OpenLegislation

Division 8.1.3.4

Original text. Later amendments are not shown.

For dynamometer load setting, two different methods may be used. If the vehicle is accelerated by the dynamometer, the methods described in paragraph 8.1.3.4.1. of this Sub-Annex shall be used. If the vehicle is accelerated under its own power, the methods in paragraphs 8.1.3.4.1. or 8.1.3.4.2. of this Sub-Annex shall be used. The minimum acceleration multiplied by speed shall be 6 m2/sec3. Vehicles which are unable to achieve 6 m2/s3 shall be driven with the acceleration control fully applied.

  1. 8.1.3.4.1Fixed run method
  2. 8.1.3.4.2Iterative method