OpenLegislation

Division 1.2.4.1.1 F1

Original text. Later amendments are not shown.

After the total cycle declared value of the CO2 mass emission is accepted, the arithmetic average of the phase-specific values of the test results in g/km shall be multiplied by the adjustment factor CO2_AF to compensate for the difference between the declared value and the test results. This corrected value shall be the type approval value for CO2.

CO2_AF=Declared valuePhase combined value

where:

Phase combined value=CO2aveL×DL+CO2aveM×DM+CO2aveH×DH+CO2aveexH×DexHDL+DM+DH+DexH

where:

CO2aveL
  • is the arithmetic average CO2 mass emission result for the L phase test result(s), g/km;

  • CO2aveM
  • is the arithmetic average CO2 mass emission result for the M phase test result(s), g/km;

  • CO2aveH
  • is the arithmetic average CO2 mass emission result for the H phase test result(s), g/km;

  • CO2aveexH
  • is the arithmetic average CO2 mass emission result for the exH phase test result(s), g/km;

  • DL
  • is theoretical distance of phase L, km;

  • DM
  • is theoretical distance of phase M, km;

  • DH
  • is theoretical distance of phase H, km;

  • DexH
  • is theoretical distance of phase exH, km.

  • Annotations

    Textual amendments

    F1

    Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).