Appendix 3 Detailed ISC reportF1

The following information shall be included in the detailed ISC report:

1. 1.

   the name and address of the manufacturer;

2. 2.

   the name, address, telephone and fax numbers and e-mail address of the responsible testing laboratory;

3. 3.

   the model name(s) of the vehicles included in the test plan;

4. 4.

   where appropriate, the list of vehicle types covered within the manufacturer's information, i.e. for tailpipe emissions, the in-service family group;

5. 5.

   the numbers of the type approvals applicable to these vehicle types within the family, including, where applicable, the numbers of all extensions and field fixes/recalls (re-works);

6. 6.

   details of extensions, field fixes/recalls to those type approvals for the vehicles covered within the manufacturer's information (if requested by the approval authority);

7. 7.

   the period of time over which the information was collected;

8. 8.

   the vehicle build period covered (e.g. vehicles manufactured during the 2017 calendar year);

9. 9.

   the ISC checking procedure, including:

   1. (i)

      vehicle sourcing method;

   2. (ii)

      vehicle selection and rejection criteria (including the answers to the table in Appendix 1, including photos);

   3. (iii)

      test types and procedures used for the programme;

   4. (iv)

      the acceptance/rejection criteria for the family group;

   5. (v)

      geographical area(s) within which the manufacturer has collected information;

   6. (vi)

      sample size and sampling plan used;

10. 10.

    the results of the ISC procedure, including:

    1. (i)

       identification of the vehicles included in the programme (whether tested or not). The identification shall include the Table in Appendix 1.

    2. (ii)

       test data for tailpipe emissions:

       • test fuel specifications (e.g. test reference fuel or market fuel),

       • test conditions (temperature, humidity, dynamometer inertia weight),

       • dynamometer settings (e.g. road load, power setting),

       • test results and calculation of pass/fail;

    3. (iii)

       test data for evaporative emissions:

       • test fuel specifications (e.g. test reference fuel or market fuel),

       • test conditions (temperature, humidity, dynamometer inertia weight),

       • dynamometer settings (e.g. road load, power setting),

       • test results and calculation of pass/fail.