OpenLegislation

Appendix 12

United Kingdom

Original text. Later amendments are not shown.

Model information document relating to EU type-approval of a lateral and/or rear protective structure as a component/STU

A.

GENERAL INFORMATION

2.

GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1.

Make(s) (trade name(s) of manufacturer): …

F12.2.

Type ( 6 ): …

2.2.1.

Commercial name(s) (if available): …

2.2.2.

Type-approval number(s) (49) (if available): …

2.2.3.

Type-approval(s) issued on (date, if available): …

F22.2.4.

For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) ( 19 ): …

2.3.

Company name and address of manufacturer: …

2.3.1.

Name(s) and address(es) of assembly/manufacture plants: …

2.3.2.

Name and address of manufacturer's authorised representative (if any): …

2.4.

For systems and separate technical units, vehicle(s) for which they are intended for (21):

2.4.1.

Type (17): …

2.4.2.

Variant(s) (17): …

2.4.3.

Version(s) (17): …

2.4.4.

Commercial name(s) (if available): …

2.4.5.

Category, subcategory and speed index of the vehicle (2): …

32.

LATERAL AND REAR PROTECTION

32.1.

Lateral protection

32.1.5.

In the case of lateral protection device(s), full description and/or drawing of such device(s) (including mountings and fittings): …

32.1.5.1.

Materials used: …

32.1.5.2.

Complete details of fittings required and full instructions, including torque requirements, for fitting: …

32.1.6.

Requirements under points 2 and 3 and Parts I, II and III of UNECE Regulation No 73 (OJ L 122, 8.5.2012, p. 1) are met with relevant documentation included in the information document: yes/no (4)

32.2.

Rear protective structure

32.2.4.

In case of a special device, full description and/or drawing of the rear protective structure (including mountings and fittings), or, if approved as separate technical unit, type-approval number: …

32.2.4.1.

Materials used: …

32.2.4.2.

Complete details of fittings required and full instructions, including torque requirements, for fitting: …

Annotations

Textual amendments

F1

Substituted by Commission Implementing Regulation (EU) 2018/986 of 3 April 2018 amending Implementing Regulation (EU) 2015/504 as regards the adaptation of the administrative provisions for the approval and market surveillance of agricultural and forestry vehicles to Stage V emission limits (Text with EEA relevance).

F2

Inserted by Commission Implementing Regulation (EU) 2016/1789 of 7 September 2016 amending Implementing Regulation (EU) 2015/504 with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles (Text with EEA relevance).

Notes on Annex I

Textual amendments

F1

Substituted by Commission Implementing Regulation (EU) 2016/1789 of 7 September 2016 amending Implementing Regulation (EU) 2015/504 with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles (Text with EEA relevance).