Division 3.2.3.2.2.3.2 Alternative method for determination of aerodynamic influence of optional equipmentF1F2
At the request of the manufacturer and with approval of the approval authority, an alternative method (e.g. simulation, wind tunnel not fulfilling the criteria in Sub-Annex 4) may be used to determine Δ(CD × Af) if the following criteria are fulfilled:
- (a)
The alternative method shall fulfil an accuracy for Δ(CD × Af) of ± 0,015 m2 and, additionally, in the case that simulation is used, the Computational Fluid Dynamics method should be validated in detail such that the actual air flow patterns around the body, including magnitudes of flow velocities, forces, or pressures, are shown to match the validation test results;
- (b)
The alternative method shall be used only for those aerodynamic-influencing parts (e.g. wheels, body shapes, cooling system) for which equivalency was demonstrated;
- (c)
Evidence of equivalency shall be shown in advance to the approval authority for each road load family in the case that a mathematical method is used, or every four years in the case that a measurement method is used, and in any case shall be based on wind tunnel measurements fulfilling the criteria of this Annex;
- (d)
If the Δ(CD × Af) of a particular item of optional equipment is more than double the value of the optional equipment for which the evidence was given, aerodynamic drag shall not be determined by the alternative method; and
- (e)
In the case that a simulation model is changed, a revalidation shall be necessary.
Annotations
Textual amendments
- F1
- F2