Appendix 2
United Kingdom
Model of the EU whole-vehicle type-approval certificate for an incomplete type, a vehicle type with complete and incomplete variants, a vehicle type with completed and incomplete variants or a completed vehicle type
EU TYPE-APPROVAL CERTIFICATE
MODEL B
(to be used for type-approval of a completed or incomplete vehicle or a vehicle type with complete and incomplete variants or with completed and incomplete variants)
EU WHOLE-VEHICLE TYPE-APPROVAL CERTIFICATE
Stamp of approval authority
Communication concerning:
|
|
with regard to Regulation (EU) No 167/2013, as last amended by (Commission Delegated) (1) Regulation (EU) (No) (1) …/… (1) (8) (of the European Parliament and of the Council) (1)
EU type-approval number (1): …
Reason for extension/refusal/withdrawal (1): …
SECTION I
1.1.
Make (trade name of manufacturer): …
1.2.
Type (2): …
1.2.1
Variant(s) (2): …
1.2.2
Version(s) (2): …
1.2.3.
Commercial name(s) (if available): …
1.3.
Category, subcategory and speed index of vehicle (3): …
1.4.
Company name and address of the manufacturer of the base vehicle (1) (4): …
Company name and address of the manufacturer of the complete variant (1) (4): …
Company name and address of the manufacturer of the completed vehicle/variant (1) (4): …
Company name and address of the manufacturer of the latest built stage of the incomplete vehicle (1) (4): …
Company name(s) and address(es) of the manufacturer(s) of all previous stage(s) (1) (4): …
1.4.1.
Name(s) and address(es) of assembly plant(s): …
1.4.2.
Name and address of the manufacturer's representative (if any): …
SECTION II
1.
Technical service responsible for carrying out the tests: …
2.
Date of test report: …
3.
Number of test report: …
SECTION III
The undersigned hereby certifies the accuracy of the manufacturer's description in the attached information document of the vehicle type described above, for which one or more representative samples, selected by the EU type-approval authority, have been submitted as prototypes of the vehicle type and that the attached test results apply to the vehicle type.
1.
For complete variants
1.1.
The complete variants of the vehicle type meet/do not meet (1) all relevant requirements as listed in Annex I to Regulation (EU) No 167/2013.
2.
For completed vehicles/variants
2.1.
The completed vehicle type/completed variant of the vehicle type meets/does not meet (1) all relevant requirements as listed in Annex I to Regulation (EU) No 167/2013 (4):
2.1.1.
The approval authority has verified that the completed vehicle/variant of the vehicle type meets all applicable technical requirements at the time of granting this type-approval (cf. Article 20(6) of Regulation (EU) No 167/2013).
3.
For incomplete vehicles/variants
3.1.
The incomplete vehicle type/incomplete variants of the vehicle type meets/does not meet (1) the technical requirements of the regulatory acts listed in the table in point 2 of section 2 (4).
4.
The approval is granted/extended/refused/withdrawn (1)
F14.1.
The approval is granted in accordance with Article 35 of Regulation (EU) No 167/2013 and its validity is thus limited to dd/mm/yyyy ( 6 ).
5.
Restrictions of validity (1) (6): …
6.
Waivers applied (1) (7): …
6.1.
Reasons for the waivers (1) (7): …
6.2.
Alternative requirements (1) (7): …
Place: …
Date: …
Name and signature (or visual representation of an ‘advanced electronic signature’ according to Directive 1999/93/EC of the European Parliament and of the Council, including data for verification): …
Attachments:
-
Information package
-
Test results
-
Name(s) and specimen(s) of the signature(s) of the person(s) authorised to sign certificates of conformity and a statement of their position in the company
-
A completed specimen of the certificate of conformity
NB:
—
If this model is used for type-approval of a vehicle as an exemption for new technology or new concept, pursuant to Article 35 of Regulation (EU) No 167/2013, the heading of the certificate shall read ‘EU WHOLE-VEHICLE PROVISIONAL TYPE-APPROVAL CERTIFICATE VALID ONLY ON THE TERRITORY OF … (5)’. The provisional type-approval certificate shall also specify the restrictions that have been imposed as to its validity in accordance with Article 25(4) of Regulation (EU) No 167/2013.
—
If this model is used for vehicle type-approval for a national small series, pursuant to Article 37 of Regulation (EU) No 167/2013, it shall not bear the heading ‘EU VEHICLE TYPE-APPROVAL CERTIFICATE’. The text shall specify the nature of the waivers, the reasons for them and the alternative requirements pursuant to Article 37(2) of Regulation (EU) No 167/2013.
EU WHOLE-VEHICLE TYPE-APPROVAL CERTIFICATE
SECTION 2
This EU type-approval concerns incomplete and completed vehicles, variants or versions.
1.
Previous stage(s) approval(s) for the vehicles.
| Stage | EU type-approval number | Dated | Applicable to (as appropriate) | Variants and versions which are complete or completed (as appropriate) ( 9 ) |
|---|---|---|---|---|
| 1 (base vehicle) | ||||
| 2 |
2.
List of requirements applicable to the approved incomplete vehicle type, variant, taking account of the scope and latest amendment to each of the regulatory acts listed below ( 10 ).
| Item | Subject | Regulatory act reference | As amended by and/or stage of implementation | Applicable to variants |
|---|---|---|---|---|
Explanatory notes relating to Appendix 2
(Footnote markers, footnotes and explanatory notes not to be stated on the EU whole-vehicle type-approval certificate):
(1)
Delete where not applicable.
(2)
Indicate the alphanumeric code Type-Variant-Version or ‘TVV’ allocated to each type, variant and version as set out in point 2.3 of Part B of Annex I to this Regulation. For the identification of variant and versions it may be employed the matrix set out in point 2.2 of Part B of Annex I to this Regulation.
(3)
Classified according to Article 4 of Regulation (EU) No 167/2013, the coding shall be indicated, e.g. ‘T4.3a’ for a low-clearance tractor with a maximum design speed below or equal to 40 km/h.
(4)
See section 2.
(5)
Indicate the Member State.
(6)
Applicable only for type-approval of a vehicle as an exemption for new technology or new concept, pursuant to Article 35 of Regulation (EU) No 167/2013
(7)
Applicable only for vehicle type-approval for a national small series, pursuant to Article 37 of Regulation (EU) No 167/2013
(8)
Indicate only the latest amendment in case of an amendment of one or more Articles of Regulation (EU) No 167/2013, according to the amendment applied for the EU type-approval.
(9)
In the case where the approval includes one or more incomplete variants or versions (as appropriate), list those variants or versions (as appropriate) which are complete or completed.
F2(10)
List only subjects referred to in Annex I to Regulation (EU) No 167/2013 whose approvals have been granted in accordance with Regulation (EU) 2016/1628 or the UNECE regulations referred to in Article 49 of Regulation (EU) No 167/2013 (UNECE approvals), or are based on complete test reports issued on the basis of the OECD standard Codes as an alternative to the test reports drawn up under Regulation (EU) No 167/2013 and the delegated and implementing acts adopted pursuant to that Regulation.
Annotations
Textual amendments
- F1
- F2