OpenLegislation

Division 2.1.3.2.1 F1

Original text. Later amendments are not shown.

Where the manufacturer requests a background correction, these background levels shall be determined as follows:

  1. 2.1.3.2.1.1.

    The background value may be either calculated or measured. The maximum permissible background correction shall be related to the maximum allowable leak rate of the particle number measurement system (0,5 particles per cm3) scaled from the particle concentration reduction factor, PCRF, and the CVS flow rate used in the actual test;

  2. 2.1.3.2.1.2.

    Either the approval authority or the manufacturer may request that actual background measurements are used instead of calculated ones.

  3. 2.1.3.2.1.3.

    Where subtraction of the background contribution gives a negative result, the PN result shall be considered to be zero.

Annotations

Textual amendments

F1

Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).