OpenLegislation

Division 3.8.2.1 Transient (NRTC and LSI-NRTC) test cycles and RMC

United Kingdom

Original text. Later amendments are not shown.

The particulate specific emissions shall be calculated by transforming equation (7-128) into equation (7-132) where e gas [g/kWh] and m gas [g/test] are substituted by e PM [g/kWh] and m PM [g/test] respectively:

e PM = m PM W act (7-132)

Where:

m PM

  • total mass of particulates emission, calculated according to point 3.7.1 [g/test]

    • W act

  • cycle work [kWh]

    • The emissions on the transient composite cycle (i.e. cold-start NRTC and hot-start NRTC) shall be calculated as shown in point 3.8.1.1.