Division 4.2.1 Use-specific instructions for use

The product must be brought to a temperature above 20 °C before use.

Open a can containing the RTU product and insert a suction tube of the automated dipping-system. Avoid discharge of surplus fluids.

After milking, the vacuum is shut off and the teat dip is injected into a manifold on the clawpiece. The teats are coated with ca. 5 mL of dip when the teat cup is withdrawn by the Automatic Cluster Removal (ACR). After the removal of the ACR, every liner of the automated dipping-system is thoroughly rinsed with water and blown out with compressed air.

In a final cleaning step after each milking session of the herd, the liners are disinfected (e.g. with a chlorine-based product) and blown out again with compressed air.

Leave the product on the teats until next milking. Keep the animals standing for at least 5 minutes after treatment.

Afterwards, the milking system is ready for the next milking event.

The whole process is automated.