OpenLegislation

Division 3.2.3.2.2.2.3 F1F2

Original text. Later amendments are not shown.

Calculating the weighted mean of the rolling resistances

RRx = (RRx,FA × mpx,FA) + (RRx,RA × (1 – mpx,FA))

where:

x
  • represents vehicle L, H or an individual vehicle.

  • RRL,FA and RRH,FA
  • are the actual RRCs of the front axle tyres on vehicles L and H respectively, kg/tonne;

  • RRind,FA
  • is the RRC value of the applicable tyre energy efficiency class in accordance with Table A4/2 of Sub-Annex 4 of the front axle tyres on the individual vehicle, kg/tonne;

  • RRL,RA, and RRH,RA
  • are the actual RRCs of the rear axle tyres on vehicles L and H respectively, kg/tonne;

  • RRind,RA
  • is the RRC value of the applicable tyre energy efficiency class in accordance with Table A4/2 of Sub-Annex 4 of the rear axle tyres on the individual vehicle, kg/tonne;

  • mpx,FA
  • is the proportion of the vehicle mass in running order on the front axle;

  • RRx shall not be rounded or categorised to tyre energy efficiency classes.

    Annotations

    Textual amendments

    F1

    Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).

    F2

    Inserted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).