Commission Implementing Regulation (EU) 2015/504 of 11 March 2015 implementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles (Text with EEA relevance)
EU Regulation 2015/504 · Adopted 11 March 2015 · Extends to United Kingdom
Commission Implementing Regulation (EU) 2015/504
of 11 March 2015
implementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 167/2013 of the European Parliament and of the Council of 5 February 2013 on the approval and market surveillance of agricultural or forestry vehiclesf1, and in particular Article 22(4), Article 24(4), Article 25(2), (3), and (6), Article 27(1), Article 33(2), Article 34(3), Article 35(4), Article 45(2), Article 46(3) and Article 53(8) thereof,
Whereas:
(1)
This Regulation sets out the detailed administrative requirements regarding the templates for the information folder and for the information document; the template for the certificate on access to vehicle on-board diagnostics and on access to repair and maintenance information; the templates for the certificate of conformity; the models for the manufacturer's statutory plate and the models for the EU type-approval mark; the templates for the EU type-approval certificate and the template for the list of applicable requirements or acts appended to the EU type-approval certificate; the numbering system of EU type-approval certificates; the template for the test results sheet appended to the EU type-approval certificate; the general requirements for the format of test reports; the list of parts and equipment that may pose a serious risk to the correct functioning of essential systems; all aspects related to the procedure of authorisation for placing on the market and entry into service of parts or equipment that may pose a serious risk to the correct functioning of essential systems as well as the template for the certificate for placing on the market and entry into service of parts or equipment that may pose a serious risk to the correct functioning of essential systems; the numbering system of certificates for placing on the market and entry into service of parts or equipment that may pose a serious risk to the correct functioning of essential systems.
(2)
As opposed to Directive 2003/37/EC of the European Parliament and of the Councilf2, Regulation (EU) No 167/2013 provides for a complete set of requirements in order to apply for EU whole-vehicle type-approval for all categories of agricultural and forestry vehicles. The administrative templates to be used in the EU type-approval procedures should be provided.
(3)
New technologies have been introduced in vehicles since the templates used in type-approval procedures were laid down in Directive 2003/37/EC of the European Parliament and of the Council. The templates used in the EU type-approval procedures should be adapted as a result.
(4)
To indicate which procedure has been chosen by the manufacturer when applying for type-approval, a new template for an ‘information folder sheet’ should be introduced.
(5)
In order to ensure reasonable access for independent operators to vehicle repair information, including information relating to on-board diagnostic systems and their interaction with other vehicle systems, manufacturers must provide non-discriminatory access to that information and submit proof of their compliance with that requirement to the approval authorities. A template for a corresponding manufacturer's certificate constituting such proof should be laid down.
(6)
Three templates for a certificate of conformity should be made available, corresponding to the type-approval procedures for complete, completed and incomplete vehicles.
(7)
In order to demonstrate that tractors type-approved with machinery mounted on them and R- and S-category vehicles provide a satisfactory level of safety, part of the documentation comprising the technical file for machinery set out Annex VII to Directive 2006/42/EC of the European Parliament and of the Councilf3 should be included in the information folder. In addition, the EC declaration of conformity of the machinery mounted should be attached to the certificate of conformity of the vehicle.
(8)
In order to simplify the most common EU type-approval certificate, a new template should be developed exclusively for EU whole-vehicle type-approval of a complete vehicle type, while for the other combinations of vehicle types, a different template of the EU whole-vehicle type-approval certificate should be established.
(9)
A single template for the EU type-approval certificate applicable to any type of system should be established, in order to unify and simplify the templates formerly provided for in the separate Union directives for each type of system. For the same reasons, another single template should be established for components and separate technical units.
(10)
The numbering system of EU type-approval certificates, as provided for by Directive 2003/37/EC, should be modified to reflect the new structure of the acts containing the type-approval requirements with which conformity is to be certified.
(11)
To harmonise the presentation of the most relevant information from the testing of compliance with the technical requirements laid down in Regulation (EU) No 167/2013 and the delegated acts adopted pursuant to that Regulation, a minimum set of general requirements for the format of the test reports should be established.
(12)
For the same purpose, technical services should use the templates of the test reports set out in the corresponding international regulation or EN/ISO standard as a guidance for drafting the test reports on technical requirements set out in the delegated acts adopted pursuant to Regulation (EU) No 167/2013 which are based on those laid down in international regulations or EN/ISO standards.
(13)
In order to limit the burden to the manufacturers, the presentation of test reports of certain components and separate technical units issued under Directive 2003/37/EC, Directive 2007/46/EC of the European Parliament and of the Councilf4, Directive 97/68/EC of the European Parliament and of the Councilf5, Regulation (EU) No 595/2009 of the European Parliament and of the Councilf6 or international regulations referred to in Chapter XIII of Regulation (EU) No 167/2013 and the delegated and implementing acts adopted pursuant that Regulation, should be accepted when applying for type-approvals under Regulation (EU) No 167/2013 under the condition that neither the substantive requirements nor the requirements regarding the test procedures have changed since the execution of the test.
(14)
The measures provided for in this Regulation are in accordance with the opinion of the Committee referred to in Article 69(1) of Regulation (EU) No 167/2013,
HAS ADOPTED THIS REGULATION:
Annotations to the whole text
Footnotes
- f1
- f2
-
Directive 2003/37/EC of the European Parliament and of the Council of 26 May 2003 on type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units and repealing Directive 74/150/EEC (OJ L 171, 9.7.2003, p. 1).
- f3
-
Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (OJ L 157, 9.6.2006, p. 24).
- f4
-
Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (OJ L 263, 9.10.2007, p. 1).
- f5
-
Directive 97/68/EC of the European Parliament and of the Council of 16 December 1997 on the approximation of the laws of the Member States relating to measures against the emission of gaseous and particulate pollutants from internal combustion engines to be installed in non-road mobile machinery (OJ L 59, 27.2.1998, p. 1).
- f6
-
Regulation (EC) No 595/2009 of the European Parliament and of the Council of 18 June 2009 on type-approval of motor vehicles and engines with respect to emissions from heavy duty vehicles (Euro VI) and on access to vehicle repair and maintenance information and amending Regulation (EC) No 715/2007 and Directive 2007/46/EC and repealing Directives 80/1269/EEC, 2005/55/EC and 2005/78/EC (OJ L 188, 18.7.2009, p. 1).
Contents
- 1Subject matter
- 2Template for the information document and for the information folder
- 3Template for the manufacturer's certificate on access to vehicle on-board diagnostics (OBD) and to vehicle repair and maintenance information
- 4Templates for the certificate of conformity
- 5Models for the statutory plate and EU type-approval mark
- 6Templates for the EU type-approval certificate
- 7Numbering system of EU type-approval certificates
- 8Template for the test results sheet
- 9Format of test reports
- 10List of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- 11Template for the certificate for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- 12Numbering system of certificates for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- 12aTransitional provisions in respect of engines
- 13Entry into force and application
- Signature
- Annex ITemplate for the information document and for the information folder
- INFORMATION FOLDER
- General requirements
- 1.1Division 1.1
- 1.2Division 1.2
- 1.3Division 1.3
- 1.4Division 1.4
- Template of the information folder sheet.
- on the type-approval procedure chosen in accordance with Article 20(1) of Regulation (EU) No 167/2013 of the European Parliament and of the Council
- Information folder sheet
- 1.1Division 1.1
- 1.2Division 1.2
- 1.2.1Division 1.2.1
- 1.2.2Division 1.2.2
- 1.2.3Division 1.2.3
- 1.2.4Division 1.2.4
- 1.3Division 1.3
- 2.1Division 2.1
- 2.2Division 2.2
- 2.2.1Division 2.2.1
- 2.5.2Division 2.5.2 Repealed
- Virtual and/or self-testing (1)
- 2.8.1Division 2.8.1
- 2.8.2Division 2.8.2
- Explanatory notes relating to the information folder sheet
- (1)Division (1)
- (2)Division (2)
- (3)Division (3)
- (4)Division (4)
- (5)Division (5)
- INFORMATION DOCUMENT
- GENERAL REQUIREMENTS
- 1.1Division 1.1
- 1.2Division 1.2
- TYPE-APPROVAL OF VEHICLES
- 2.1Division 2.1
- 2.2Division 2.2
- 2.2.1Division 2.2.1
- 2.2.2Division 2.2.2
- 2.2.3Division 2.2.3
- Type-, variant- and version designations
- 2.3.1Division 2.3.1
- 2.3.2Division 2.3.2
- 2.3.3Division 2.3.3
- 2.3.4Division 2.3.4
- 2.3.5Division 2.3.5
- Number of characters for the TVV
- 2.3.6.1The number of characters shall not exceed:
- 2.3.6.2Division 2.3.6.2
- 2.3.6.3When the TVV is used as a whole, a space shall be left between the type, the variant and the version.
- TYPE-APPROVAL OF SYSTEMS, COMPONENTS AND SEPARATE TECHNICAL UNITS
- 3.1Division 3.1
- TYPE-APPROVAL NUMBERS OR TEST REPORTS NUMBERS OF THE APPLICABLE SUBJECTS
- 4.1Division 4.1
- 4.2Division 4.2
- INFORMATION DOCUMENT DATA ENTRIES
- GENERAL INFORMATION
- GENERAL INFORMATION CONCERNING VEHICLES
- 1.1Division 1.1
- 1.2Division 1.2
- 1.2.1Division 1.2.1
- 1.2.2Division 1.2.2
- 1.2.3Division 1.2.3
- 1.2.4Division 1.2.4
- 1.3Division 1.3
- 1.4Division 1.4
- 1.4.1Division 1.4.1
- 1.4.2Division 1.4.2
- Manufacturer's statutory plate(s)
- 1.5.1Division 1.5.1
- 1.5.2Division 1.5.2
- 1.5.3Division 1.5.3
- Vehicle identification number
- 1.6.1Division 1.6.1
- 1.6.2Division 1.6.2
- 1.6.1.1Division 1.6.1.1 Repealed
- 1.6.3Division 1.6.3
- GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 2.1Division 2.1
- 2.2Division 2.2
- 2.2.1Division 2.2.1
- 2.2.2Division 2.2.2
- 2.2.3Division 2.2.3
- 2.2.4Division 2.2.4
- 2.3Division 2.3
- 2.3.1Division 2.3.1
- 2.3.2Division 2.3.2
- 2.4Division 2.4
- 2.4.1Division 2.4.1
- 2.4.2Division 2.4.2
- 2.4.3Division 2.4.3
- 2.4.4Division 2.4.4
- 2.4.5Division 2.4.5
- Additional general information for engines Repealed
- 2.5.1Division 2.5.1 Repealed
- 2.5.2Division 2.5.2 Repealed
- 2.5.3Division 2.5.3 Repealed
- Additional marks for engines Repealed
- 2.5.4.1Division 2.5.4.1 Repealed
- 2.5.4.2Division 2.5.4.2 Repealed
- GENERAL CONSTRUCTION CHARACTERISTICS
- 3.1Division 3.1
- 3.2Division 3.2
- 3.3Division 3.3
- 3.3.1Division 3.3.1
- 3.3.2Division 3.3.2
- 3.3.3Division 3.3.3
- 3.3.4Division 3.3.4
- 3.3.5Division 3.3.5
- For C-category vehicles
- 3.4.1Division 3.4.1
- 3.4.2Division 3.4.2
- 3.4.3Division 3.4.3
- Steering for C-category vehicles
- 3.4.4.1Division 3.4.4.1
- 3.4.4.2Division 3.4.4.2
- 3.4.4.3Division 3.4.4.3
- 3.4.4.4Division 3.4.4.4
- 3.4.5Division 3.4.5
- Chassis
- 3.5.1Division 3.5.1
- 3.5.2Division 3.5.2
- 3.5.3Division 3.5.3
- 3.6Division 3.6
- 3.7Division 3.7
- 3.8Division 3.8
- 3.9Division 3.9
- 3.10Division 3.10
- 3.11Division 3.11
- 3.12Division 3.12
- 4MASSES AND DIMENSIONS
- Range of vehicle mass (overall)
- Unladen mass
- 4.1.1.1Division 4.1.1.1
- Maximum mass(es), as declared by the manufacturer
- 4.1.2.1Division 4.1.2.1
- 4.1.2.1.1Division 4.1.2.1.1
- 4.1.2.1.2Division 4.1.2.1.2
- 4.1.2.1.3Division 4.1.2.1.3
- 4.1.2.2Mass(es) and tyre(s)
- 4.1.2.3Mass(es) and crawler undercarriage
- 4.1.2.4Division 4.1.2.4 Repealed
- 4.1.3Division 4.1.3
- 4.1.4Division 4.1.4
- 4.1.5Division 4.1.5 Repealed
- 4.1.5.1Division 4.1.5.1 Repealed
- 4.1.5.2Division 4.1.5.2 Repealed
- 4.1.5.3Division 4.1.5.3 Repealed
- Range of vehicle dimensions (overall)
- For incomplete vehicles
- Length (31)
- 4.2.1.1.1Division 4.2.1.1.1
- 4.2.1.1.2Division 4.2.1.1.2
- Width (32)
- 4.2.1.2.1Division 4.2.1.2.1
- 4.2.1.2.2Division 4.2.1.2.2
- 4.2.1.3Division 4.2.1.3
- 4.2.1.3.1Division 4.2.1.3.1
- 4.2.1.3.2Division 4.2.1.3.2
- 4.2.1.4Division 4.2.1.4
- 4.2.1.4.1Division 4.2.1.4.1
- 4.2.1.5Division 4.2.1.5
- 4.2.1.5.1Division 4.2.1.5.1
- 4.2.1.5.2Division 4.2.1.5.2
- 4.2.1.6Division 4.2.1.6
- 4.2.1.6.1Division 4.2.1.6.1
- 4.2.1.6.2Division 4.2.1.6.2
- 4.2.1.6.3Division 4.2.1.6.3
- 4.2.1.7Division 4.2.1.7
- 4.2.1.7.1Division 4.2.1.7.1
- For complete/completed (4) vehicles
- 4.2.2.1Division 4.2.2.1
- Length for on-road use (31)
- 4.2.2.1.1.1Division 4.2.2.1.1.1
- 4.2.2.1.1.2Division 4.2.2.1.1.2
- Width for on-road use (32)
- 4.2.2.1.2.1Division 4.2.2.1.2.1
- 4.2.2.1.2.2Division 4.2.2.1.2.2
- Height for on-road use (33) (47)
- 4.2.2.1.3.1Division 4.2.2.1.3.1
- 4.2.2.1.3.2Division 4.2.2.1.3.2
- Forward overhang (34) (48)
- 4.2.2.2.1Division 4.2.2.2.1
- 4.2.2.2.2Division 4.2.2.2.2
- Rear overhang (35)
- 4.2.2.3.1Division 4.2.2.3.1
- 4.2.2.3.2Division 4.2.2.3.2
- Ground clearance (36)
- 4.2.2.4.1Division 4.2.2.4.1
- 4.2.2.4.2Division 4.2.2.4.2
- 4.2.2.5Division 4.2.2.5
- 4.2.2.6Division 4.2.2.6
- 4.2.2.7Division 4.2.2.7
- 4.2.2.8Division 4.2.2.8
- 4.2.2.9Division 4.2.2.9
- 4.2.2.9.1Division 4.2.2.9.1
- 4.2.2.9.1.1Division 4.2.2.9.1.1
- 4.2.2.9.1.2Division 4.2.2.9.1.2
- GENERAL POWERTRAIN CHARACTERISTICS
- Maximum vehicle speed
- Forward maximum vehicle speed
- 5.1.1.1Division 5.1.1.1
- 5.1.1.2Division 5.1.1.2
- 5.1.1.3Division 5.1.1.3
- Rearward maximum vehicle speed (54)
- 5.1.2.1Division 5.1.2.1
- 5.1.2.2Division 5.1.2.2 Repealed
- 5.2Division 5.2 Repealed
- 5.3Division 5.3 Repealed
- 5.4Division 5.4 Repealed
- 5.5Division 5.5 Repealed
- 5.6Division 5.6
- INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE
- ESSENTIAL CHARACTERISTICS OF THE ENGINE
- 6.1.7Division 6.1.7
- 6.2.1Division 6.2.1
- 6.2.2Division 6.2.2
- 6.2.3.1Division 6.2.3.1
- Fuel
- 6.2.8.1Division 6.2.8.1
- 6.2.8.3Division 6.2.8.3
- 6.3.2.1Division 6.3.2.1
- 6.3.2.1.2Division 6.3.2.1.2
- 6.3.2.2Division 6.3.2.2
- 6.3.2.2.2Division 6.3.2.2.2
- 6.3.6.4Division 6.3.6.4
- ENERGY STORAGE DEVICE(S) ( 11 )
- 9.1Division 9.1
- 9.2Division 9.2
- 9.3Division 9.3
- 9.4Division 9.4
- 9.4.1Division 9.4.1
- 9.4.2Division 9.4.2
- 9.4.3Division 9.4.3
- 9.4.3.1Division 9.4.3.1
- 9.4.3.1.1Division 9.4.3.1.1
- 9.5Division 9.5
- EXTERNAL SOUND LEVEL
- External sound level declared by the manufacturer
- 10.1.1Division 10.1.1
- 10.1.2Division 10.1.2
- 10.1.3Division 10.1.3
- 10.2Division 10.2
- Air-intake system
- 10.3.1Division 10.3.1
- Air filter
- 10.3.2.1Division 10.3.2.1
- 10.3.2.2Division 10.3.2.2
- 10.3.2.3Division 10.3.2.3
- Intake silencer
- 10.3.3.1Division 10.3.3.1
- 10.3.3.2Division 10.3.3.2
- 10.3.3.3Division 10.3.3.3
- Exhaust system
- 10.4.1Division 10.4.1
- 10.4.2Division 10.4.2
- 10.4.3Division 10.4.3
- 10.4.4Division 10.4.4
- 10.4.4.1Division 10.4.4.1
- 10.4.5Division 10.4.5
- 10.4.6Division 10.4.6
- 10.4.7Division 10.4.7
- 10.5Division 10.5
- DRIVE-TRAIN AND CONTROL ( 13 )
- 11.1Division 11.1
- Transmission
- 11.2.1Division 11.2.1
- 11.2.2Division 11.2.2
- 11.2.3Division 11.2.3
- 11.2.4Division 11.2.4
- 11.2.5Division 11.2.5
- 11.2.6Division 11.2.6
- 11.2.7Division 11.2.7
- 11.2.8Division 11.2.8
- Clutch (if any)
- 11.3.1Division 11.3.1
- 11.3.2Division 11.3.2
- 11.4Gear ratios
- Differential lock
- 11.5.1Division 11.5.1
- INFORMATION ON FUNCTIONAL SAFETY
- PROPULSION AND/OR DRIVE-TRAIN OUTPUT GOVERNORS
- 12.1Division 12.1
- 12.2Division 12.2
- 12.2.1Division 12.2.1
- 12.2.2Division 12.2.2
- 12.3Division 12.3
- 12.3.1Division 12.3.1
- 12.3.2Division 12.3.2
- 12.4Division 12.4
- 12.5Division 12.5
- STEERING
- 13.1Division 13.1
- 13.2Division 13.2
- Transmission and control of steering
- 13.3.1Division 13.3.1
- 13.3.2Division 13.3.2
- 13.3.2.1Division 13.3.2.1
- 13.3.3Division 13.3.3
- 13.3.3.1Division 13.3.3.1
- 13.3.4Division 13.3.4
- 13.3.5Division 13.3.5
- 13.3.6Division 13.3.6
- 13.3.7Division 13.3.7
- Maximum turning angle of the wheels (if fitted)
- 13.4.1Division 13.4.1
- 13.4.2Division 13.4.2
- Minimum turning circle (without braking) (42)
- 13.5.1Division 13.5.1
- 13.5.2Division 13.5.2
- 13.5.3Division 13.5.3
- 13.5.3.1Division 13.5.3.1
- Steering for fast (‘b’ speed index) T-category vehicles
- 13.6.1Division 13.6.1
- 13.6.2Division 13.6.2
- 13.6.3Division 13.6.3
- Complex electronic control systems that affect the steering function
- 13.7.1Division 13.7.1
- SPEEDOMETER, ODOMETER, TACHOMETER AND HOUR METER
- Speedometer
- 14.1.1Division 14.1.1
- 14.1.2Division 14.1.2
- 14.1.3Division 14.1.3
- 14.1.4Division 14.1.4
- 14.1.5Division 14.1.5
- 14.1.6Division 14.1.6
- 14.1.7Division 14.1.7
- 14.1.8Division 14.1.8
- Odometer
- 14.2.1Division 14.2.1
- 14.2.2Division 14.2.2
- Tachometer
- 14.3.1Division 14.3.1
- 14.3.2Division 14.3.2
- Hour meter
- 14.4.1Division 14.4.1
- 14.4.2Division 14.4.2
- FIELD OF VISION
- 15.1Division 15.1
- 15.2Division 15.2
- 15.3Division 15.3
- WINDSCREEN WIPERS AND WASHERS AND DEFROSTING AND DEMISTING
- Windscreen wipers
- 16.1.1Division 16.1.1
- 16.1.2Division 16.1.2
- Windscreen washer
- 16.2.1Division 16.2.1
- 16.2.2Division 16.2.2
- Defrosting and demisting
- 16.3.1Division 16.3.1
- 16.3.2Division 16.3.2
- GLAZING
- 17.1Division 17.1
- 17.2Division 17.2
- 17.2.1Division 17.2.1
- 17.2.2Division 17.2.2
- Windscreen(s)
- 17.2.3.1Division 17.2.3.1
- 17.2.3.2Division 17.2.3.2
- 17.2.3.3Division 17.2.3.3
- 17.2.3.4Division 17.2.3.4
- 17.2.3.5Division 17.2.3.5
- 17.2.3.6Division 17.2.3.6
- Window(s)
- 17.2.4.1Division 17.2.4.1
- 17.2.4.2Division 17.2.4.2
- 17.2.4.3Division 17.2.4.3
- Opening roof glazing
- 17.2.5.1Division 17.2.5.1
- 17.2.5.2Division 17.2.5.2
- 17.2.5.3Division 17.2.5.3
- Other glass panes
- 17.2.6.1Division 17.2.6.1
- 17.2.6.2Division 17.2.6.2
- 17.2.6.3Division 17.2.6.3
- REAR-VIEW MIRRORS
- 18.1Division 18.1
- 18.2Division 18.2
- 1.8.3Division 1.8.3
- 18.4Division 18.4
- 18.5Division 18.5
- 18.6Division 18.6
- 18.7Division 18.7
- 18.8Division 18.8
- Field of vision for rear view mirror(s) of class II
- 18.9.1Division 18.9.1
- 18.9.2Division 18.9.2
- DEVICES FOR INDIRECT VISION OTHER THAN MIRRORS (OPTIONAL)
- 19.1Division 19.1
- 19.2Division 19.2
- 19.3Division 19.3
- 19.4Division 19.4
- DRIVER INFORMATION SYSTEMS
- 20.1Division 20.1
- INSTALLATION OF LIGHTING, LIGHT-SIGNALLING DEVICES, INCLUDING AUTOMATIC SWITCHING OF LIGHTING
- 21.1Division 21.1
- 21.2Division 21.2
- 21.3Division 21.3
- 21.4Division 21.4
- 21.4.1Division 21.4.1
- 21.4.2Division 21.4.2
- 21.4.3Division 21.4.3
- 21.4.4Division 21.4.4
- 21.5Division 21.5
- 21.5.1Division 21.5.1
- 21.5.2Division 21.5.2
- 21.5.3Division 21.5.3
- 21.6Division 21.6
- 21.7Division 21.7
- VEHICLE OCCUPANT PROTECTION, INCLUDING INTERIOR FITTINGS AND OTHER WEATHER PROTECTION ARRANGEMENTS
- Bodywork
- 22.1.1Division 22.1.1
- Burning rate of cab material
- 22.2.1Division 22.2.1
- Interior protection for occupants
- 22.3.1Division 22.3.1
- 22.3.2Division 22.3.2
- Head restraint(s)
- 22.4.1Division 22.4.1
- 22.4.2Division 22.4.2
- 22.4.3Division 22.4.3
- 22.4.4Division 22.4.4
- 22.4.5Division 22.4.5
- 22.4.5.1Division 22.4.5.1
- 22.4.5.2Division 22.4.5.2
- Foot rests
- 22.5.1Division 22.5.1
- Other weather protection arrangements
- 22.6.1Division 22.6.1
- 22.6.2Division 22.6.2
- VEHICLE EXTERIOR AND ACCESSORIES
- 23.1Division 23.1
- 23.2Division 23.2
- 23.3Division 23.3
- ELECTRO-MAGNETIC COMPATIBILITY (EMC)
- 24.1Division 24.1
- 24.2Division 24.2
- 24.3Division 24.3
- 24.4Division 24.4
- 24.4.1Division 24.4.1
- 24.4.2Division 24.4.2
- 24.4.3Division 24.4.3
- 24.4.4Division 24.4.4
- AUDIBLE WARNING DEVICE(S)
- 25.1Division 25.1
- 25.2Division 25.2
- 25.3Division 25.3
- 25.4Division 25.4
- 25.5Division 25.5
- 25.5.1Division 25.5.1
- 25.5.2Division 25.5.2
- 25.6Division 25.6
- HEATING SYSTEM AND AIR-CONDITIONING
- 26.1Division 26.1
- 26.2Division 26.2
- 26.3Division 26.3
- Heating system
- 26.4.1Division 26.4.1
- 26.4.2Division 26.4.2
- 26.4.3Division 26.4.3
- 26.4.4Division 26.4.4
- Air-conditioning
- 26.5.1Division 26.5.1
- 26.5.2Division 26.5.2
- DEVICES TO PREVENT UNAUTHORISED USE
- For T- and C-category vehicles
- 27.1.1Division 27.1.1
- 27.1.2Division 27.1.2
- 27.1.3Division 27.1.3
- 27.1.3.1Division 27.1.3.1
- 27.1.3.2Division 27.1.3.2
- For R- and S-category vehicles
- 27.2.1Division 27.2.1
- 27.2.1.1Division 27.2.1.1
- REAR REGISTRATION PLATE(S) SPACE
- 28.1Division 28.1
- 28.1.1Division 28.1.1
- 28.1.2Division 28.1.2
- 28.1.3Division 28.1.3
- 28.1.4Division 28.1.4
- 28.1.5Division 28.1.5
- 28.1.6Division 28.1.6
- BALLAST MASSES
- 29.1Division 29.1
- 29.2Division 29.2
- 29.2.1Division 29.2.1
- 29.3Division 29.3
- 29.3.1Division 29.3.1
- 29.4Division 29.4
- 29.4.1Division 29.4.1
- 29.5Division 29.5
- SAFETY OF ELECTRICAL SYSTEMS
- 30.1Division 30.1
- 30.2Division 30.2
- 30.3Division 30.3
- 30.4Division 30.4
- 30.5Division 30.5
- 30.5.1Division 30.5.1
