Division 3 Fire protection equipment
United Kingdom
| Number and item designation | Regulation SOLAS 74 as amended, and the relevant resolutions and circulars of the IMO, as applicable | Testing standards | Modules for conformity assessment | First placing on the market | Last placing on board |
|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 |
| MED/3.1 Primary decks covering Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.2 Portable fire extinguishers Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.3a Fire-fighter's outfit: protective clothing (close proximity clothing): Protective non reflective clothing for firefighting. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.3b Fire-fighter's outfit: protective clothing (close proximity clothing): Protective clothing for firefighting: Reflective clothing for specialised fire-fighting. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.3c Fire-fighter's outfit: protective clothing (close proximity clothing): Protective clothing for firefighting: Protective clothing with a reflective outer surface. Row 1 of 1 | Type approval requirements
|
Note: Level 2. | B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.4 Fire-fighter's outfit: boots Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.5 Fire-fighter's outfit: gloves Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.6 Fire-fighter's outfit: helmet Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.7 Self-contained compressed-air-operated breathing apparatus Note: For use in accidents involving dangerous goods a positive pressure type mask is required. (Refer to item 7.1) Row 1 of 1 | Type approval requirements
| ISO 23269-2:2011 (firefighting - maritime use only). Type 1 mask shall not be used in either MED/3.7 or MED/7.1. Note: Associated fireproof lifeline requested by ISO 23269 § 4.28 shall be MED certified as item MED 3.44 and used in conjunction with the breathing apparatus and capable of being attached by means of a snap-hook to the harness of the apparatus or to a separate belt in order to prevent the breathing apparatus becoming detached when the lifeline is operated. The breathing apparatus module B shall indicate the MED fireproof lifeline as mandatory combined component. | B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.8 Compressed air line breathing apparatus Row 1 of 2 | Type approval requirements
|
Or:
| B+D B+E B+F | 13.3.2021 (II) | |
| Carriage and performance requirements
| |||||
| MED/3.8 Compressed air line breathing apparatus Row 2 of 2 | Type approval requirements
|
Or:
| B+D B+E B+F | 13.9.2019 | |
| Carriage and performance requirements
| |||||
| MED/3.9 Sprinkler systems components for accommodation spaces, service spaces and control stations equivalent to that referred to in SOLAS 74 Reg. II-2/12 (limited to nozzles and their performance). (Nozzles for fixed sprinkler systems, for high speed craft (HSC) are included under this item). Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.10 Nozzles for fixed pressure water spraying fire extinguishing systems for machinery spaces and cargo pump-rooms Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.11a 'A' & 'B' Class divisions fire integrity: 'A' class divisions. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.11b 'A' & 'B' Class divisions fire integrity: 'B' class divisions. Note: Excludes restricted B-Class divisions/doors. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.12 Devices to prevent the passage of flame into the cargo tanks in tankers Row 1 of 2 | Type approval requirements
|
| For equipment other than valves: B+D B+E B+F For valves: B+F | 23.5.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.12 Devices to prevent the passage of flame into the cargo tanks in tankers Row 2 of 2 | Type approval requirements
|
| For equipment other than valves: B+D B+E B+F For valves: B+F | 19.6.2018 | |
| Carriage and performance requirements
| |||||
| MED/3.13 Non-combustible materials Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.14, Materials other than steel for pipes penetrating “A” and “B” Class divisions – Item included in MED/3.26 and MED/3.27. | |||||
| MED/3.15a Materials other than steel for pipes conveying oil or fuel oil: plastic pipes and fittings. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.15b Materials other than steel for pipes conveying oil or fuel oil: valves. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.15c Materials other than steel for pipes conveying oil or fuel oil: flexible pipe assemblies and compensators. Row 1 of 2 | Type approval requirements
| Flexible pipe assemblies:
| B+D B+E B+F | 1.7.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.15c Materials other than steel for pipes conveying oil or fuel oil: flexible pipe assemblies and compensators. Row 2 of 2 | Type approval requirements
|
| B+D B+E B+F | 19.6.2018 | |
| Carriage and performance requirements
| |||||
| MED/3.15d Materials other than steel for pipes conveying oil or fuel oil: metallic pipe components with resilient and elastomeric seals. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.16 Fire Doors Note: Excludes restricted B-Class divisions/doors. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.17 Fire door control systems components. Note: When the term "system components" is used it may be that a single component, a group of components or a whole system needs to be tested to ensure that the international requirements are fulfilled. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.18a Surface materials and floor coverings with low flame-spread characteristics: decorative veneers. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.18b Surface materials and floor coverings with low flame-spread characteristics: paint systems. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.18c Surface materials and floor coverings with low flame-spread characteristics: floor coverings. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.18d Surface materials and floor coverings with low flame-spread characteristics: pipe insulation covers. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.18e Surface materials and floor coverings with low flame-spread characteristics: adhesives used in the construction of 'A', 'B' & 'C' class divisions. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.18f Surface materials and floor coverings with low flame-spread characteristics: combustible ducts membrane. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.19 Draperies, curtains and other suspended textile materials and films Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.20
Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | 12.8.2023 (I) | |
| Carriage and performance requirements
| |||||
| MED/3.20a Upholstered furniture: complete piece of furniture (including cover material, filling material and non-flammable rack). Row 1 of 1 (NEW ROW) | Type approval requirements
|
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.20b Upholstered furniture: cover material for any filling material. Row 1 of 1 (NEW ROW) | Type approval requirements
|
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.20c Upholstered furniture: cover material for flame-retardant filling material (tested in specific combination as intended for further application). Row 1 of 1 (NEW ROW) | Type approval requirements
|
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.20d Upholstered furniture: flame-retardant filling material. Row 1 of 1 (NEW ROW) | Type approval requirements
|
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.21 Bedding components Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.22 Fire dampers Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| Item MED/3.23, Non-combustible duct penetrations through ‘A’ class divisions - Item deliberately left blank. | |||||
| Item MED/3.24, Electric cable transits through ‘A’ class divisions — Item deliberately left blank. | |||||
| MED/3.25 "A" and "B" class fire proof windows and side scuttles Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.26a Penetrations through 'A' class divisions: electric cable transits. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.26b Penetrations through 'A' class divisions: pipe, duct, trunk, etc. penetrations. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.27a Penetrations through 'B' class divisions: electric cable transits, Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.27b Penetrations through 'B' class divisions: pipe, duct, trunk, etc. penetrations. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.28 Sprinkler systems (limited to sprinkler heads). (Nozzles for fixed sprinkler systems, for high speed craft (HSC) are included under this item). Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 1 | Type approval requirements
|
Or:
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.29 Fire-fighting hoses: Non-percolating lay flat firefighting hoses (range of the inside diameter from 25 mm to 52 mm). Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.30 Portable oxygen analysis and gas detection equipment Row 1 of 4 | Type approval requirements
|
And as applicable to:
| B+D B+E B+F | 16.3.2017 | 28.2.2020 (II) |
| Carriage and performance requirements
| |||||
| MED/3.30 Portable oxygen analysis and gas detection equipment Row 2 of 4 | Type approval requirements
|
And as applicable to:
| B+D B+E B+F | 19.6.2018 | 6.7.2021 (II) |
| Carriage and performance requirements
| |||||
| MED/3.30 Portable oxygen analysis and gas detection equipment Row 3 of 4 | Type approval requirements
|
And as applicable to:
| B+D B+E B+F | 6.7.2021 (II) | |
| Carriage and performance requirements
| |||||
| MED/3.30 Portable oxygen analysis and gas detection equipment Row 4 of 4 (NEW ROW) | Type approval requirements
|
And as applicable to:
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| Item MED/3.31, Nozzles for fixed sprinkler systems for high speed craft ((HSC), deleted as it is covered by MED/3.9 and MED/3.28. | |||||
| MED/3.32 Fire restricting materials (except furniture) for high speed craft Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.33 Fire restricting materials for furniture for high speed craft Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.34 Fire resisting divisions for high speed craft Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.35 Fire doors on high speed craft Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.36 Fire dampers on high speed craft Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.37a Penetrations through fire resisting divisions on high speed craft: electric cable transits. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.37b Penetrations through fire resisting divisions on high speed craft: pipe, duct, trunk etc. penetrations. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.38 Portable fire-extinguishing equipment for lifeboats and rescue boats Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.39 Nozzles for equivalent water-mist fire extinguishing systems for machinery spaces and cargo pump rooms Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.40 Low-location lighting systems (components only) Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.41 Emergency escape breathing devices (EEBD) Row 1 of 1 | Type approval requirements
|
and alternatively:
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.42a Inert gas systems: Whole system. Row 1 of 1 (NEW ITEM) | Type approval requirements
|
| G | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.42b Inert gas system: Single components. Note: Equipment regarded as inert gas system components under MED/3.42b are in general:
Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.43 Nozzles for deep fat cooking equipment fire extinguishing systems (automatic or manual type). Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 2 | Type approval requirements
|
| B+D B+E B+F | 15.11.2018 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.43 Nozzles for deep fat cooking equipment fire extinguishing systems (automatic or manual type). Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 2 of 2 | Type approval requirements
|
| B+D B+E B+F | 16.3.2017 | |
| Carriage and performance requirements
| |||||
| MED/3.44 Fire-fighters outfit – lifeline Row 1 of 2 | Type approval requirements
|
| B+D B+E B+F | 3.9.2022 (II) | |
| Carriage and performance requirements
| |||||
| MED/3.44 Fire-fighters outfit – lifeline Lifelines for breathing apparatus approved under item MED/3.7 and item MED/7.1 Row 2 of 2 | Type approval requirements
|
| B+D B+E B+F | 13.9.2019 | |
| Carriage and performance requirements
| |||||
| MED/3.45 Equivalent fixed gas fire extinguishing systems components (extinguishing medium, head valves and nozzles) for machinery spaces and cargo pump rooms Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.46 Equivalent fixed gas fire extinguishing systems for machinery spaces (aerosol systems) Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.47 Concentrate for fixed high expansion foam fire extinguishing systems for machinery spaces and cargo pump rooms. Note: The fixed high expansion foam fire extinguishing system (including those systems which use inside air from their working spaces for their intended performance), for machinery spaces and cargo pump rooms must still be tested with the approved concentrate to the satisfaction of the Administration. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.48 Fixed water based local application fire-fighting systems components for use in category A machinery spaces (Nozzles and performance tests). Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.49a Fixed water-based fire-fighting systems for roro spaces, vehicle spaces and special category spaces: Prescriptive-based systems as per IMO MSC.1/Circ.1430. Row 1 of 2 | Type approval requirements
|
| B+D B+E B+F | 1.1.2024 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.49a Fixed water-based fire-fighting systems for roro spaces, vehicle spaces and special category spaces: Prescriptive-based systems as per IMO MSC.1/Circ.1430, Revision 1. Row 2 of 2 (NEW ROW) | Type approval requirements
|
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.49b Fixed water-based firefighting systems for roro spaces, vehicle spaces and special category spaces: Performance-based systems as per IMO MSC.1/Circ. 1430, Row 1 of 2 | Type approval requirements
|
| B+D B+E B+F | 1.1.2021 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.49b Fixed water-based firefighting systems for roro spaces, vehicle spaces and special category spaces: Performance-based systems as per IMO MSC.1/Circ. 1430, Revision 1. Row 2 of 2 (NEW ROW) | Type approval requirements
|
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.50, Protective clothing resistant to chemical attack, - item moved to MED/9/3.9. | |||||
| MED/3.51a Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Control and indicating equipment Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 3 | Type approval requirements
| Electrical installations in ships:
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 1.6.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.51a Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Control and indicating equipment Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 2 of 3 | Type approval requirements
| Electrical installations in ships:
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 16.3.2017 | 1.1.2020 (III) |
| Carriage and performance requirements
| |||||
| MED/3.51a Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Control and indicating equipment Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 3 of 3 | Type approval requirements
| Electrical installations in ships:
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 19.6.2018 | |
| Carriage and performance requirements
| |||||
| MED/3.51b Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Power supply equipment. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 1.6.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.51b Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Power supply equipment. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 2 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 16.3.2017 | 1.1.2020 (III) |
| Carriage and performance requirements
| |||||
| MED/3.51b Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Power supply equipment. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 3 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 19.6.2018 | |
| Carriage and performance requirements
| |||||
| MED/3.51c Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Heat detectors - Point detectors. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 4 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 1.6.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.51c Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Heat detectors - Point detectors. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 2 of 4 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 16.3.2017 | 28.2.2020 (III) |
| Carriage and performance requirements
| |||||
| MED/3.51c Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Heat detectors - Point detectors. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 3 of 4 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 19.6.2018 | 12.8.2023 (III) |
| Carriage and performance requirements
| |||||
| MED/3.51c Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Heat detectors - Point detectors. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 4 of 4 (NEW ROW) | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.51d Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Smoke detectors: Point detectors using scattered light, transmitted light or ionization. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 2 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 31.8.2022 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.51d Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (d) Smoke detectors: Point detectors using scattered light, transmitted light or ionization. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 2 of 2 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 13.9.2019 | |
| Carriage and performance requirements
| |||||
| MED/3.51e Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Flame detectors: Point detectors. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 1.6.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.51e Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Flame detectors: Point detectors. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 2 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 16.3.2017 | 1.1.2020 (III) |
| Carriage and performance requirements
| |||||
| MED/3.51e Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Flame detectors: Point detectors. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 3 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 19.6.2018 | |
| Carriage and performance requirements
| |||||
| MED/3.51f Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Manual call points. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 1.6.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.51f Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Manual call points. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 2 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 16.3.2017 | 1.1.2020 (III) |
| Carriage and performance requirements
| |||||
| MED/3.51f Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Manual call points. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 3 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 19.6.2018 | |
| Carriage and performance requirements
| |||||
| MED/3.51g Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Short circuit isolators. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 1.6.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.51g Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Short circuit isolators. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 2 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 16.3.2017 | 1.1.2020 (III) |
| Carriage and performance requirements
| |||||
| MED/3.51g Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Short circuit isolators. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 3 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 19.6.2018 | |
| Carriage and performance requirements
| |||||
| MED/3.51h Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Input/output devices. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 1.6.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.51h Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Input/output devices. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 2 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 16.3.2017 | 1.1.2020 (III) |
| Carriage and performance requirements
| |||||
| MED/3.51h Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Input/output devices. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 3 of 3 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 19.6.2018 | |
| Carriage and performance requirements
| |||||
| MED/3.51i Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Cables. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 4 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 1.6.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.51i Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Cables. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 2 of 4 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 16.3.2017 | 22.5.2020 (III) |
| Carriage and performance requirements
| |||||
| MED/3.51i Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Cables. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 3 of 4 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
And/or: Fire Resistant Cables:
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 19.6.2018 | 28.3.2021 (III) |
| Carriage and performance requirements
| |||||
| MED/3.51i Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: Cables. Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 4 of 4 | Type approval requirements
|
And, as applicable, electrical and electronic installations in ships:
And/or: Fire Resistant Cables:
And, as applicable, electrical and electronic installations in ships:
| B+D B+E B+F | 13.9.2019 | |
| Carriage and performance requirements
| |||||
| MED/3.52 Non-portable and transportable fire extinguishers Row 1 of 2 | Type approval requirements
|
Or:
Or:
| B+D B+E B+F | 1.7.2020 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.52 Non-portable and transportable fire extinguishers Row 2 of 2 | Type approval requirements
|
Or:
Or:
| B+D B+E B+F | 13.9.2019 | |
| Carriage and performance requirements
| |||||
| MED/3.53 Fire alarm devices – Sounders Row 1 of 3 | Type approval requirements
|
| B+D B+E B+F | 1.6.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.53 Fire alarm devices – Sounders Row 2 of 3 | Type approval requirements
|
| B+D B+E B+F | 16.3.2017 | 12.8.2023 |
| Carriage and performance requirements
| |||||
| MED/3.53 Fire alarm devices – Sounders Row 3 of 3 (NEW ROW) | Type approval requirements
|
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.54 Fixed oxygen analysis and gas detection equipment Row 1 of 4 | Type approval requirements
|
And, as applicable, to:
For combined O2/HC systems, additionally:
| B+D B+E B+F | 1.6.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.54 Fixed oxygen analysis and gas detection equipment Row 2 of 4 | Type approval requirements
|
And as applicable to:
For combined O2/HC systems, additionally:
| B+D B+E B+F | 16.3.2017 | 3.6.2020 (III) |
| Carriage and performance requirements
| |||||
| MED/3.54 Fixed oxygen analysis and gas detection equipment Row 3 of 4 | Type approval requirements
|
And as applicable to:
For combined O2/HC systems, additionally:
| B+D B+E B+F | 19.6.2018 | 12.8.2023 (III) |
| Carriage and performance requirements
| |||||
| MED/3.54 Fixed oxygen analysis and gas detection equipment Row 4 of 4 (NEW ROW) | Type approval requirements
|
And as applicable to:
For combined O2/HC systems, additionally:
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.55 Dual purpose type nozzles (spray/jet type) Row 1 of 2 | Type approval requirements
|
| B+D B+E B+F | 12.8.2023 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.55 Dual purpose type nozzles (spray/jet type) Row 2 of 2 (NEW ROW) | Type approval requirements
|
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.56 Fixed firefighting hose systems Hose reels with semi-rigid hose Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.57 Medium Expansion Foam Fire Extinguishing Systems components - Fixed Deck Foam for Tankers Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.58 Fixed Low Expansion Foam Fire Extinguishing Systems Components for Machinery Spaces and Tanker Deck Protection Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.59 Expansion Foam for Fixed Fire Extinguishing Systems for Chemical Tankers Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.60 Nozzles for fixed pressure water-spraying fire-extinguishing systems for cabin balconies Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.61a Inside air high expansion foam systems for the protection of machinery spaces, cargo pump rooms, vehicle and ro-ro spaces, special category spaces and cargo spaces Note: Inside/Outside air high expansion foam systems for the protection of machinery spaces, cargo pump rooms, vehicle and ro-ro spaces, special category spaces and cargo spaces shall be tested with the approved concentrate to the satisfaction of the Administration. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.61b Outside air high expansion foam systems for the protection of machinery spaces, cargo pump rooms, vehicle and ro-ro spaces, special category spaces and cargo spaces Note: Inside/Outside air high expansion foam systems for the protection of machinery spaces, cargo pump rooms, vehicle and ro-ro spaces, special category spaces and cargo spaces shall be tested with the approved concentrate to the satisfaction of the Administration. Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.62 Dry chemical powder extinguishing systems Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.63 Sample extraction smoke detection systems components Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 3 | Type approval requirements
|
And for:
And, as applicable, electrical and electronic installations in ships:
And, as applicable for explosive atmospheres:
| B+D B+E B+F | 1.6.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.63 Sample extraction smoke detection systems components Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 2 of 3 | Type approval requirements
|
And for:
And, as applicable, electrical and electronic installations in ships:
And, as applicable for explosive atmospheres:
| B+D B+E B+F | 19.6.2018 | 12.8.2023 (III) |
| Carriage and performance requirements
| |||||
| MED/3.63 Sample extraction smoke detection systems components Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 3 of 3 (NEW ROW) | Type approval requirements
|
And for:
And, as applicable, electrical and electronic installations in ships:
And, as applicable for explosive atmospheres:
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.64 C class divisions Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.65 Fixed hydrocarbon gas detection system Row 1 of 4 | Type approval requirements
|
| B+D B+E B+F | 1.6.2019 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.65 Fixed hydrocarbon gas detection system Row 2 of 4 | Type approval requirements
|
| B+D B+E B+F | 16.3.2017 | 21.7.2019 (III) |
| Carriage and performance requirements
| |||||
| MED/3.65 Fixed hydrocarbon gas detection system Row 3 of 4 | Type approval requirements
|
| B+D B+E B+F | 19.6.2018 | 12.8.2023. (III) |
| Carriage and performance requirements
| |||||
| MED/3.65 Fixed hydrocarbon gas detection system Row 4 of 4 (NEW ROW) | Type approval requirements
|
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.66 Evacuation guidance systems used as an alternative to low-location lighting systems Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.67 Helicopter facility foam fire-fighting appliances Row 1 of 2 | Type approval requirements
|
| B+D B+E B+F | 16.3.2017 | 12.8.2023 (II) |
| Carriage and performance requirements
| |||||
| MED/3.67 Helicopter facility foam fire-fighting appliances Row 2 of 2 (NEW ROW) | Type approval requirements
|
| B+D B+E B+F | 12.8.2020 | |
| Carriage and performance requirements
| |||||
| MED/3.68 Galley Exhaust Duct Fixed Fire Extinguishing Systems components Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 1 of 2 | Type approval requirements
|
| B+D B+E B+F | 30.4.2018 (III) | |
| Carriage and performance requirements
| |||||
| MED/3.68 Galley Exhaust Duct Fixed Fire Extinguishing Systems components Note: For products used as spare parts of existing installations the relevant standards at the time of placing on board can still be applied. Row 2 of 2 | Type approval requirements
|
| B+D B+E B+F | 16.3.2017 | |
| Carriage and performance requirements
| |||||
| MED/3.69 Mobile water monitor for ships constructed on or after 1 January 2016 designed to carry five or more tiers of containers on or above the weather deck Row 1 of 2 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.69 Mobile water monitor for ships constructed on or after 1 January 2016 designed to carry five or more tiers of containers on or above the weather deck Row 2 of 2 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.70 Fire-fighting hoses (Semi-rigid hoses for fixed systems) Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | ||
| Carriage and performance requirements
| |||||
| MED/3.71 Fixed firefighting hose systems
Row 1 of 1 | Type approval requirements
|
| B+D B+E B+F | 16.3.2017 | |
| Carriage and performance requirements
| |||||