OpenLegislation

Division 6.1.1.1 Verification of components, separate technical units or systems and input data and informationF1

United Kingdom

Original text. Later amendments are not shown.

The following checks shall be performed for the components, separate technical units and systems mounted on the vehicle:

  1. (a)

    Simulation tool data integrity: the integrity of the cryptographic hash of the manufacturer's records file in accordance with Article 9(3) re-calculated during the verification testing procedure with the hashing tool shall be verified by comparison with the cryptographic hash in the certificate of conformity;

  2. (b)

    Vehicle data: the vehicle identification number, axle configuration, selected auxiliaries and power take off technology shall match the selected vehicle;

  3. (c)

    Component, separate technical unit or system data: the certification number and the model type imprinted on the certificate of CO 2 emissions and fuel consumption related properties shall match the component, separate technical unit or system installed in the selected vehicle;

  4. (d)

    The hash of the simulation tool input data and the input information shall match the hash imprinted on the certificate of CO 2 emissions and fuel consumption related properties for the following components, separate technical units or systems:

    1. (i)

      engines;

    2. (ii)

      transmissions;

    3. (iii)

      torque converters;

    4. (iv)

      other torque transferring components;

    5. (v)

      additional driveline components;

    6. (vi)

      axles;

    7. (vii)

      body or trailer air drag;

    8. (viii)

      tyres.

Annotations

Textual amendments

F1

Inserted by Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance).