OpenLegislation

Sensors and Lasers Sensors and Lasers

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

Camerasf1

a.

Instrumentation cameras, as follows:

  1. 1.

    High—speed cinema recording cameras using any film format from 8 mm to 16 mm inclusive, in which the film is continuously advanced throughout the recording period, and that are capable of recording at framing rates exceeding 13,150 frames per second;

    Note: This sub—head does not specify cinema recording cameras for normal civil purposes.

  2. 2.

    Mechanical high speed cameras, in which the film does not move, capable of recording at rates exceeding 1,000,000 frames per second for the full framing height of 35 mm film, or at proportionately higher rates for lesser frame heights, or at proportionately lower rates for greater frame heights;

  3. 3.

    Mechanical or electronic streak cameras with writing speeds exceeding 10 mm per microsecond;

  4. 4.

    Electronic framing cameras having a speed exceeding 1,000,000 frames per second;

  5. 5.

    Electronic cameras having:

    1. a.

      An electronic shutter speed (gating capability) of less than 1 microsecond per full frame; and

    2. b.

      A read out time allowing a framing rate of more than 125 full frames per second;

b.

Imaging cameras, as follows:

Note: Head b. of this entry does not specify television or video cameras specially designed for television broadcasting.

  1. 1.

    Video cameras incorporating solid state sensors, having any of the following;

    1. a.

      More than 4 × 106 active pixels per solid state array for monochrome (black and white) cameras;

    2. b.

      More than 4 × 106 active pixels per solid state array for colour cameras incorporating three solid state arrays; or

    3. c.

      More than 12 × 106 active pixels for solid state array colour cameras incorporating one solid state array;

  2. 2.

    Scanning cameras and scanning camera systems:

    1. a.

      Incorporating linear detector arrays with more than 8,192 elements per array; and

    2. b.

      Having mechanical scanning in one direction;

  3. 3.

    Incorporating image intensifiers specified in sub—head a.2.a. of this entry;

  4. 4.

    Incorporating focal plane arrays specified in sub—head a.3. of this entry.

Note: For cameras specially designed or modified for underwater use, see heads d. and e. of entry 8A002.

  1. 6AEquipment, Assemblies and Components
  2. 6A1Acoustics
  3. 26A001
  4. 26A002
  5. 36A002
  6. 46A002
  7. 16A005
  8. 26A005
  9. 36A005
  10. 26A005
  11. 36A005
  12. 46A005
  13. 56A005
  14. 66A005
  15. 76A005
  16. 26A005
  17. 26A005
  18. 36A005
  19. 46A005
  20. 26A005
  21. 36A005
  22. 46A005
  23. 36A005
  24. 46A005
  25. 6BTest, Inspection and Production Equipment
  26. 6CMaterials
  27. 6DSoftware
  28. 6ETechnology

Annotations

Footnotes

f1

See also Entry 6A203.