OpenLegislation

Division (b) Distance determination of CSSE and CSSM

Original text. Later amendments are not shown.

The length of the constant speed segment CSSE shall be determined based on the percentage of the usable REESS energy UBESTP according to paragraph 4.4.2.1. of this Sub-Annex. The remaining energy in the traction REESS after dynamic speed segment DS2 shall be equal to or less than 10 per cent of UBESTP. The manufacturer shall provide evidence to the approval authority after the test that this requirement is fulfilled.

The length of the constant speed segment CSSM may be calculated using the following equation:

dCSSM=PERest− dDS1− dDS2− dCSSE

where:

PERest
  • is the estimated pure electric range of the considered PEV, km;

  • dDS1
  • is the length of dynamic speed segment 1, km;

  • dDS2
  • is the length of dynamic speed segment 2, km;

  • dCSSE
  • is the length of constant speed segment CSSE, km.

  • Notes on Division 3.4.4.2.1

    Textual amendments

    F1

    Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).

    Notes on Division 3.4.4.2.1.2

    Textual amendments

    F1

    Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).