OpenLegislation

Division 3.4 Measurement equipment

United Kingdom

Original text. Later amendments are not shown.

The calibration laboratory shall comply with the requirements of either ISO/TS 16949, ISO 9000 series or ISO/IEC 17025. All laboratory reference measurement equipment, used for calibration and/or verification, shall be traceable to national (international) standards.

  1. 3.4.1Torque
  2. 3.4.2Vehicle speed
  3. 3.4.3Reference signal for calculation of rotational speed of the wheels at the driven axle
  4. 3.4.4Opto-electronic barriers
  5. 3.4.5(D)GPS system
  6. 3.4.6Stationary weather station
  7. 3.4.7Mobile anemometer
  8. 3.4.8Temperature transducer for ambient temperature on vehicle
  9. 3.4.9Proving ground temperature

Notes on Division 3

Textual amendments

F1

Substituted by Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance).