Article 15 ... Declaration of conformityF6

United Kingdom

The F1... declaration of conformity shall state that the fulfilment of the applicable essential health and safety requirements set out in Annex II has been demonstrated.

The F2... declaration of conformity shall have the model structure set out in Annex IX, shall contain the elements specified in the relevant modules set out in Annexes IV, VI, VII and VIII and shall be continuously updated. It shall be F3in English.

F43.

Where PPE is subject to more than one enactment requiring a declaration of conformity, the manufacturer must draw up a single declaration of conformity which identifies each enactment by its title.

By drawing up the F5... declaration of conformity, the manufacturer shall assume responsibility for the compliance of the PPE with the requirements laid down in this Regulation.

Annotations

Textual amendments

F1: Word in Art. 15(1) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(14)(a); 2020 c. 1, Sch. 5 para. 1(1)
F2: Word in Art. 15(2) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(14)(a); 2020 c. 1, Sch. 5 para. 1(1)
F3: Words in Art. 15(2) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(14)(b); 2020 c. 1, Sch. 5 para. 1(1)
F4: Art. 15(3) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(14)(c); 2020 c. 1, Sch. 5 para. 1(1)
F5: Word in Art. 15(4) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(14)(a); 2020 c. 1, Sch. 5 para. 1(1)
F6: Word in Art. 15 heading omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(14)(a); 2020 c. 1, Sch. 5 para. 1(1)