OpenLegislation

Division 4.4.1.2.2 As an alternative to paragraph 4.4.1.2.1. of this Sub-Annex, the all-electric range city AERcity may be determined from the charge-depleting Type 1 test described in paragraph 3.2.4.3. of this Sub-Annex by driving the applicable WLTP test cycles according to paragraph 1.4.2.1. of this Sub-Annex. In that case, the charge-depleting Type 1 test by driving the applicable WLTP city test cycle shall be omitted and the all-electric range city AERcity shall be calculated using the following equation:

Original text. Later amendments are not shown.

AERcity=UBEcityECDC,city

where:

UBEcity
  • is the usable REESS energy determined from the beginning of the charge-depleting Type 1 test described in paragraph 3.2.4.3. of this Sub-Annex by driving applicable WLTP test cycles until the point in time where the combustion engine starts consuming fuel, Wh;

  • ECDC,city
  • is the weighted electric energy consumption of the pure electrically driven applicable WLTP city test cycles of the charge-depleting Type 1 test described in paragraph 3.2.4.3. of this Sub-Annex by driving applicable WLTP test cycle(s), Wh/km;

  • and

    F1UBEcity=∑k+1j=1ΔEREESS,j

    where:

    ΔEREESS,j
  • is the electric energy change of all REESSs during phase j, Wh;

  • j
  • is the index number of the considered phase;

  • k + 1
  • is the number of the phases driven from the beginning of the test until the point in time when the combustion engine starts consuming fuel;

  • and

    ECDC,city=∑j= 1ncity,peECDC,city,j× Kcity,j

    where:

    ECDC,city,j
  • is the electric energy consumption for the jth pure electrically driven WLTP city test cycle of the charge-depleting Type 1 test according to paragraph 3.2.4.3. of this Sub-Annex by driving applicable WLTP test cycles, Wh/km;

  • Kcity,j
  • is the weighting factor for the jth pure electrically driven applicable WLTP city test cycle of the charge-depleting Type 1 test according to paragraph 3.2.4.3. of this Sub-Annex by driving applicable WLTP test cycles;

  • j
  • is the index number of the pure electrically driven applicable WLTP city test cycle considered;

  • ncity,pe
  • is the number of pure electrically driven applicable WLTP city test cycles;

  • and

    Kcity,1=ΔEREESS,city,1UBEcity

    where:

    ΔEREESS,city,1 is the electric energy change of all REESSs during the first applicable WLTP city test cycle of the charge-depleting Type 1 test, Wh;

    and

    Kcity,j=1− Kcity,1ncity,pe− 1 for j= 2 to ncity,pe×

    Annotations

    Textual amendments

    F1

    Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).