Division 2.6.8.3.1 F1
The following tolerances shall be permitted between the actual vehicle speed and the prescribed speed of the applicable test cycles.
The tolerances shall not be shown to the driver:
- (a)
Upper limit: 2,0 km/h higher than the highest point of the trace within ± 1,0 second of the given point in time;
- (b)
Lower limit: 2,0 km/h lower than the lowest point of the trace within ± 1,0 second of the given time.
See Figure A6/2.
Speed tolerances greater than those prescribed shall be accepted provided the tolerances are never exceeded for more than 1 second on any one occasion.
There shall be no more than ten such deviations per test cycle.