Appendix 8 F1
United Kingdom
Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) the installation of rear-view mirrors as a system
A.
GENERAL INFORMATION
2.
GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
2.1.
Make(s) (trade name(s) of manufacturer): …
F22.2.
Type ( 6 ): …
2.2.1.
Commercial name(s) (if available): …
2.2.2.
Type-approval number(s) (49) (if available): …
2.2.3.
Type-approval(s) issued on (date, if available): …
2.2.4.
For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (19): …
2.3.
Company name and address of manufacturer: …
2.3.1.
Name(s) and address(es) of assembly/manufacture plants: …
2.3.2.
Name and address of manufacturer's authorised representative (if any): …
2.4.
For systems and separate technical units, vehicle(s) for which they are intended for (21):
2.4.1.
Type (17): …
2.4.2.
Variant(s) (17): …
2.4.3.
Version(s) (17): …
2.4.4.
Commercial name(s) (if available): …
2.4.5.
Category, subcategory and speed index of the vehicle (2): …
18.
REAR-VIEW MIRRORS
18.1.
Number and class(es) of the mirrors: …
18.2.
Requirements under UNECE Regulation No 46 (OJ L 177, 10.7.2010, p. 211) are met with the relevant documentation included in the information document: yes/no/not applicable (4)
18.3.
Requirements under UNECE Regulation No 81 (OJ L 185, 13.7.2012, p. 1) are met with the relevant documentation included in the information document: yes/no/not applicable (4)
18.4.
Drawing(s) for the identification of the mirror showing the position of the mirror relative to the vehicle structure: …
18.5.
Details of the method of attachment including that part of the vehicle structure to which it is attached: …
18.6.
Brief description of the electrical/electronic components of the adjustment system: …
18.7
Technical description of the defrosting and demisting system of the mirrors: …
18.8.
Optional equipment that might restrict the field of vision to the rear: …
18.9.
Field of vision for rear view mirror(s) of class II
18.9.1.
Complies with point 5.1 of Annex IX to Commission Delegated Regulation (EU) 2015/208: yes/no (4).
18.9.2.
Alternatively to entry 18.9.1, requirements under ISO 5721-2:2014 (Agricultural tractors — Requirements, test procedures and acceptance criteria for the operators field of vision — Part 2: Field of vision to the side and to the rear) are met with relevant documentation included in the information document: yes/no (4).
19.
DEVICES FOR INDIRECT VISION OTHER THAN MIRRORS (OPTIONAL)
19.1.
Type and characteristics (such as a complete description of the device): …
19.2.
In the case of a camera-monitor device, the detection distance (mm), contrast, luminance range, glare correction, display performance (black and white/colour (4)), image repetition frequency, luminance reach of the monitor (4): …
19.3.
Sufficiently detailed drawings to identify the complete device, including installation instructions: …
19.4.
Requirements under ISO 5721-2:2014 (Agricultural tractors — Requirements, test procedures and acceptance criteria for the operators field of vision — Part 2: Field of vision to the side and to the rear) are met with relevant documentation included in the information document: yes/no (4)
Annotations
Textual amendments
- F1
- F2