Commission Regulation (EU) 2019/2020 of 1 October 2019 laying down ecodesign requirements for light sources and separate control gears pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulations (EC) No 244/2009, (EC) No 245/2009 and (EU) No 1194/2012 (Text with EEA relevance) (revoked)
EU Regulation 2019/2020 · Adopted 1 October 2019 · Extends to United Kingdom
Commission Regulation (EU) 2019/2020
of 1 October 2019
laying down ecodesign requirements for light sources and separate control gears pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulations (EC) No 244/2009, (EC) No 245/2009 and (EU) No 1194/2012
(Text with EEA relevance) (revoked)
F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annotations to the whole text
Textual amendments
- F1
Regulation revoked (E.W.S.) (1.10.2021) by The Ecodesign for Energy-Related Products and Energy Information (Lighting Products) Regulations 2021 (S.I. 2021/1095), reg. 19(e)
Contents
- 1Subject matter and scope Repealed
- 2Definitions Repealed
- 3Ecodesign requirements Repealed
- 4Removal of light sources and separate control gears Repealed
- 5Conformity assessment Repealed
- 6Verification procedure for market surveillance purposes Repealed
- 7Circumvention Repealed
- 8Indicative benchmarks Repealed
- 9Review Repealed
- 10Repeal Repealed
- 11Entry into force and application Repealed
- Signature
- Annex IDefinitions applicable for the Annexes Repealed
- Annex IIEcodesign requirements Repealed
- 1Energy efficiency requirements: Repealed
- 2Functional requirements Repealed
- 3Information requirements Repealed
- Annex III: Exemptions Repealed
- 1This Regulation shall not apply to light sources and separate control gears specifically tested and approved to operate: Repealed
- 2In addition, this Regulation shall not apply to: Repealed
- 3Any light source or separate control gear within the scope of this Regulation shall be exempt from the requirements of this Regulation, with the exception of the information requirements set out in point 3(e) of Annex II, if they are specifically designed and marketed for their intended use in at least one of the following applications: Repealed
- 4Division 4 Repealed
- Annex IVVerification procedure for market surveillance purposes Repealed
- Annex VFunctionality after endurance testing Repealed
- Annex VIBenchmarks Repealed
1Subject matter and scopeF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2DefinitionsF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3Ecodesign requirementsF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4Removal of light sources and separate control gearsF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5Conformity assessmentF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6Verification procedure for market surveillance purposesF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7CircumventionF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8Indicative benchmarksF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9ReviewF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10RepealF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11Entry into force and applicationF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Signature
F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex IDefinitions applicable for the AnnexesF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex IIEcodesign requirementsF1
For the purposes of compliance and verification of compliance with the requirements of this Regulation, measurements and calculations shall be made using harmonised standards the reference numbers of which have been published for this purpose in the Official Journal of the European Union, or other reliable, accurate and reproducible methods, which take into account the generally recognised state-of-the-art.
1Energy efficiency requirements:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2Functional requirementsF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3Information requirementsF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1This Regulation shall not apply to light sources and separate control gears specifically tested and approved to operate:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2In addition, this Regulation shall not apply to:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3Any light source or separate control gear within the scope of this Regulation shall be exempt from the requirements of this Regulation, with the exception of the information requirements set out in point 3(e) of Annex II, if they are specifically designed and marketed for their intended use in at least one of the following applications:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex IVVerification procedure for market surveillance purposesF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex VFunctionality after endurance testingF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex VIBenchmarksF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .