OpenLegislation

Division 2D Software

United Kingdom

Original text. Later amendments are not shown.

2D001

  • "Software", other than that specified in 2D002, as follows:

    1. a..

      "Software" specially designed or modified for the "development" or "production" of equipment specified in 2A001 or 2B001

    2. b..

      "Software" specially designed or modified for the "use" of equipment specified in 2A001.c., 2B001 or 2B003 to 2B009.

    Note: 2D001 does not control part programming "software" that generates "numerical control" codes for machining various parts.

    • 2D002

  • "Software" for electronic devices, even when residing in an electronic device or system, enabling such devices or systems to function as a "numerical control" unit, capable of co-ordinating simultaneously more than four axes for "contouring control".

    Note 1: 2D002 does not control "software" specially designed or modified for the operation of items not specified in Category 2.

    Note 2: 2D002 does not control "software" for items specified in 2B002. See 2D001 and 2D003 for "software" for items specified in 2B002.

    Note 3: 2D002 does not control "software" that is exported with, and the minimum necessary for the operation of, items not specified in Category 2.

    • 2D003

  • "Software", designed or modified for the operation of equipment specified in 2B002, that converts optical design, workpiece measurements and material removal functions into "numerical control" commands to achieve the desired workpiece form.

    • 2D101

  • "Software" specially designed or modified for the "use" of equipment specified in 2B104, 2B105, 2B109, 2B116, 2B117 or 2B119 to 2B122.

    N.B. SEE ALSO 9D004.

    • 2D201

  • "Software" specially designed for the "use" of equipment specified in 2B204, 2B206, 2B207, 2B209, 2B219 or 2B227.

    • 2D202

  • "Software" specially designed or modified for the "development", "production" or "use" of equipment specified in 2B201.

    Note: 2D202 does not control part programming "software" that generates "numerical control" command codes but does not allow direct use of equipment for machining various parts.

    • 2D351

  • "Software", other than that specified in 1D003, specially designed for "use" of equipment specified in 2B351.