OpenLegislation

Division (89) The recording equipment shall detect faults through self-tests and built-in-tests, according to the following table:F1

United Kingdom

Original text. Later amendments are not shown.

Sub-assembly to testSelf-testBuilt-in-test
SoftwareIntegrity
Data memoryAccessAccess, data integrity
Card interface devicesAccessAccess
KeyboardManual check
Printer(up to manufacturer)Printout
DisplayVisual check

Downloading

(performed only during downloading)

Proper operation
SensorProper operationProper operation
Remote communication facilityProper operationProper operation
GNSS facilityProper operationProper operation
F2ITS interface (optional) Proper operation

Annotations

Textual amendments

F1

Substituted by Commission Implementing Regulation (EU) 2018/502 of 28 February 2018 amending Implementing Regulation (EU) 2016/799 laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance).

F2

Inserted by Commission Implementing Regulation (EU) 2018/502 of 28 February 2018 amending Implementing Regulation (EU) 2016/799 laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance).

Notes on Annex I C

Modifications

C1

Annex 1C modified (21.8.2023) by The Drivers’ Hours and Tachographs (Amendment) Regulations 2023 (S.I. 2023/739), regs. 1(1), 3, Sch.