OpenLegislation

Article 13 Standard values

United Kingdom

Original text. Later amendments are not shown.

1.

The standard values for transmissions shall be determined in accordance with Appendix 8 of Annex VI.

2.

The standard values for torque converters shall be determined in accordance with Appendix 9 of Annex VI.

3.

The standard values for other torque-transferring components shall be determined in accordance with Appendix 10 of Annex VI.

4.

The standard values for additional driveline components shall be determined in accordance with Appendix 11 of Annex VI.

5.

The standard values for axles shall be determined in accordance with Appendix 3 of Annex VII.

6.

The standard values for a body or trailer air drag shall be determined in accordance with Appendix 7 of Annex VIII.

7.

The standard values for auxiliaries shall be determined in accordance with Annex IX.

F18.

The standard value for tyres shall be the one for C3 snow tyres as set out in Table 2 of Part B of Annex II to Regulation (EC) No 661/2009 of the European Parliament and of the Council f1 .

Annotations

Textual amendments

F1

Substituted by Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance).

Footnotes

f1

Regulation (EC) No 661/2009 of the European Parliament and of the Council of 13 July 2009 concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor ( OJ L 200, 31.7.2009, p. 1 ).