Division 4.1.2.2 Mass(es) and tyre(s)F1
United Kingdom
| According to the tyre specification. | |||||||||
| Load transmitted to the reference centre of the coupling under static conditions, irrespective to the coupling device; if the maximum permissible vertical load on the coupling point depending on the coupling is indicated in this table, expand the table at the right side and indicate the identification of the coupling device in the header of the column; for R- or S-category vehicles this column(s) concerns the rear coupling devices if there is such a device. | |||||||||
| Value to be provided only if the maximum permissible vertical load on the coupling point is lower than indicated in entries 38.3 and 38.4 | |||||||||
| Tyre combi-nation No | Axle No | Tyre dimension incl load capacity index & speed category symbol | Rolling radius ( 1 ) [mm] | Tyre Load rating per tyre [kg] | Maximum permissible mass per axle [kg] f1 | Maximum permissible mass of the vehicle [kg] | Maximum permissible vertical load on the coupling point [kg] f2 f3 | Track width [mm] | |
|---|---|---|---|---|---|---|---|---|---|
| Minimum | Maximum | ||||||||
| 1 | 1 | … | … | … | … | … | … | … | |
| 2 | … | … | … | … | … | … | … | ||
| … | … | … | … | … | … | … | … | ||
| 2 | 1 | … | … | … | … | … | … | … | |
| 2 | … | … | … | … | … | … | … | ||
| … | … | … | … | … | … | … | … | ||
| … | 1 | … | … | … | … | … | … | … | |
| 2 | … | … | … | … | … | … | … | ||
| … | … | … | … | … | … | … | … | ||
Annotations
Textual amendments
Footnotes
- f1
-
According to the tyre specification.
- f2
-
Load transmitted to the reference centre of the coupling under static conditions, irrespective to the coupling device; if the maximum permissible vertical load on the coupling point depending on the coupling is indicated in this table, expand the table at the right side and indicate the identification of the coupling device in the header of the column; for R- or S-category vehicles this column(s) concerns the rear coupling devices if there is such a device.
- f3
-
Value to be provided only if the maximum permissible vertical load on the coupling point is lower than indicated in entries 38.3 and 38.4