OpenLegislation

Division 3.3 Measurement provisions

United Kingdom

Original text. Later amendments are not shown.

The tyre manufacturer shall test either in a laboratory of Technical Services as defined in F1Article 68 of Regulation (EU) 2018/858 which carry out in its own facility the test referred to in paragraph 3.2, or in its own facilities in the case:

  1. (i)

    of the presence and responsibility of a representative of a Technical Service designated by F2the approval authority, or

  2. (ii)

    the tyre manufacturer is designated as a technical service of Category A in accordance with F3Article 68(1)(a) of Regulation (EU) 2018/858.

Annotations

Textual amendments

F1

Words in Annex 10 point 3.3 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 83(8)(a)(i)

F2

Words in Annex 10 point 3.3(i) substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 83(8)(a)(ii)

F3

Words in Annex 10 point 3.3(ii) substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 83(8)(a)(iii)