- 30.6Division 30.6
- Generator
- 30.7.1Division 30.7.1
- 30.7.2Division 30.7.2
- All-electric vehicles
- 30.8.1Division 30.8.1
- Battery isolator
- 30.9.1Division 30.9.1
- FUEL TANK(S)
- 31.1Division 31.1
- 31.2Division 31.2
- 31.3Division 31.3
- Main fuel tank(s)
- 31.4.1Division 31.4.1
- 31.4.2Division 31.4.2
- 31.4.3Division 31.4.3
- 31.4.4Division 31.4.4
- Reserve fuel tank(s)
- 31.5.1Division 31.5.1
- 31.5.2Division 31.5.2
- 31.5.3Division 31.5.3
- 31.5.4Division 31.5.4
- LATERAL AND REAR PROTECTION
- Lateral protection
- 32.1.1Division 32.1.1
- 32.1.2Division 32.1.2
- 32.1.3Division 32.1.3
- 32.1.4Division 32.1.4
- 32.1.5Division 32.1.5
- 32.1.5.1Division 32.1.5.1
- 32.1.5.2Division 32.1.5.2
- 32.1.6Division 32.1.6
- Rear protective structure
- 32.2.1Division 32.2.1
- 32.2.2Division 32.2.2
- 32.2.3Division 32.2.3
- 32.2.4Division 32.2.4
- 32.2.4.1Division 32.2.4.1
- 32.2.4.2Division 32.2.4.2
- LOAD PLATFORM(S)
- Load platform(s) dimensions
- 33.1.1Division 33.1.1
- 33.1.2Division 33.1.2
- 33.1.3Division 33.1.3
- 33.2Division 33.2
- 33.2.1Division 33.2.1
- 33.3Division 33.3
- 33.3.1Division 33.3.1
- Stability of the load platform
- 33.4.1Division 33.4.1
- 33.4.2Division 33.4.2
- FRONT TOWING DEVICE (T-AND C-CATEGORY VEHICLES)
- 34.1Division 34.1
- 34.2Division 34.2
- TYRES
- 35.1Division 35.1
- 35.2Division 35.2
- 35.3Division 35.3
- 35.4Division 35.4
- 35.5Division 35.5
- 35.6Division 35.6
- 35.7Division 35.7
- SPRAY-SUPPRESSION SYSTEM
- Wheel guards
- 36.1.1Division 36.1.1
- 36.1.2Division 36.1.2
- 36.1.3Division 36.1.3
- Other spray-suppression devices
- 36.2.1Division 36.2.1
- 36.2.2Division 36.2.2
- 36.2.3Division 36.2.3
- 37CRAWLER UNDERCARRIAGE
- 37.1Division 37.1
- 37.2Division 37.2
- Metallic tracks
- 37.3.1Division 37.3.1
- 37.3.2Division 37.3.2
- Rubber tracks
- 37.4.1Division 37.4.1
- 37.4.2Division 37.4.2
- MECHANICAL COUPLING
- 38.1Division 38.1
- 38.1.1Division 38.1.1
- 38.1.2Division 38.1.2
- Short technical description of the mechanical coupling specifying the type of construction and the material used
- 38.2.1Division 38.2.1
- 38.2.2Division 38.2.2
- 38.3Rear mechanical coupling
- 38.4Division 38.4
- 38.5Division 38.5
- 38.6Division 38.6
- THREE-POINT LIFTING MECHANISM
- 39.1Division 39.1
- Maximum towable mass ( 16 ): … kg
- ADDITIONAL COUPLING POINTS
- 40.1Division 40.1
- 40.2Division 40.2
- 40.3Division 40.3
- INFORMATION ON BRAKING PERFORMANCE
- SUSPENSION
- 41.1Division 41.1
- 41.2Division 41.2
- 41.3Division 41.3
- 41.4Division 41.4
- 41.5Division 41.5
- 41.5.1Division 41.5.1
- 41.5.2Division 41.5.2
- 41.6Division 41.6
- 41.6.1Division 41.6.1
- 41.6.2Division 41.6.2
- 41.7Division 41.7
- 41.8Division 41.8
- 41.9Division 41.9
- 41.10Division 41.10
- 41.11Division 41.11
- AXLE(S) AND TYRES
- 42.1Division 42.1
- 42.2Division 42.2
- 42.3Division 42.3
- 42.4Division 42.4
- 42.5Division 42.5
- 42.6Division 42.6
- 42.6.1Division 42.6.1
- 42.6.2Division 42.6.2
- 42.7Division 42.7
- 42.8Division 42.8
- 42.8.1Division 42.8.1
- 42.8.2Division 42.8.2
- 42.8.3Division 42.8.3
- BRAKING
- 43.1Division 43.1
- 43.2Division 43.2
- 43.3Division 43.3 Repealed
- Braking system(s)
- 43.4.1Division 43.4.1
- 43.4.2Division 43.4.2
- 43.4.3Division 43.4.3
- 43.4.4Division 43.4.4
- 43.4.5Division 43.4.5
- 43.4.6Division 43.4.6
- 43.4.7Division 43.4.7
- Braking transmission (on towing vehicle)
- 43.5.1Division 43.5.1
- 43.5.2Division 43.5.2
- 43.5.3Division 43.5.3
- Towed vehicle braking control devices (on towing vehicle)
- 43.6.1Division 43.6.1
- 43.6.2Division 43.6.2 Repealed
- 43.6.3Division 43.6.3 Repealed
- 43.6.4Division 43.6.4 Repealed
- 43.6.4.1Division 43.6.4.1 Repealed
- 43.6.4.2Division 43.6.4.2 Repealed
- 43.6.5Division 43.6.5 Repealed
- 43.6.2Division 43.6.2
- 43.6.2.1Division 43.6.2.1
- 43.6.2.1.1Division 43.6.2.1.1
- 43.6.2.1.2Division 43.6.2.1.2
- 43.6.2.2Division 43.6.2.2
- 43.6.2.2.1Division 43.6.2.2.1
- 43.6.2.2.2Division 43.6.2.2.2
- Towed vehicle braking devices (on towed vehicle)
- 43.7.1Division 43.7.1
- 43.7.2Division 43.7.2
- 43.7.2.1Division 43.7.2.1
- 43.7.3Division 43.7.3
- 43.7.3.1Division 43.7.3.1
- 43.7.3.1.1Division 43.7.3.1.1
- 43.7.3.2Division 43.7.3.2
- 43.7.3.2.1Division 43.7.3.2.1
- 43.ATOWED VEHICLE AXLE AND BRAKE INFORMATION DOCUMENT WITH RESPECT TO THE ALTERNATIVE TYPE I AND TYPE III PROCEDURE
