OpenLegislation

Division 2.1 External REESS current measurement

Original text. Later amendments are not shown.

  1. 2.1.1The REESS current(s) shall be measured during the tests using a clamp-on or closed type current transducer. The current measurement system shall fulfil the requirements specified in Table A8/1 of this Sub-Annex. The current transducer(s) shall be capable of handling the peak currents at engine starts and temperature conditions at the point of measurement.
  2. 2.1.2Current transducers shall be fitted to any of the REESS on one of the cables connected directly to the REESS and shall include the total REESS current.
  3. 2.1.3Division 2.1.3