Division 9.4.5.4.3 Exhaust gas cooling
United Kingdom
Diluted exhaust gas upstream of a dilute flow meter may be cooled, as long as all the following provisions are observed:
- (a)
PM shall not be sampled downstream of the cooling;
- (b)
If cooling causes exhaust gas temperatures above 475 K (202 °C) to decrease to below 453 K (180 °C), HC shall not be sampled downstream of the cooling;
- (c)
If cooling causes aqueous condensation, NOx shall not be sampled downstream of the cooling unless the cooler meets the performance verification in point 8.1.11.4;
- (d)
If cooling causes aqueous condensation before the flow reaches a flow meter, dew point, T dew and pressure p total shall be measured at the flow meter inlet. These values shall be used in emission calculations in accordance with Annex VII.