Appendix 14
United Kingdom
Model information document relating to EU type-approval of a mechanical coupling as a component/STU
A.
GENERAL INFORMATION
2.
GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
2.1.
Make(s) (trade name(s) of manufacturer): …
F12.2.
Type ( 6 ): …
2.2.1.
Commercial name(s) (if available): …
2.2.2.
Type-approval number(s) (49) (if available): …
2.2.3.
Type-approval(s) issued on (date, if available): …
F22.2.4.
For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) ( 19 ): …
2.3.
Company name and address of manufacturer: …
2.3.1.
Name(s) and address(es) of assembly/manufacture plants: …
2.3.2.
Name and address of manufacturer's authorised representative (if any): …
2.4.
For systems and separate technical units, vehicle(s) for which they are intended for (21):
2.4.1.
Type (17): …
2.4.2.
Variant(s) (17): …
2.4.3.
Version(s) (17): …
2.4.4.
Commercial name(s) (if available): …
2.4.5.
Category, subcategory and speed index of the vehicle (2): …
38.
MECHANICAL COUPLINGS
F338.1.
Photographs and dimensional drawings of the mechanical coupling, its installation on the vehicle and its coupling with the device installed on the towed vehicle: …
38.1.1.
Rear mechanical coupling: yes/no (4)
38.1.2.
Front coupling device (for R- and S-category vehicles): yes/no (4)
38.2.
Short technical description of the mechanical coupling specifying the type of construction and the material used
38.5.
Description of the mechanical coupling:
| Type (according to Appendix 1 of Annex XXXIV to Commission Delegated Regulation (EU) 2015/208): | … |
| Make: | … |
| Manufacturer’s type designation: | … |
| Maximum horizontal load/D-Value ( 4 ) ( 44 ): | … kg/kN ( 4 ) |
| Towable mass (T) ( 4 ) ( 44 ): | … tonnes |
| Maximum permissible vertical load on the coupling point (S) ( 44 ): | … kg |
| Photographs and scale drawings of the coupling device. These drawings shall in particular show the required dimensions in detail as well as the measurements for mounting the device. | |
| Short technical description of the coupling device specifying the type of construction and the material used. | |
| Type of Test | Static/Dynamic ( 4 ) |
| (EU) type-approval mark or -number of — drawbar eyes, coupling heads or similar coupling devices that shall be attached to the mechanical coupling (in the case of hinged or rigid drawbars) — type-approval mark or –number of mechanical couplings that shall be attached to the ladder frame /trailer hitch support (if restricted to certain types):’; | … |
38.6.
Component type-approval for a mechanical coupling granted under UNECE Regulation No 55 (OJ L 227, 28.8.2010, p. 1), with relevant documentation included in the information document: yes/no/not applicable (4)
Annotations
Textual amendments
- F1
- F2
- F3