Division 1.1 Verification procedure for requirements established in Annex II, point B.1F1

The model shall be considered to comply with the applicable requirements if:

1. (a)

   the ABC of the product is enabled by default and persists in all SDR modes, except in the shop configuration;

2. (b)

   the measured on mode power of the product decreases by 20 % or more when the ambient light condition measured at the ABC sensor is reduced from 100 lux to 12 lux;

3. (c)

   the ABC control of display luminance meets the requirements of Annex II, point B.1(e).