Appendix 3
United Kingdom
Hydrodynamic torque converter (TC) information document
| Information document no.: | Issue: Date of issue: Date of Amendment: |
pursuant to …
F1TC type/family (if applicable):
…
0.
GENERAL
0.1
Name and address of manufacturer
0.2
Make (trade name of manufacturer):
0.3
TC type:
0.4
TC family:
0.5
TC type as separate technical unit / TC family as separate technical unit
0.6
Commercial name(s) (if available):
0.7
Means of identification of model, if marked on the TC:
0.8
In the case of components and separate technical units, location and method of affixing of the F2GB approval mark:
0.9
Name(s) and address(es) of assembly plant(s):
0.10
Name and address of the manufacturer's representative:
PART 1
ESSENTIAL CHARACTERISTICS OF THE (PARENT) TC AND THE TC TYPES WITHIN A TC FAMILY
| Parent TC or | Family members | ||||
| TC type | #1 | #2 | #3 | ||
F30.0
GENERAL
0.1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.9.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.0
SPECIFIC TORQUE CONVERTER/TORQUE CONVERTER FAMILY INFORMATION
1.1
For hydrodynamic torque converter without mechanical transmission (serial arrangement).
1.1.1
Outer torus diameter
1.1.2
Inner torus diameter
1.1.3
Arrangement of pump (P), turbine (T) and stator (S) in flow direction
1.1.4
Torus width
1.1.5
Oil type according to test specification
1.1.6
Blade design
1.2
For hydrodynamic torque converter with mechanical transmission (parallel arrangement).
1.2.1
Outer torus diameter
1.2.2
Inner torus diameter
1.2.3
Arrangement of pump (P), turbine (T) and stator (S) in flow direction
1.2.4
Torus width
1.2.5
Oil type according to test specification
1.2.6
Blade design
1.2.7
Gear scheme and power flow in torque converter mode
1.2.8
Type of bearings at corresponding positions (if fitted)
1.2.9
Type of cooling/lubrication pump (referring to parts list)
1.2.10
Type of shift elements (tooth clutches (including synchronisers) OR friction clutches) at corresponding positions where fitted
1.2.11
Oil level according to drawing in reference to central axis
LIST OF ATTACHMENTS
| No.: | Description: | Date of issue: |
|---|---|---|
| 1 | Information on Torque Converter test conditions | … |
| 2 | … |
Annotations
Textual amendments
- F1
- F2
Words in Annex 6 Appendix 3 point 0.8 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 83(5)(d)
- F3