Council Regulation (EU) 2019/999 of 13 June 2019 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

Vanillic Acid (CAS RN 121-34-6) containing

• not more than 10 ppm of Palladium (CAS RN 7440-05-3),

• not more than 10 ppm of bismuth (CAS RN 7440-69-9),

• not more than 14 ppm of formaldehyde (CAS RN 50-00-0),

• not more than 1,3 % by weight of 3,4-dihydroxybenzoic acid (CAS RN 99-50-3),

• not more than 0,5 % by weight of vanillin (CAS RN 121-33-5)

Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) preparation, in a form of dry powder, containing by weight:

• 16 % or more but not more than 25 % of Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2),

• 65 % or more but no more than 75 % of aluminium hydroxide (CAS RN 21645-51-2)

Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) preparation, in a form of dry powder, containing by weight:

• 16 % or more but not more than 21 % of Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1),

• 65 % or more but no more than 69 % of aluminium hydroxide (CAS RN 21645-51-2)

Preparation containing by weight:

• 15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and

• 10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,

dissolved in:

• Methyl ethyl ketone (CAS RN 78-93-3),

• Heptane (CAS RN 142-82-5), and

• Toluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)

Mixture containing by weight:

• 25 % or more but not more than 55 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9),

• not more than 20 % of other organic compounds,

• on a carrier of polypropylene (CAS RN 9003-07-0) or amorphous silica (CAS RN 7631-86-9 or 112926-00-8)

Spherical catalyst consisting of a support of aluminium oxide coated with platinum, with

• a diameter of 1,4 mm or more but not more than 2,0 mm, and

• a platinum content by weight of 0,2 % or more but not more than 0,5 %

Catalyst

• containing 0,3 gram per litre or more, but not more than 7 gram per litre of precious metals,

• deposited on a ceramic honeycomb structure coated with aluminium oxide or cerium/zirconium oxide, the honeycomb structure having,

• a nickel content of 1,26 % by weight or more, but not more than 1,29 % by weight,

• 62 cells per cm² or more, but not more than 140 cells per cm²,

• a diameter of 100 mm or more, but not more than 120 mm, and

• a length of 60 mm or more, but not more than 150 mm,

for use in the production of motor vehicles^f1

Catalyst in powder form consisting by weight of

• 92,50 % (± 2) % titanium dioxide (CAS RN 13463-67-7),

• 5 % (± 1) % silicon dioxide (CAS RN 112926-00-8), and

• 2,5 % (± 1,5) % sulphur trioxide (CAS RN 7446-11-9)

Buffer cartridge not exceeding 8000 ml containing:

• 0,05 % or more but not more than 0,1 % by weight of 5-Chloro-2-methyl-2,3-dihydroisothiazol-3-one (CAS RN 55965-84-9), and

• 0,05 % or more but not more than 0,1 % by weight of 2-Methyl-2,3-dihydroisothiazol-3-one (CAS RN 2682-20-4) as a biostatic

Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:

• a width of 98 mm or more but not more than 170 mm,

• a thickness of 15 μm or more but not more than 36 μm,

of a kind used for the manufacture of alkaline battery separators

Synthetic elastomeric filament yarn:

• untwisted or with a twist not exceeding 50 turns per metre, measuring 300 dtex or more but not more than 1 000 dtex,

• composed of polyurethane ureas based on a copolyether glycol of tetrahydrofuran and 3-methyltetrahydrofuran,

for use in the manufacture of disposable hygiene products of heading 9619

Plates of sodalime glass of STN (Super Twisted Nematic) quality having:

• a length of 300 mm or more but not more than 600 mm,

• a width of 300 mm or more but not more than 600 mm,

• a thickness of 0,5 mm or more but not more than 1,1 mm,

• an indium-tin-oxide coating with a resistance of 80 Ohms or more, but not more than 160 Ohms on one side,

• a multi layer anti-reflection-coating on the other side, and

• machined (chamfered) edges,

of a kind used in the manufacture of LCD (liquid crystal display) modules

ex 7019 40 00

ex 7019 52 00

70

30

E-fibre glass fabrics:

• having a weight of 20 g/m² or more, but not more than 214 g/m²,

• impregnated with silane,

• in rolls,

• having a humidity content by weight of 0,13 % or less, and

• having not more than 3 hollow fibres out of 100 000 fibres,

for the exclusive use in the manufacture of prepregs and copper clad laminates

Epoxy resin coated glass woven fabric containing by weight:

• 91 % or more but not more than 93 % of glass fibres,

• 7 % or more but not more than 9 % of epoxy resin

ex 7410 11 00

ex 8507 90 80

ex 8545 90 90

10

60

30

Roll of laminate foil of graphite and copper, with:

• a width of 610 mm or more but not more than 620 mm, and

• a diameter of 690 mm or more but not more than 710 mm,

for use in the manufacture of lithium-ion electric rechargeable batteries

Aluminium foil, in rolls:

• coated with polypropylene on one side and with polyamide on the other side with adhesive layers between,

• with a width of 200 mm or more, but not more than 400 mm,

• with a thickness of 0,138 mm or more, but not more than 0,168 mm,

for use in the manufacture of lithium-ion battery cell pouches

Titanium alloy ingot,

• with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3cm or more,

• a weight of 680 kg or more,

containing alloy elements by weight of:

• 3 % or more but not more than 6 % of aluminium,

• 2,5 % or more but not more than 5 % of tin,

• 2,5 % or more but not more than 4,5 % of zirconium,

• 0,2 % or more but not more than 1 % of niobium,

• 0,1 % or more but not more than 1 % of molybdenum,

• 0,1 % or more but not more than 0,5 % of silicon

Titanium alloy ingot,

• with a diameter of 63,5 cm or more and a length of 450 cm or more,

• a weight of 6 350 kg or more,

containing alloy elements by weight of:

• 5,5 % or more but not more than 6,7 % of aluminium,

• 3,7 % of more but not more than 4,9 % of vanadium

Mechanical or electromechanical steering column lock:

• with a height of 10,5 cm (± 3 cm),

• with a width of 6,5 cm (± 3 cm),

• in a metal housing,

• whether or not with a holder,

for use in the manufacture of goods of Chapter 87

Support bracket for an exhaust system:

• with a thickness of 0,7 mm or more but not more than 1,3 mm,

• of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,

• whether or not with mounting holes,

for use in the manufacture of exhaust systems for automobiles

The air intake module for engine cylinders consisting of:

• a suction pipe,

• a pressure sensor,

• an electric throttle,

• hoses,

• brackets,

for use in the manufacture of goods of Chapter 87

Inlet manifold, exclusively for use in the manufacture of the motor vehicles with:

• a width of 40 mm or more but not more than 70 mm,

• valves length of 250 mm or more but not more than 350 mm,

• air volume of 5,2 litres, and

• an electrical flow control system that provides maximum performance at more than 3 200 rpm

The exhaust gas recirculation assembly consisting of:

• a control unit,

• an air throttle,

• an intake pipe,

• an outlet hose,

for use in the manufacture of diesel engines of motor vehicles

Tandem pump consisting of:

• an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1 000 revolutions per minute,

• vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of – 666 mbar in 6 seconds at 750 revolutions per minute,

for use in the manufacture of engines of motor vehicles

Electric vacuum pump with:

• Controller Area Network (CAN bus),

• whether or not with a rubber hose,

• a connecting cable with connector,

• a mounting bracket,

for use in the manufacture of goods of Chapter 87

Radial fan, with:

• a dimension of 25 mm (height) × 85 mm (width) × 85 mm (depth),

• a weight of 120 g,

• a rated voltage of 13,6 VDC (direct current voltage),

• an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage),

• a rated current of 1,1 A (TYP),

• a rated power of 15 W,

• a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4 800 RPM (revolutions per minute) (free flow),

• an air flow of not more than 17,5 litre/s,

• an air pressure of not more than16 mm H2O ≈ 157 Pa,

• an overall sound pressure of not more than 58 dB(A) at 4 800 RPM (revolutions per minute), and

with a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems

Mechanical switches for connecting electrical circuits, with:

• a voltage of 14,4 V or more but not more than 42 V,

• an amperage of 10 A or more but not more than 42 A,

for use in the manufacture of machines falling within heading 8467

Two-way flow control valve with housing, with:

• at least 5, but not more than 10 outlet holes with at least 0,09 mm, but not more than 0,2 mm diameter,

• at least 550 cm³/minute, but not more than 2 000 cm³/minute flow rate,

• at least 19, but not more than 300 MPa operating pressure

Flow-control valve

• made of steel,

• with an outlet hole with a diameter of at least 0,1 mm, but not more than 0,3 mm,

