Annex

Annex I to Regulation (EU) 2018/956 is amended as follows:

1. (1)

   Part A is amended as follows:

   1. (a)

      point (d) is replaced by the following:

      ‘(d)

      for vehicles registered until 31 December 2019 where available, and for vehicles registered from 1 January 2020 in all cases, the code for the bodywork as specified in entry 38 of the certificate of conformity, including, where applicable, the supplementing digits referred to in Appendix 2 to Annex II to Directive 2007/46/EC;’

   2. (b)

      the following point (f) is added:

      ‘(f)

      for vehicles registered from 1 January 2020, the maximum speed of the vehicle as specified in entry 29 of the certificate of conformity.’

2. (2)

   in Part B, point 2 is amended as follows:

   1. (a)

      entry 5 is replaced by the following:

      No	Monitoring parameters	Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified	Description
      ‘5	Axle certification number	1.7.2	Axle specifications’;

   2. (b)

      entry 15 is replaced by the following:

      No	Monitoring parameters	Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified	Description
      ‘15	Make (trade name of manufacturer)	—	Vehicle specifications’;

   3. (c)

      entry 21 is replaced by the following:

      No	Monitoring parameters	Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified	Description
      ‘21	Fuel type (Diesel CI/CNG PI/LNG PI …)	1.2.7	Engine specifications’;

   4. (d)

      entry 73 is replaced by the following:

      No	Monitoring parameters	Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified	Description
      ‘73	Cryptographic hash of the manufacturer's records file	3.1.4	Software information’;

   5. (e)

      the following entries 79 to 100 are added:

      Data entries 85, 86, 87, 90, 93, 95 and 96 shall not be made publicly available in the Central Register on heavy-duty vehicles.’
      No	Monitoring parameters	Source Part I of Annex IV to Regulation (EU) 2017/2400, unless otherwise specified	Description
      ‘79	Vehicle model	1.1.2	Vehicle specifications
      80	Vocational vehicle (yes/no)	1.1.9
      81	Zero emission heavy-duty vehicle (yes/no)	1.1.10
      82	Hybrid electric heavy-duty vehicle (yes/no)	1.1.11
      83	Dual-fuel vehicle (yes/no)	1.1.12
      84	Sleeper cab (yes/no)	1.11.13
      85	Engine modelf1	1.2.1	Engine specifications
      86	Transmission model	1.3.1	Transmission specifications
      87	Retarder model	1.4.1	Retarder specifications
      88	Retarder certification number	1.4.2
      89	Certification option used for generation of a loss map (standard values/measurement)	1.4.3
      90	Torque converter model	1.5.1	Torque converter specifications
      91	Torque converter certification number	1.5.2
      92	Certification option used for generation of a loss map (standard values/measurement)	1.5.3
      93	Angle drive model	1.6.1	Angle drive specifications
      94	Angle drive certification number	1.6.2
      95	Axle model	1.7.1	Axle specifications
      96	Air drag model	1.8.1	Aerodynamics
      97	Engine stop-start during vehicle stops (yes/no)	1.12.1	Advanced driver assistance systems (ADAS)
      98	Eco-roll without engine stop-start (yes/no)	1.12.2
      99	Eco-roll with engine stop-start (yes/no)	1.12.3
      100	Predictive cruise control (yes/no)	1.12.4