Appendix 1
United Kingdom
Model of the EU whole-vehicle type-approval certificate for a complete vehicle type
EU TYPE-APPROVAL CERTIFICATE
MODEL A
(to be used for type-approval of a complete vehicle)
EU WHOLE-VEHICLE TYPE-APPROVAL CERTIFICATE
Identification of type-approval authority
Communication concerning:
| of a complete vehicle type |
with regard to Regulation (EU) No 167/2013, as last amended by (Commission Delegated) (1) Regulation (EU) (No) (1) …/… (1) (5) (of the European Parliament and of the Council) (1)
EU type-approval number: …
Reason for extension/refusal/withdrawal (1): …
SECTION I
1.1.
Make (trade name of manufacturer): …
1.2.
Type (2): …
1.2.1
Variant(s) (2): …
1.2.2
Version(s) (2): …
1.2.3.
Commercial name(s) (if available): …
1.3.
Category, subcategory and speed index of vehicle (3): …
1.4.
Company name and address of manufacturer of the complete vehicle: …
1.4.1.
Name(s) and address(es) of assembly plants: …
1.4.2.
Name and address of manufacturer's authorised representative, if any: …
SECTION II
1.
Technical service responsible for carrying out the tests: …
2.
Date of test report: …
3.
Number of test report: …
SECTION III
The undersigned hereby certifies the accuracy of the manufacturer's description in the attached information document of the vehicle type described above, for which one or more representative samples, selected by the EU type-approval authority, have been submitted as prototypes of the vehicle type and that the attached test results apply to the vehicle type.
1.
The complete vehicle type meets/does not meet (1) all relevant requirements as listed in Annex I to Regulation (EU) No 167/2013.
1.1.
Restrictions of validity (1) (6): …
1.2.
Waivers applied (1) (7): …
1.2.1.
Reasons for the waivers (1) (7): …
1.2.2.
Alternative requirements (1) (7): …
2.
The approval is granted/extended/refused/withdrawn (1)
F12.1.
The approval is granted in accordance with Article 35 of Regulation (EU) No 167/2013 and the validity of the approval is thus limited to dd/mm/yyyy ( 6 ).
Place: …
Date: …
Name and signature (or visual representation of an ‘advanced electronic signature’ according to Directive 1999/93/EC of the European Parliament and of the Council, including data for verification):
Attachments:
-
Information package
-
Test results
-
Name(s) and specimen(s) of the signature(s) of the person(s) authorised to sign certificates of conformity and a statement of their position in the company
-
A completed specimen of the certificate of conformity
NB:
—
If this model is used for type-approval of a vehicle as an exemption for new technology or new concept, pursuant to Article 35 of Regulation (EU) No 167/2013, the heading of the certificate shall read ‘EU WHOLE-VEHICLE PROVISIONAL TYPE-APPROVAL CERTIFICATE VALID ONLY ON THE TERRITORY OF … (4)’. The provisional type-approval certificate shall also specify the restrictions that have been imposed as to its validity in accordance with Article 25(4) of Regulation (EU) No 167/2013.
—
If this model is used for vehicle type-approval for a national small series, pursuant to Article 37 of Regulation (EU) No 167/2013, it shall not bear the heading ‘EU VEHICLE TYPE-APPROVAL CERTIFICATE’. The text shall specify the nature of the waivers, the reasons for them and the alternative requirements pursuant to Article 37(2) of Regulation (EU) No 167/2013.
Explanatory notes relating to Appendix 1
(Footnote markers, footnotes and explanatory notes not to be stated on the EU whole-vehicle type-approval certificate):
(1)
Delete where not applicable.
(2)
Indicate the alphanumeric code Type-Variant-Version or ‘TVV’ allocated to each type, variant and version as set out in point 2.3 of Part B of Annex I to this Regulation. For the identification of variant and versions it may be employed the matrix set out in point 2.2 of Part B of Annex I to this Regulation.
(3)
Classified according to Article 4 of Regulation (EU) No 167/2013, the coding shall be indicated, e.g. ‘T4.3a’ for a low-clearance tractor with a maximum design speed below or equal to 40 km/h.
(4)
Indicate the Member State.
(5)
Indicate only the latest amendment in case of an amendment of one or more Articles of Regulation (EU) No 167/2013, according to the amendment applied for the EU type-approval.
(6)
Applicable only for type-approval of a vehicle as an exemption for new technology or new concept, pursuant to Article 35 of Regulation (EU) No 167/2013.
(7)
Applicable only for vehicle type-approval for a national small series, pursuant to Article 37 of Regulation (EU) No 167/2013.