OpenLegislation

Division 2.5 Symbols with respect to the braking requirements relating to overload protectors

United Kingdom

Original text. Later amendments are not shown.

2.5.1. Dop

  • application force at the input side of the control device, at which the overload protector is activated

    • 2.5.2. Mop

  • brake torque at which the overload protector is activated (as declared by the manufacturer)

    • 2.5.3. MTop

  • minimum test braking torque in the case when an overload protector is fitted (according to point 6.2.2.2).

    • 2.5.4. Pop_min

  • force applied to the brake at which the overload protector is activated (according to point 6.2.2.1).

    • 2.5.5. Pop_max

  • maximum force (when the coupling head is pushed fully home) which is applied by the overload protector to the brake (according to point 6.2.2.3).

    • 2.5.6. pop_min

  • pressure applied to the brake at which the overload protector is activated (according to point 6.2.2.1).

    • 2.5.7. pop_max

  • maximum hydraulic pressure (when the coupling head is pushed fully home) which is applied by the overload protector to the brake actuator (according to point 6.2.2.3).

    • 2.5.8. PTop

  • minimum test brake force in the case when an overload protector is fitted (according to point 6.2.2.2).

    • 2.5.9. pTop

  • minimum test brake pressure in the case when an overload protector is fitted (according to point 6.2.2.2).