OpenLegislation

Division 4.5.5.1

Original text. Later amendments are not shown.

The curve determined in paragraph 4.3.1.4.4. of this Sub-Annex shall be corrected to reference conditions as follows:

F*=f0− w1− K1+ f1v×1+ K0T− 20+ K2f2v2

where:

F*
  • is the corrected road load, N;

  • f0
  • is the constant term, N;

  • F1f1
  • is the coefficient of the first order term, N/(km/h);

  • f2
  • is the coefficient of the second order term, N/(km/h)2;

  • K0
  • is the correction factor for rolling resistance as defined in paragraph 4.5.2. of this Sub-Annex;

  • K1
  • is the test mass correction as defined in paragraph 4.5.4.of this Sub-Annex;

  • K2
  • is the correction factor for air resistance as defined in paragraph 4.5.1. of this Sub-Annex;

  • T
  • is the arithmetic average ambient atmospheric temperature, °C;

  • v
  • is vehicle velocity, km/h;

  • w1
  • is the wind resistance correction as defined in paragraph 4.5.3. of this Sub-Annex, N.

  • The result of the calculation ((f0 – w1 – K1) × (1 + K0 x (T-20))) shall be used as the target road load coefficient At in the calculation of the chassis dynamometer load setting described in paragraph 8.1. of this Sub-Annex.

    The result of the calculation (f1 x (1 + K0 x (T-20))) shall be used as the target road load coefficient Bt in the calculation of the chassis dynamometer load setting described in paragraph 8.1. of this Sub-Annex.

    The result of the calculation (K2 x f2) shall be used as the target road load coefficient Ct in the calculation of the chassis dynamometer load setting described in paragraph 8.1. of this Sub-Annex.

    Annotations

    Textual amendments

    F1

    Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).