- 43.A.1Division 43.A.1
- 43.A.1.1Division 43.A.1.1
- 43.A.2Division 43.A.2
- 43.A.2.1Division 43.A.2.1
- 43.A.2.2Division 43.A.2.2
- 43.A.2.3Division 43.A.2.3
- 43.A.2.4Division 43.A.2.4
- 43.A.2.5Division 43.A.2.5
- 43.A.3Division 43.A.3
- 43.A.3.1Division 43.A.3.1
- 43.A.3.1.1Division 43.A.3.1.1
- 43.A.3.1.2Division 43.A.3.1.2
- 43.A.3.1.3Division 43.A.3.1.3
- 43.A.3.1.3.1Division 43.A.3.1.3.1
- 43.A.3.1.4Division 43.A.3.1.4
- 43.A.3.1.5Division 43.A.3.1.5
- 43.A.3.2Division 43.A.3.2
- 43.A.3.2.1Division 43.A.3.2.1
- 43.A.3.2.2Division 43.A.3.2.2
- 43.A.3.2.3Division 43.A.3.2.3
- 43.A.3.2.4Division 43.A.3.2.4
- 43.A.3.2.5Division 43.A.3.2.5
- 43.A.3.3Division 43.A.3.3
- 43.A.3.3.1Division 43.A.3.3.1
- 43.A.3.3.2Division 43.A.3.3.2
- 43.A.3.3.3Division 43.A.3.3.3
- 43.A.3.3.4Division 43.A.3.3.4
- 43.A.3.4Division 43.A.3.4
- 43.A.3.4.1Division 43.A.3.4.1
- 43.A.3.4.2Division 43.A.3.4.2
- 43.A.3.4.3Division 43.A.3.4.3
- 43.A.3.4.4Division 43.A.3.4.4
- 43.A.3.4.5Division 43.A.3.4.5
- 43.A.3.4.6Division 43.A.3.4.6
- 43.A.3.4.6.1Division 43.A.3.4.6.1
- 43.A.3.5Division 43.A.3.5
- 43.A.3.5.1Division 43.A.3.5.1
- 43.A.3.5.2Division 43.A.3.5.2
- 43.A.3.5.3Division 43.A.3.5.3
- 43.A.3.5.4Division 43.A.3.5.4
- 43.A.3.5.4.1Division 43.A.3.5.4.1
- 43.A.3.5.5Division 43.A.3.5.5
- 43.A.3.5.6Division 43.A.3.5.6
- 43.A.3.5.7Division 43.A.3.5.7
- 43.A.3.5.8Division 43.A.3.5.8
- 43.A.3.5.9Division 43.A.3.5.9
- 43.A.3.5.9.1Division 43.A.3.5.9.1
- 43.A.3.5.10Division 43.A.3.5.10
- 43.A.3.6Division 43.A.3.6
- 43.A.3.6.1Division 43.A.3.6.1
- 43.A.3.6.2Division 43.A.3.6.2
- 43.A.3.6.3Division 43.A.3.6.3
- 43.A.3.6.4Division 43.A.3.6.4
- 43.A.3.6.5Division 43.A.3.6.5
- 43.A.3.6.6Division 43.A.3.6.6
- 43.A.3.6.7Division 43.A.3.6.7
- 43.A.3.6.8Division 43.A.3.6.8
- 43.A.3.6.9Division 43.A.3.6.9
- 43.A.3.6.10Division 43.A.3.6.10
- 43.A.3.7Division 43.A.3.7
- 43.A.3.7.1Division 43.A.3.7.1
- 43.A.3.7.2Division 43.A.3.7.2
- 43.A.3.7.3Division 43.A.3.7.3
- 43.A.3.7.4Division 43.A.3.7.4
- 43.A.3.7.5Division 43.A.3.7.5
- 43.A.3.7.6Division 43.A.3.7.6
- 43.A.3.7.6.1Division 43.A.3.7.6.1
- Figure 2B
- INFORMATION ON VEHICLE CONSTRUCTION
- CONFORMITY OF PRODUCTION
- 44.1Division 44.1
- ACCESS TO VEHICLE ON BOARD DIAGNOSTIC (OBD) AND VEHICLE REPAIR AND MAINTENANCE INFORMATION (45)
- 45.1Division 45.1
- 45.2Division 45.2
- 45.3Division 45.3
- 45.4Division 45.4
- 45.5Division 45.5
- 45.5.1Division 45.5.1
- Reprogramming of control units in accordance with point 2.5 of Appendix 1 to Annex V to Commission Delegated Regulation (EU) No 1322/2014
- 45.6.1Division 45.6.1
- 45.6.1.1Division 45.6.1.1
- 45.6.1.2Division 45.6.1.2
- 45.6.1.3Division 45.6.1.3
- 45.6.1.4Division 45.6.1.4
- 45.6.1.5Division 45.6.1.5
- 45.6.2Division 45.6.2
- 45.6.3Division 45.6.3
- 45.6.3.1Division 45.6.3.1
- 45.6.3.2Division 45.6.3.2
- 45.6.3.3Division 45.6.3.3
- 45.6.3.4Division 45.6.3.4
- Information required for the manufacture of diagnostic tools
- 45.7.1Division 45.7.1
- 45.7.2Division 45.7.2
- 45.7.3Division 45.7.3
- 45.7.4Division 45.7.4
- 45.7.5Division 45.7.5
- Repair and maintenance information of vehicle combinations
- 45.8.1Division 45.8.1
- 45.8.2Division 45.8.2
- 45.8.2.1Division 45.8.2.1
- 45.8.2.2Division 45.8.2.2
- 45.8.2.2.1Division 45.8.2.2.1
- 45.8.2.2.2Division 45.8.2.2.2
- 45.8.2.3Division 45.8.2.3
- 45.8.2.4Division 45.8.2.4
- 45.8.3Division 45.8.3
- 45.8.3.1Division 45.8.3.1
- ROLL-OVER PROTECTIVE STRUCTURE (ROPS)
- 46.1Division 46.1
- ROPS by cab/by frame/by roll bar(s) mounted at front/rear (4)
- 46.2.1Division 46.2.1
- 46.2.2Division 46.2.2
- 46.2.2.1Division 46.2.2.1
- 46.2.2.2Division 46.2.2.2
- 46.2.2.2.1Division 46.2.2.2.1
- 46.2.2.2.2Division 46.2.2.2.2
- 46.2.2.3Division 46.2.2.3
- 46.2.2.4Division 46.2.2.4
- 46.2.2.4.1Division 46.2.2.4.1
- 46.2.2.4.2Division 46.2.2.4.2
- 46.2.2.4.2.1Division 46.2.2.4.2.1
- 46.2.2.4.2.2Division 46.2.2.4.2.2
- 46.3Division 46.3
- 46.4Division 46.4
- 46.4.1Division 46.4.1
- 46.4.2Division 46.4.2
- 46.4.3Division 46.4.3
- 46.4.4Division 46.4.4
- Dimensions (52)
- 46.5.1Division 46.5.1
- 46.5.2Division 46.5.2
- 46.5.3Division 46.5.3
- 46.5.4Division 46.5.4
- 46.5.5Division 46.5.5
- 46.5.6Division 46.5.6
- 46.5.7Division 46.5.7
- 46.5.8Division 46.5.8
- 46.5.8.1Division 46.5.8.1
- 46.5.8.2Division 46.5.8.2
- Details of materials used in the construction of the protective structure and specifications of steels used (53)
- 46.6.1Division 46.6.1
- 46.6.2Division 46.6.2
- 46.6.3Division 46.6.3
- 46.6.4Division 46.6.4
- 46.6.5Division 46.6.5
- 46.6.6Division 46.6.6
- 46.6.7Division 46.6.7
- 46.7Division 46.7
- 46.7.1Division 46.7.1
- 46.7.2Division 46.7.2
- 46.7.3Division 46.7.3
- 46.7.4Division 46.7.4
- 46.7.5Division 46.7.5
- FALLING OBJECT PROTECTIVE STRUCTURES (FOPS)
- T- and C-category vehicles equipped for forestry applications
- 47.1.1Division 47.1.1
- All other T- and C-category vehicles fitted with FOPS
- 47.2.1Division 47.2.1
- 47.2.2Division 47.2.2
- 47.2.2.1Division 47.2.2.1
- 47.2.2.2Division 47.2.2.2
- Dimensions (52)
- 47.2.3.1Division 47.2.3.1
- 47.2.3.2Division 47.2.3.2
- 47.2.3.3Division 47.2.3.3
- 47.2.3.4Division 47.2.3.4
- Details of materials used in the construction of the protective structure and specifications of steels used (53)
- 47.2.4.1Division 47.2.4.1
- 47.2.4.2Division 47.2.4.2
- 47.2.4.3Division 47.2.4.3
- 47.2.4.4Division 47.2.4.4
- 47.2.5Division 47.2.5
- 47.2.6Division 47.2.6
- DRIVER'S EXPOSURE TO NOISE LEVEL
- 48.1Division 48.1
- 48.2Division 48.2
- 48.3Division 48.3
- 48.4Division 48.4
- SEATING POSITIONS (SADDLES AND SEATS)
- 49.1Division 49.1
- 49.2Division 49.2
- 49.3Division 49.3
- 49.3.1Division 49.3.1
- 49.3.2Division 49.3.2
- 49.3.3Division 49.3.3
- 49.3.4Division 49.3.4
- 49.3.5Division 49.3.5
- Driver's seat
- 49.4.1Division 49.4.1
- 49.4.2Division 49.4.2
- 49.4.3Division 49.4.3
- 49.4.3.1Division 49.4.3.1
- 49.4.4Division 49.4.4
- 49.4.5Division 49.4.5
- 49.4.6Division 49.4.6
- 49.4.7Division 49.4.7
- 49.4.7.1Division 49.4.7.1
- Passenger seat(s)
- 49.5.1Division 49.5.1
- 49.5.2Division 49.5.2
- 49.5.3Division 49.5.3
- 49.5.4Division 49.5.4
- 49.5.5Division 49.5.5
- 49.5.6Division 49.5.6
- OPERATING SPACE AND ACCESS TO AND EXIT OF THE VEHICLE INCLUDING DOORS AND WINDOWS
- Operating space
- 50.1.1Division 50.1.1
- 50.1.2Division 50.1.2
- 50.2Division 50.2
- 50.2.1Division 50.2.1
- 50.2.2Division 50.2.2
- 50.2.2.1Division 50.2.2.1
- 50.2.2.2Division 50.2.2.2
- 50.2.2.3Division 50.2.2.3
- 50.2.2.4Division 50.2.2.4
- 50.2.3Division 50.2.3
- 50.2.4Division 50.2.4
- 50.3Division 50.3
- 50.3.1Division 50.3.1
- 50.3.2Division 50.3.2
- 50.3.2.1Division 50.3.2.1
- 50.3.2.2Division 50.3.2.2
- 50.3.2.3Division 50.3.2.3
- 50.3.2.4Division 50.3.2.4
- 50.3.3Division 50.3.3
- Occupant doors, latches and hinges
- 50.4.1Division 50.4.1
- 50.4.2Division 50.4.2
- 50.4.3Division 50.4.3
- 50.4.4Division 50.4.4
- Windows and emergency exit(s)
- 50.5.1Division 50.5.1
- 50.5.2Division 50.5.2
- 50.5.3Division 50.5.3
- 50.5.4Division 50.5.4
- POWER TAKE-OFF(S)
- 51.1Division 51.1
- Main power take-off
- 51.2.1Division 51.2.1
- 51.2.2Division 51.2.2
- 51.2.2.1Division 51.2.2.1
- 51.2.3Optional: Power at the power take-off (PTO) at the rated speed(s) (in accordance with OECD Code 2 ( 57 ) or ISO 789-1:1990 (Agricultural tractors – Test procedures – Part 1: Power tests for power take-off))
- 51.2.4Division 51.2.4
- Secondary power take-off (if any)
- 51.3.1Division 51.3.1
- 51.3.2Division 51.3.2
- 51.3.2.1Division 51.3.2.1
- 51.3.3Division 51.3.3
- 51.3.4Division 51.3.4
- Rear power take-off
- 51.4.1Division 51.4.1
- 51.4.2Division 51.4.2
- Front power take-off
- 51.5.1Division 51.5.1
- PROTECTION OF DRIVE COMPONENTS, EXHAUST SYSTEM, GUARDS AND PROTECTIVE DEVICES
- 52.1Division 52.1
- 52.1.1Division 52.1.1
- 52.1.2Division 52.1.2
- 52.1.3Division 52.1.3
- 52.1.4Division 52.1.4
- 52.1.5Division 52.1.5
- 52.1.6Division 52.1.6
- 52.1.7Division 52.1.7
- 52.1.8Division 52.1.8
- 52.1.9Division 52.1.9
- 52.1.10Division 52.1.10
- 52.1.11Division 52.1.11
- 52.1.12Division 52.1.12
- 52.2Division 52.2
- 52.2.1Division 52.2.1
- 52.2.2Division 52.2.2
- 52.2.3Division 52.2.3
- 52.2.4Division 52.2.4
- 52.3Division 52.3
- 52.4Division 52.4
- 52.5Division 52.5
- 52.6Division 52.6
- SEAT-BELT ANCHORAGES
- 53.1Division 53.1
- 53.2Division 53.2
- 53.3Division 53.3
- 53.4Designation of the types of belts (14) authorised for attachment to the anchorages on the vehicles
- 53.4.1Division 53.4.1
- 53.5Division 53.5
- 53.6Division 53.6
- Alternative to entries 53.2 to 53.6.