• with an inlet hole with a diameter of at least 0,4 mm, but not more than 1,3 mm,

• with chromium nitride coating,

• with a surface roughness of Rp 0,4

Electromagnetic valve for quantity control with

• a plunger,

• a solenoid with a of coil resistance of at least 2,6 Ohm, but not more than 3 Ohm

Electromagnetic valve for quantity control

• with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH

ex 8481 80 79

ex 8481 80 99

30

30

Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with:

• a withstanding pressure of the valve body of 6,3 MPa,

• a leakage ratio of less than 1,6 g/a,

• an impurity ratio of less than 1,2 mg/PCS,

• an airtight pressure of the valve body of 4,2 MPa,

for use in the manufacture of air conditioners

Motors for air pumps, with:

• operating voltage of 9 VDC or more but not more than 24 VDC,

• operating temperature range of – 40 °C or more but not more than 80 °C,

• an output not exceeding 18 W,

for use in the manufacture of pneumatic support and ventilation systems for car seats

ex 8501 31 00

ex 8501 32 00

55

40

DC motor with or without commutator, with

• an external diameter of 24,2 mm or more, but not more than 140 mm,

• a rated speed of 3 300 rpm or more, but not more than 26 200 rpm,

• a rated supply voltage of 3,6 V or more, but not more than 230 V,

• an output power of more than 37,5 W, but not more than 2 400 W,

• a free load current of not more than 20,1 A,

• a maximum efficiency of 50 % or more,

for driving hand-held power tools or lawn mowers

AC traction motor of an output of 75 kW or more but not more than 375 kW, with:

• a torque output of 200 Nm or more but not more than 400 Nm,

• a power output of 50 kW or more but not more than 200 kW, and

• a speed of not more than 15 000 rpm,

for use in the manufacture of electric vehicles

Stator for brushless motor, with:

• an internal diameter of 206,6 mm (± 0,5),

• an external diameter of 265,0 mm (± 0,2), and

• a width of 37,2 mm or more but not more than 47,8 mm,

of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums

Prismatic lithium-ion electric accumulators with:

• a width of 173,0 mm (± 0,4 mm),

• a thickness of 45,0 mm (± 0,4 mm),

• a height 125,0 mm (± 0,3 mm),

• a nominal voltage of 3,67 V (± 0,01 V), and

• a nominal capacity of 94 Ah and/or 120 Ah,

for use in the manufacture of rechargeable electric vehicle batteries

Cylindrical lithium-ion-accumulators or modules with:

• a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,

• a nominal voltage of 36 V or more, but not more than 48 V,

• a power of 300 Wh or more, but not more than 648 Wh,

for use in the manufacture of electric bicycles

Rectangular lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:

• a length of not more than 1 600 mm,

• a width of not more than 448 mm,

• a height of not more than 395 mm,

• a weight of 125 kg or more but not more than 135 kg,

• a nominal voltage of 280 V or more but not more than 400 V,

• a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,

• a charging voltage of 110 V or more but not more than 230 V, and

• containing 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,

for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703

Lithium-ion accumulator, with:

• a length of 150 mm or more, but not more than 1 000 mm,

• a width of 100 mm or more, but not more than 1 000 mm,

• a height of 200 mm or more, but not more than 1 500 mm,

• a weight of 75 kg or more, but not more than 200 kg,

• a nominal capacity not less than 150 Ah and not more than 500 Ah

Modules for the assembly of batteries of ion lithium electric accumulators with:

• a length of 298 mm or more, but not more than 408 mm,

• a width of 33,5 mm or more, but not more than 209 mm,

• a height of 138 mm or more, but not more than 228 mm,

• a weight of 3,6 kg or more, but not more than 17 kg, and

• a power of 458 Wh or more, but not more than 2 158 Wh

Lithium-ion rechargeable batteries, with:

• a length of 700 mm or more, but not more than 2 820 mm,

• a width of 935 mm or more, but not more than 1 660 mm,

• a height of 85 mm or more, but not more than 700 mm,

• a weight of 250 kg or more, but not more than 700 kg,

• a power of not more than 175 kWh

Lithium-ion Rectangular modules for incorporation in lithium-ion rechargeable batteries:

• of a length of 300 mm or more, but not more than 350 mm,

• of a width of 79,8 mm or more, but not more than 225 mm,

• of a height of 35 mm or more, but not more than 168 mm,

• of a weight of 3,95 kg or more, but not more than 8,85 kg,

• with a rating of 66,6 Ah or more, but not more than 129 Ah

Printed circuit board assembly comprising:

• a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities,

• a microprocessor capable of receiving remote control messages and controlling the tuner chipset,

for use in the manufacture of home entertainment systems

Electronic assembly comprising at least a printed circuit board with:

• processors for multi-media applications and video signal processing,

• FPGA (Field Programmable Gate Array),

• Flash memory,

• operating memory,

• USB-interface,

• with or without HDMI, VGA- and RJ-45 interfaces,

• sockets and plugs for connecting a LCD-display, a LED lighting and a control panel

Printed circuit board subassembly, comprising:

• a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly, with a signal decoder,

• a radio frequency (RF) remote control receiver,

• an infrared remote control signal transmitter,

• a SCART signal generator,

• a TV state sensor,

for use in the manufacture of home entertainment systems

LCD module, glass or plastic covered and optically bonded, with

• a diagonal measurement of the screen of 12 cm or more but not more than 31 cm,

• LED backlighting,

• a printed circuit board with EEPROM (Electrically Erasable Programmable Read-Only Memory), microcontroller, timing controller and other active and passive components,

• a plug for power supply and CAN (Controller Area Network) and LVDS (Low Voltage Differential Signalling) interfaces,

• whether or not with electronic components to generate additional control indicators for vehicle information on the display,

• with or without a touch screen,

• without a signal processing module,

• in a housing with additional LED indicators for warning lights,

• with or without a gear shift indicator and a photo sensor,

of a kind used as a driver information display in motor vehicles of Chapter 87

LCD display with:

• a touch panel,

• at least one printed circuit board for simple slave device pixel addressing (Timing Controller function) and touch control, with EEPROM (Electrically Erasable Programmable Read-Only Memory) for display settings,

• a diagonal screen measurement of 15 cm or more but not more than 21 cm,

• a backlight,

• a LVDS (Low Voltage Differential Signalling) and a power supply connector,

for use in the manufacture of motor vehicles of Chapter 87

Semiconductor module switch in a casing:

• consisting of an IGBT transistor chip and a diode chip on one or more lead frames,

• for a voltage of 600 V or 1 200 V

Programmable memory control board with:

• 4 or more stepper motor drivers,

• 4 or more outputs with MOSFET transistors,

• a main processor,

• 3 or more inputs for temperature sensors,

• for a voltage of 10 V or more but not more than 30 V,

for use in the manufacture of 3D printers

Electronic control units for controlling inter axle torque transferring in all-wheel drive vehicles including:

• a printed circuit board with programmable memory controller,

• one single connector, and

• working at 12 V

Electronic control units able to control automatic continuous variable transmission for passenger vehicles including:

• a printed circuit board with programmable memory controller,

• a metallic housing,

• one single connector,

• working at 12 V

Electronic Engine Control Unit (ECU) with:

• a printed circuit board (PCB),

• 12 Volts voltage,

• reprogrammable,

• a micro-processor that can control, evaluate and manage support service functions in cars (injection and ignition advance values of fuel, fuel and air flow rate),

for use in the manufacture of goods of Chapter 87

ex 8708 40 20

ex 8708 40 50

60

50

Automatic transmission assembly with rotary gear shifter with:

• aluminium casting housing,

• differential gear,

• 9 Speed automatic,

• electronic range select gear selection system,

with dimensions of:

• a width of 330 mm or more but not more than 420 mm,

• a height of 380 mm or more but not more than 450 mm,

• a length of 580 mm or more but not more than 690 mm,

for use in the manufacture of the vehicles in heading 87

ex 8708 50 20

ex 8708 50 99

ex 8708 99 10

ex 8708 99 97

60

15

45

65

Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising at least:

• an actuator, and

• an interior distribution by chain

ex 8708 50 20

ex 8708 50 99

65

20

Intermediate steel shaft connecting the gearbox with semi-axle with:

• a length of 300 mm or more but not more than 650 mm,

• a spline end on both sides,

• whether or not with a pressed bearing in the case,

• whether or not with a holder,

for use in the manufacture of goods of Chapter 87

ex 8708 50 20

ex 8708 50 99

70

25

Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:

• an outer diameter of 67,0 mm or more but not more than 84,5 mm,

• 3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,

• sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,

• spline with 21 teeth or more but not more than 35,

• bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves

ex 8708 50 20

ex 8708 50 99

75

35

Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:

• an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,

• an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38,

• a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, and

• with a grease compartment,

capable of working at constant speed at variable articulation angle not higher than 50 degrees

Aluminium suspension link arm, with dimensions of:

• a height of 50 mm or more but not more than 150 mm,

• a width of 10 mm or more but not more than 100 mm,

• a length of 100 mm or more but not more than 600 mm,

• a mass of 1 000 g or more but not more than 3 000 g,

equipped with at least two bushed holes made of aluminium alloy with the following characteristics:

• a tensile strength of 200 mPa or more,

• a strength of 19 kN or more,

• a stiffness of 5 kN/mm or more but not more than 9 kN/mm,

• a frequency of 400 Hz or more but not more than 600 Hz

Exhaust system inner liner:

• with a wall thickness of 0,7 mm or more but not more than 1,3 mm,

• made of stainless steel sheets or coil class 1.4310 and 1.4301 according to norm EN 10088,

• whether or not with mounting holes,

for use in the manufacture of exhaust systems for automobiles

Pipe for guiding exhaust gases from the combustion engine:

• with a diameter of 40 mm or more but not more than 100 mm,

• with a length of 90 mm or more but not more than 410 mm,

• with a wall thickness of 0,7 mm or more but not more than 1,3 mm,

• of stainless steel,

for use in the manufacture of exhaust systems for automobiles

Exhaust system end cover:

• with a wall thickness of 0,7 mm or more but not more than 1,3 mm,

• made of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,

• whether or not with inner liner,

• whether or not with surface treatment,

for use in the manufacture of exhaust systems for automobiles

Infrared lens with motorised focus adjustment,

• using wavelengths of 3 μm or more but not more than 5 μm,

• providing a clear picture from 50 m to infinity,

• with fields of vision sizes of 3° × 2,25° and 9° × 6,75°,

• with a weight of not more than 230 g,

• with a length of not more than 88 mm,

• with a diameter of not more than 46 mm,

• athermalized,

for use in the manufacture of thermal imaging cameras, infrared binoculars, weapons scopes

Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:

• a horizontal field of view range to a maximum of 120 deg,

• a diagonal field of view range to a maximum of 92 deg,

• a focal length to a maximum of 7,50 mm,

• a relative aperture of a maximum of F/2,90,

• a maximum diameter of 22 mm,

of a kind used for the production of CMOS (Complementary metal–oxide-semiconductor) automotive cameras

Infrared optical unit composed of

• a monocrystalline silicon lens with a diameter of 84 mm (± 0,1 mm), and

• a monocrystalline germanium lens with a diameter of 62 mm (± 0,05 mm),

assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras

Infrared optical unit composed of

• a silicon lens with a diameter of 29 mm (± 0,05 mm), and

• a monocrystalline calcium fluoride lens with a diameter of 26 mm (± 0,05 mm),

assembled on a machined aluminium alloy support, of kind a used for thermal imaging cameras

Infrared optical unit

• with a silicon lens of a diameter of 62 mm (± 0,05 mm),

• mounted on a machined aluminium alloy support,

of a kind used for thermal cameras

Infrared optical unit composed of

• a germanium lens with a diameter of 11 mm (± 0,05 mm),

• a monocrystalline calcium fluoride lens with a diameter of 14 mm (± 0,05 mm), and

• a silicon lens with a diameter of 17 mm (± 0,05 mm),

assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras

Infrared optical unit

• with a silicon lens with a diameter of 26 mm (± 0,1 mm),

• mounted on a machined aluminium alloy support,

of a kind used for thermal imaging cameras

Infrared optical unit composed of

• a germanium lens with a diameter of 19 mm (± 0,05 mm),

• a monocrystalline calcium fluoride lens with a diameter of 18 mm (± 0,05 mm),

• a germanium lens with a diameter of 20,6 mm (± 0,05 mm),

assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras

ex 9029 20 31

ex 9029 90 00

20

30

Clustered instrument panel with the microprocessor control board, with or without stepping motors, and LED indicators showing at least:

• speed,

• engine revolutions,

• engine temperature,

• the fuel level,

communicating via CAN-BUS and/or K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87