Division 5.4 Specific requirements for marking of enginesF1
United Kingdom
Notwithstanding point 5.2, the statutory marking of the engine shall be in accordance with the provisions set out in Annex III to Implementing Regulation (EU) 2017/656, with the following exceptions:
- (a)
for engines type-approved in accordance with Regulation (EU) No 167/2013, the EU type-approval number set out in Table 6-1 of Annex VI shall be stated instead of the EU type-approval number set out in Annex V to Implementing Regulation (EU) 2017/656;
- (b)
for replacement engines type-approved in accordance with Directive 2000/25/EC of the European Parliament and of the Council f1 , the EC type-approval number set out in Appendix 1 to Chapter C of Annex II to Directive 2003/37/EC of the European Parliament and of the Council f2 shall be stated instead of the EC type-approval number issued in accordance with Directive 97/68/EC of the European Parliament and of the Council f3 .
Annotations
Textual amendments
Footnotes
- f1
-
Directive 2000/25/EC of the European Parliament and of the Council of 22 May 2000 on action to be taken against the emission of gaseous and particulate pollutants by engines intended to power agricultural and forestry tractors and amending Council Directive 74/150/EEC ( OJ L 173, 12.7.2000, p. 1 ).
- f2
-
Directive 2003/37/EC of the European Parliament and of the European Council of 26 May 2003 on the type-approval of agricultural or forestry tractors, their trailers and interchangeable towed machinery, together with their systems, components and separate technical units and repealing Directive 74/150/EEC ( OJ L 171, 9.7.2003, p. 1 ).
- f3
-
Directive 97/68/EC of the European Parliament and of the Council of 16 December 1997 on the approximation of the laws of the Member States relating to measures against the emission of gaseous and particulate pollutants from internal combustion engines to be installed in non-road mobile machinery ( OJ L 59, 27.2.1998, p. 1 ).