OpenLegislation

Division 5 Measurement equipmentF1

United Kingdom

Original text. Later amendments are not shown.

All laboratory reference measurement equipment, used for calibration and verification, shall be traceable to national (international) standards. The calibration laboratory shall comply with the requirements of ISO 9000 series and either ISO/TS 16949 or ISO/IEC 17025.

  1. 5.1Torque
  2. 5.2Vehicle speed
  3. 5.3Gear engaged
  4. 5.4Rotational speed of the engine
  5. 5.5Rotational speed of the wheels at the driven axle
  6. 5.6Rotational speed of fan
  7. 5.7Fuel measurement system
  8. 5.8Vehicle weight
  9. 5.9General requirements for the on-board measurements

Annotations

Textual amendments

F1

Inserted by Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance).