OpenLegislation

Division 3.10.1.4

United Kingdom

Original text. Later amendments are not shown.

The air drag pre-processing tool considers the complete constant speed test invalid in the following cases:

  1. i..

    test track requirements as described in 3.1.1 not met

  2. ii..

    less than 10 datasets per heading available (high speed test)

  3. iii..

    less than 5 valid datasets per heading available (misalignment calibration test)

  4. iv..

    the rolling resistance coefficients (RRC) for the first and the second low speed test differ more than 0,40 kg/t. This criterion is checked for each combination of measurement section and driving direction separately.

Notes on Division 3

Textual amendments

F1

Substituted by Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance).