Appendix 13
United Kingdom
Model information document relating to EU type-approval of a tyre as a component
A.
GENERAL INFORMATION
2.
GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
2.1.
Make(s) (trade name(s) of manufacturer): …
F12.2.
Type ( 6 ): …
2.2.1.
Commercial name(s) (if available): …
2.2.2.
Type-approval number(s) (49) (if available): …
2.2.3.
Type-approval(s) issued on (date, if available): …
F22.2.4.
For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) ( 19 ): …
2.3.
Company name and address of manufacturer: …
2.3.1.
Name(s) and address(es) of assembly/manufacture plants: …
2.3.2.
Name and address of manufacturer's authorised representative (if any): …
35.
TYRES
35.8.
Tyre size designation: …
35.9.
Type of vehicle(s) for which is intended for: tractor (T- and C-category vehicles)/trailer (R-category vehicles)/interchangeable towed equipment (S-category vehicles) (4)
35.10.
Tyre construction: diagonal (bias-ply)/bias belted/radial for construction applications (4)
35.11.
Photographs and drawing of the mould's sidewall: …
35.12.
Load capacity index and speed category symbol …
35.12.1.
For T- and C-category vehicles: …
35.12.2.
For R-category vehicles: …
35.12.3.
For S-category vehicles: …
35.13.
Rolling resistance in accordance with ISO 28580:2009 (Passenger car, truck and bus tyres — Methods of measuring rolling resistance — Single point test and correlation of measurement results) (where applicable): …
35.14.
Service for which is intended: drive wheel/free rolling wheel/both (4)
35.15.
Tyre designed for use without an inner tube (tubeless): yes/no (4)
35.16.
Inflation pressure for bead seating during tyre mounting less than: … kPa.
Annotations
Textual amendments
- F1
- F2