OpenLegislation

Division 38.5 F1

United Kingdom

Original text. Later amendments are not shown.

Description of the mechanical coupling:

Type (according to Appendix 1 of Annex XXXIV to Commission Delegated Regulation (EU) 2015/208): …
Make: …
Manufacturer’s type designation: …
Maximum horizontal load/D-Value ( 4 ) ( 44 ): … kg/kN ( 4 )
Towable mass (T) ( 4 ) ( 44 ): … tonnes
Maximum permissible vertical load on the coupling point (S) ( 44 ): … kg
Photographs and scale drawings of the coupling device. These drawings shall in particular show the required dimensions in detail as well as the measurements for mounting the device.
Short technical description of the coupling device specifying the type of construction and the material used.
Type of Test Static/Dynamic ( 4 )

(EU) type-approval mark or -number of

  • drawbar eyes, coupling heads or similar coupling devices that shall be attached to the mechanical coupling (in the case of hinged or rigid drawbars)

  • type-approval mark or –number of mechanical couplings that shall be attached to the ladder frame /trailer hitch support (if restricted to certain types):

…

Annotations

Textual amendments

F1

Substituted by Commission Implementing Regulation (EU) 2016/1789 of 7 September 2016 amending Implementing Regulation (EU) 2015/504 with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles (Text with EEA relevance).

Notes on Annex I

Textual amendments

F2

Substituted by Commission Implementing Regulation (EU) 2018/986 of 3 April 2018 amending Implementing Regulation (EU) 2015/504 as regards the adaptation of the administrative provisions for the approval and market surveillance of agricultural and forestry vehicles to Stage V emission limits (Text with EEA relevance).