OpenLegislation

Division 3.1.1.13

United Kingdom

Original text. Later amendments are not shown.

The torque dependent loss coefficient for bearings,

fT,bear = 1 – ηbear = 1 – 0,995 = 0,005

and the torque dependent loss coefficient for the gear mesh

fT,gearmesh=Pm,lossPin=Pm,loss1Nm×1rads

shall be added to receive the total torque dependent loss coefficient fT for the transmission system:

fT = fT,gearmesh + fT,bear

where:

fT
  • Total torque dependent loss coefficient for the transmission system [-]

  • fT,bear
  • Torque dependent loss coefficient for the bearings [-]

  • fT,gearmesh
  • Torque dependent loss coefficient for the gear meshes [-]

  • Pin
  • Fixed input power of the transmission; Pin = (1 Nm * 1 rad/s) [W]