Division 6.1.2 Run in phaseF1

After the validation of input data in accordance with point 6.1.1, a run in phase up to maximum 15 000  km odometer reading may take place, with no need to use the reference fuel, if the odometer reading of the vehicle selected is below 15 000  km. In case of damage of any of the components, separate technical units or systems listed in point 6.1.1.1, the component, separate technical units or systems may be replaced by an equivalent component, separate technical units or systems with the same certification number. The replacement shall be documented in the test report.

All relevant components, separate technical units or systems shall be checked before the measurements to exclude unusual conditions, such as incorrect oil fill levels, plugged air filters or on-board diagnostic warnings.