and their light sources | Incorporating all valid text up to 03 series of amendments | OJ L 162, 29.5.2014, p. 1 | T and C |
| F2 | ||||
| 6 | Lighting, light signalling devices and their light sources | Supplement 18 to the 01 series of amendments Corrigendum 1 to Supplement 18 Supplement 19 to the 01 series of amendments | OJ L 177, 10.7.2010, p. 40 | T, C, R and S |
| 7 | Lighting, light-signalling devices and their light sources Lighting installation | Supplement 16 to the 02 series of amendments | OJ L 148, 12.6.2010, p. 1 | T, C, R and S |
| 8 | Lighting installation | Incorporating all valid text up to 05 series of amendments Corrigendum 1 to Revision 4 of the Regulation | OJ L 177, 10.7.2010, p. 71 | T and C |
| 10 | Electromagnetic compatibility | 04 series of amendments Corrigendum 1 to the Revision 4 Supplement 1 to the 04 series of amendments | OJ L 254, 20.9.2012, p. 1 | T and C |
| 18 | Devices to prevent unauthorised use | Supplement 2 to the 03 series of amendments | OJ L 120, 13.5.2010, p. 29 | T and C |
| 19 | Lighting, light-signalling devices and their light sources | Supplement 2 to the 03 series of amendments | OJ L 177, 10.7.2010, p. 113 | T and C |
| 20 | Lighting installation | Incorporating all valid text up to 03 series of amendments | OJ L 177, 10.7.2010, p. 170 | T and C |
| 21 | Interior fittings – doors | Supplement 3 to the 01 series of amendments | OJ L 188, 16.7.2008, p. 32 | T and C |
| 23 | Lighting, light signalling devices and their light sources | Supplement 17 to the original version of the Regulation | OJ L 4, 7.1.2012, p. 18 | T, C, R and S |
| 25 | Head restraints | 04 series of amendments Corrigendum 2 to Revision 1 of the Regulation | OJ L 215, 14.8.2010, p. 1 | T and C |
| 28 | Audible warning devices | Supplement 3 to the original version of the Regulation | OJ L 323, 6.12.2011, p. 33 | T and C |
| 30 | Tyres | Supplement 15 to the 02 series of amendments Supplement 16 to the 02 series of amendments | T, R and S | |
| 31 | Lighting, light-signalling devices and their light sources | Supplement 7 to the 02 series of amendments | OJ L 185, 17.7.2010, p. 15 | T and C |
| 37 | Lighting, light-signalling devices and their light sources | Supplement 34 to the 03 series of amendments | OJ L 297, 13.11.2010, p. 1 | T, C and R |
| 38 | Lighting, light-signalling devices and their light sources | Supplement 15 to the original version of the Regulation Corrigendum 1 to Supplement 12 Amendments to Regulation 38 incorporating Supplement 15 to the original version of the Regulation | T and C | |
| 43 | Glazing | Supplement 2 to the 01 series of amendments | OJ L 42, 12.02.2014, p. 1 | T and C |
| 46 | Rear view mirrors | Supplement 4 to the 02 series of amendments Corrigendum 1 to supplement 4 | OJ L 177, 10.7.2010, p. 211 | T and C |
| 48 | Lighting installation | Supplement 6 to the 04 series of amendments 05 series of amendments | OJ L 323, 6.12.2011, p. 46 | T, C, R and S |
| 54 | Tyres | Supplement 16 to the original version of the Regulation Supplement 17 to the original version of the Regulation | T, R and S | |
| 55 | Mechanical couplings | Supplement 1 to the 01 series of amendments | OJ L 227, 28.8.2010, p. 1 | T, C, R and S |
| 62 | Devices to prevent unauthorised use | Supplement 2 to the original version of the Regulation | OJ L 89, 27.3.2013, p. 37 | T and C |
| 69 | Lighting, light-signalling devices and their light sources Lighting installation | Supplement 5 to the 01 series of amendments | OJ L 200, 31.7.2010, p. 1 | T and C T, C, R and S |
| 73 | Lateral protection | 01 series of amendments | OJ L 122, 8.5.2012, p. 1 | R3b and R4B |
| 75 | Tyres | Supplement 13 to the Regulation in its original form | OJ L 84, 30.3.2011, p. 46 | T, R and S |
| 77 | Lighting installation | Supplement 14 to the original version of the Regulation | OJ L 4, 7.1.2012, p. 21 | T, C, R and S |
| 79 | Steering for fast tractors | Supplement 3 to the 01 series of amendments | OJ L 137, 27.5.2008, p. 25 | Tb and Cb |
| 81 | Rear view mirrors | Supplement 2 to the original version of the Regulation | OJ L 185, 13.7.2012, p. 1 | T and C with straddle seat and handlebar |
| 87 | Lighting, light-signalling devices and their light sources | Supplement 14 to the original version of the Regulation Correction 1 to Revision 2 Supplement 15 to the original version of the Regulation | T and C | |
| 89 | Maximum design speed, speed governors and speed limitation devices | Supplement 1 to the original version of the Regulation | OJ L 158, 19.6.2007, p. 1 | T and C |
| 91 | Lighting, light-signalling devices and their light sources | Supplement 11 to the original version of the Regulation Supplement 12 to the original version of the Regulation Supplement 13 to the original version of the Regulation | R and S | |
| 98 | Lighting, light-signalling devices and their light sources | Supplement 4 to the 01 series of amendments | OJ L 176, 14.6.2014, p. 64 | T and C |
| 99 | Lighting, light-signalling devices and their light sources | Supplement 5 to the original version of the Regulation | OJ L 164, 30.6.2010, p. 151 | T and C |
| 104 | Lighting installation | Amendments incorporating all valid text up to: Supplement 7 to the original version of the Regulation | OJ L 75, 14.3.2014, p. 29 | T, C, R and S |
| 106 | Tyres | Supplement 8 to the original version of the Regulation | OJ L 257, 30.9.2010, p. 231 | T, R and S |
| 112 | Lighting, light-signalling devices and their light sources | Supplement 12 to the original version of the Regulation | OJ L 230, 31.8.2010, p. 264 | T and C |
| 113 | Lighting, light-signalling devices and their light sources | Amendments incorporating all valid text up to Supplement 3 to the 01 series of amendments to the Regulation | OJ L 176, 14.6.2014, p. 128 | T and C |
| 117 | Tyres | 02 series of amendments Corrigendum 1 to the 02 series of amendments Corrigendum 2 to the 02 series of amendments Corrigendum 3 to the 02 series of amendments | OJ L 307, 23.11.2011, p. 3 | T, R and S |
| 119 | Lighting, light-signalling devices and their light sources | Amendments incorporating all valid text up to Supplement 3 to the 01 series of amendments | OJ L 89, 25.3.2014, p. 101 | T and C |
| 122 | Heating systems | Corrigendum 2 to the original version of the Regulation Supplement 1 to the original version of the Regulation | OJ L 164, 30.6.2010, p. 231 | T and C |
| 123 | Adaptive front lighting systems | Incorporating all valid text up to Supplement 4 to the original version of the Regulation | OJ L 222, 24.8.2010, p. 1 | T and C |
| 128 | Light emitting diode (LED) light sources | Incorporating all valid text up to Supplement 2 to the original version of the Regulation | OJ L 162, 29.5.2014, p. 43 | T, C and R |
F3The transitional provisions of the UNECE regulations listed in this table apply, except where specific alternative dates are provided for in this Regulation. Compliance with prescriptions in accordance with subsequent amendments to those listed in this table shall also be accepted.