- 53.7.1Division 53.7.1
- 53.7.2Division 53.7.2
- 53.7.3Division 53.7.3
- 53.7.4Division 53.7.4
- 53.7.5Division 53.7.5
- 53.7.6Division 53.7.6
- 53.7.7Division 53.7.7
- SAFETY BELTS
- 54.1Division 54.1
- 54.2Division 54.2
- 54.3Division 54.3
- 54.4Division 54.4
- PROTECTION AGAINST PENETRATING OBJECTS (OPS)
- T- and C-category vehicles equipped for forestry applications
- 55.1.1Division 55.1.1
- All other T- and C-category vehicles fitted with OPS
- 55.2.1Division 55.2.1
- OPERATOR'S MANUAL, INFORMATION WARNINGS AND MARKINGS
- Operator's manual
- 56.1.1Division 56.1.1
- 56.1.2Division 56.1.2
- Information, warnings and markings
- 56.2.1Division 56.2.1
- 56.2.2Division 56.2.2
- 56.2.3Division 56.2.3
- 56.2.4Division 56.2.4
- 56.3Division 56.3
- 56.4Division 56.4
- DRIVER-OPERATED CONTROL DEVICES INCLUDING IDENTIFICATION OF CONTROL DEVICES, TELL-TALES AND INDICATORS
- 57.1Division 57.1
- 57.2Division 57.2
- 57.3Division 57.3
- 57.4Division 57.4
- 57.5Division 57.5
- 57.6Division 57.6
- 57.7Division 57.7
- 57.8Division 57.8
- 57.9Division 57.9
- PROTECTION AGAINST HAZARDOUS SUBSTANCES
- 58.1Division 58.1
- 58.2Division 58.2
- 58.3Division 58.3
- FOR T- AND C-CATEGORY VEHICLES, MACHINERY (63) MOUNTED ON THE VEHICLE
- 59.1Division 59.1
- 59.2Division 59.2
- 1Appendix 1
- 2Appendix 2
- 3Appendix 3
- 4Appendix 4
- 5Appendix 5
- 6Appendix 6
- 7Appendix 7
- 8Appendix 8
- 9Appendix 9
- 10Appendix 10
- 11Appendix 11
- 12Appendix 12
- 13Appendix 13
- 14Appendix 14
- 15Appendix 15
- 16Appendix 16
- 17Appendix 17
- 18Appendix 18
- 19Appendix 19
- 20Appendix 20
- 21Appendix 21
- 22Appendix 22
- 23Appendix 23
- 24Appendix 24
- Annex II: Template for the manufacturer's certificate on access to vehicle on-board diagnostics (OBD) and to vehicle repair and maintenance information
- 1Division 1
- 1.1Division 1.1
- 2Division 2
- 2.1Division 2.1
- Manufacturer's certificate on access to vehicle OBD and vehicle repair and maintenance information
- 2.1.1Division 2.1.1
- Addendum 1to
- 1.2Division 1.2
- 1.2.1Division 1.2.1
- 1.2.2Division 1.2.2
- 1.2.3Division 1.2.3
- 1.3Division 1.3
- 2.1Division 2.1
- 2.2Division 2.2
- 2.2.1Division 2.2.1
- 2.2.2Division 2.2.2
- 2.2.3Division 2.2.3
- 2.3Division 2.3
- 2.5.2Division 2.5.2 Repealed
- 2.1.2Division 2.1.2
- Addendum 2to
- 2.1.3Division 2.1.3
- Addendum 3to
- Explanatory notes relating to Annex II
- (1)Division (1)
- (2)Division (2)
- (3)Division (3)
- (4)Division (4)
- (5)Division (5)
- Annex III: Templates for the certificate of conformity
- 1Objectives
- General requirements
- 2.1Division 2.1
- 2.2The certificate of conformity shall consist of two sections:
- 2.3Division 2.3
- 2.4Division 2.4
- 2.5Division 2.5
- Models of section 1 of the certificate of conformity
- 3.1Division 3.1
- 3.2Model B of section 1 of the certificate of conformity (completed vehicles) shall cover vehicles which can also be used on the road without requiring any further approval, and which have previously undergone an additional approval stage.
- 3.3Division 3.3
- 4Models of section 2 of the certificate of conformity
- Paper and features to prevent forgery
- 5.1Division 5.1
- 5.2Division 5.2
- 5.3Division 5.3
- Special provisions
- 6.1Division 6.1
- 1Appendix 1
- Annex IV: Models for the statutory plate and EU type-approval mark
- General requirements for vehicle marking
- 1.1Division 1.1
- Characters
- 1.2.1Division 1.2.1
- 1.2.2Division 1.2.2
- Minimum height of letters and figures.
- 1.3.1Division 1.3.1
- 1.3.1.1Division 1.3.1.1
- 1.3.2Division 1.3.2
- Statutory plate
- 2.1.1Division 2.1.1
- 2.1.2Division 2.1.2
- 3Requirements for the VIN
- Marking requirements for a multi-stage approval
- 4.1Base vehicle identification number
- Additional statutory plate.
- 4.2.1Division 4.2.1
- Marking requirements for components or separate technical units
- 5.1Division 5.1
- 5.1.1Division 5.1.1
- 5.2Division 5.2
- 5.3Division 5.3
- 5.4Specific requirements for marking of engines
- 1Examples of the statutory plate
- 2Appendix 2
- Annex VTemplates for the EU type-approval certificate
- General requirements
- 1.1Division 1.1
- 1.2Division 1.2
- 1.3Division 1.3
- 1.4Division 1.4
- 1.5Division 1.5
- 1.5.1Division 1.5.1
- 1.6Division 1.6
- 1Appendix 1
- 2Appendix 2
- 3Appendix 3
- 4Appendix 4
- 5Appendix 5
- 6Appendix 6
- Annex VI: Numbering system of EU type-approval certificates
- 1Division 1
- 2Division 2
- 2.1Division 2.1
- 2.2Division 2.2
- 2.2.1Division 2.2.1
- 2.2.2Division 2.2.2
- 2.2.3Division 2.2.3
- 2.3Division 2.3
- 2.3.1Division 2.3.1
- 2.3.2Division 2.3.2
- 2.4Division 2.4
- 2.5Division 2.5
- 3Division 3
- 4Lay-out of the type-approval numbers (with fictive sequential numbers and fictive amending Commission Delegated Regulation number (‘RRR/2016’) for explanation purposes)
- Table 6-1Codification for the numbering system of EU type-approval certificates of systems, components and separate technical units
- Annex VII: Template for the test results sheet
- General requirements
- 1.1Division 1.1
- 1.2Division 1.2
- 1Appendix 1
- Annex VIII: Format of test reports
- General requirements for the format of the test reports
- 1.1Division 1.1
- 1.2Division 1.2
- 1.2.1Division 1.2.1
- 1.3Division 1.3
- 1.3.1Division 1.3.1
- 1.4Division 1.4
- 1.5Division 1.5
- 2Requirements for the content of the test reports
- 2.1Division 2.1
- 2.2Division 2.2
- 2.3Division 2.3
- 2.3.1Division 2.3.1
- 2.4Division 2.4
- 2.5Division 2.5
- 2.5.1Division 2.5.1
- 2.6Division 2.6
- 2.7Division 2.7
- 2.8Division 2.8
- 2.8.1Division 2.8.1
- 2.9Division 2.9
- 2.10Division 2.10
- 2.11Division 2.11
- 2.12Division 2.12
- 2.13Division 2.13
- 2.14Division 2.14
- 2.15Division 2.15
- 2.16Division 2.16
- 2.17Division 2.17
- 2.18Division 2.18
- 2.19Division 2.19
- 2.20Division 2.20
- 2.21Division 2.21
- 2.21.1Division 2.21.1
- 2.21.2Division 2.21.2
- Special provisions
- 3.1Division 3.1
- 3.2Division 3.2
- 3.3Division 3.3
- 3.4Division 3.4
- 3.4.1Test report number
- 3.4.1.1Division 3.4.1.1
- 3.4.1.2Division 3.4.1.2
- 3.4.2Test code
- 3.5Test report for engines
- 1Appendix 1
- 2Appendix 2
- 3Appendix 3
- 4Appendix 4
- 5Appendix 5
- Annex IXList of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- Annex X: Template for the certificate for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- General requirements
- 1.1Division 1.1
- 1.2Division 1.2
- 1.3Division 1.3
- 1.4Division 1.4
- 1Appendix 1
- Annex XI: Numbering system of certificates for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- Numbering system
- 1.1Division 1.1
- 1.1.1Division 1.1.1
- 1.1.2Division 1.1.2
- 1.1.3Division 1.1.3
- 1.1.4Division 1.1.4
- 1.1.5Division 1.1.5
- 1.2Division 1.2